DIY - Dust Collector Centrifugal Air Blower [4K]
Вставка
- Опубліковано 14 гру 2020
- In this video, I make a Dust Extraction System. It's a way to get the dust out of my workshop. I am building many parts using 10mm plywood. I use the electric motor that I removed from an old fan.
There are many air blower videos on UA-cam. Very good videos, what I did was a dust collector Centrifugal Air blower that works quietly, though not very powerfully. It consumes very little electricity and works great. It easily collects and expels the wood dust in my workshop.
#airblower #diyairblower #dustcollector #centrifugalairblower #greensaw
You can find all dimensions in the pdf document.
➤PDF (dimensions-plan) download page : www.greensawdiy.com/dust-colle...
➤Tools/Supplies Used :
Quick Clamp : • Quick Clamp - Cam Clam...
Disc Sander : • Disc Sander Homemade 2...
➤Subscribe ua-cam.com/users/greensaw?sub...
➤My website : www.greensawdiy.com
➤Playlists:
DIY Tools: www.youtube.com/watch?v=PLZFz...
Clamps: • Bar Clamps making + Di...
Sanders : • Thickness - Drum Sande...
Wood Turning : • WoodTurning
Drilling Tools : • Drilling Tools
Wood Works : • Wood Works
Celaning : • DIY - Shop Vac - Part ...
Band Saw : • Band Saw Making - Part... - Навчання та стиль
What do you want to do with 65 watts? My razor will soon have so much! At least one zero is missing. And 3000 turns per minute!
My thought as well. I wouldn't go less then 1 HP for that size of propeller
My goal is not to blow a hurricane! A silent and continuously working dust collector.
@@GreenSaw With 65 watts, you can't even blow out a candle.
@@wernerpfeifer Do you know how many watts of home hoods for the kitchen above the stove? This is not a cyclone for a carpentry workshop .
@@iuriicebotari3656???
Синяя изолента! Теперь я совершенно спокоен за работоспособность агрегата!🤘🤩
Просто и наглядно. Зачёт!!!
С меня лайк и подписка на канал!
У меня в детстве был полуавтоматический диапроектор. Каретка пошла на перекос, заклинило, ну и как следствие - расплавился от галогенной лампы 150 W пластмассовый вентилятор охлаждения. Я его из плотной бумаги потом склеил точно по такому же принципу.
muchas gracias por todos tus proyectos, eres uno de los pocos que regala sus planos para que todos podamos construir nuestras maquinas.
donde están los planos ???
What a wonderful project, I'm thinking of making one for my woodworking shop.
Congratulations on the project.
Parabéns!!!
Excelente trabalho 👏🏾👏🏾
Человек по профессии столяр!!!👍 Всё во круг из дерева😉
и немного электрик, судя по синей изоленте
Un estupendo extractor económico, práctico y silencioso. Me gusta.Gracias.
Gracias, contento de que te guste.
Vraiment c'est formidable c'est ma patient merci bien .
Awesome project.
Thank you for sharing iy with us.
Wow!!! Great Idea!!! Well Done!!! Thank You Sir!!!! 👍😎😃
Parabéns um excelente projeto
Отличное приспособление и качественно выполненная работа для самоделки .
Good day mr greensaw.your invention is great and very usefull.how i wish to have one.youre so kind sharing such a wonderfull knowledge to everyone.God bless you and your family.from Calapan city,Oriental Mindoro PHILIPPINES
Bonjour superbe vidéo et toutes les renseignements approprié pour le fabriquer c'est une excellente idée bravo il le dire dans le bricolage ils y a des génies qui pourrait donner des cours aux ( dis professionnels que defois c'est des vrais guignols ) en tout cas bravo entres bricoleur on ce Comprend bonne journée à bientôt Bernard 👍👍👍
Come sempre un ottimo lavoro maestro
Хорошо придумал, молодец!
Great idea to clean the air and recycle a used motor, great job
Glad you like it. Thank you for your comment.
Parabéns!!!
Excelente trabalho !!!
Mükemmel alındı. Ellerine sağlık 🤘
Muy bueno tú trabajo !!! Felicitaciones !!!
tres beau travail plein d ingeniosite un grand bravo
First! I love the build! * I want one * ... Dust is a problem in my shop-
Bonjour merci beaucoup pour cette vidéo très bon travail à la portée de débutant bonne journée et bonne fête de fin d’année mon ami 🙏👍🙋♂️
Content que tu aimes ça. Merci pour votre commentaire.
Gran bel lavoro complimenti
Bonjour, excellente vidéo très utile👍👍 ! Encore merci pour le partage. Norbert (France)
Bonjour Norbert, je suis très content que vous l'aimiez. Merci pour ton beau commentaire.
Looks like a nice size tradeoff for improved noise reduction. I suspect it'd be really good for smaller tools such as a scrollsaw if you wanted to use it directed at a single tool, rather than to merely circulate.
Ficou show, vou fazer um desse
정말 멋져요
Exactly what I needed!
Excelente trabajo!!!!
Excelente. Muy bueno👏👏👏
Excellent Job!
Super idée. Fallait y penser.
Bravissimo, veramente molto interessante e soprattutto utile
Contento che ti piaccia. Grazie per il tuo commento.
Вещь годная 👍👏
excellent work👏👏👏
Fantástico vídeo y gracias por las medidas.
Me alegro de que te guste. Gracias por tu comentario.
Reconfigure your installation to get rid of that 90• elbow. Flex duct work is another thing to avoid if possible. Removing the elbow will make a huge improvement in the performance.
That’s all connected to the exhaust (outlet) end though right? From what I can see he didn’t hook any lines up to the part that actually sucks up the dust
Ótimo projeto
simple but effective - don't mind the ones that want always bigger - faster -louder ....i also prefer low-energy-consumption and silent solutions 👍🏻we do have enough machine that are crazy loud and every extra noise we don't add to them is a win - and btw for the very fine dust flying around in the workshop/ air that is a nice way to do it. but i admit if you want to use also a particle filter in the airstream the power may be not sufficient. 🤔 i'll have to check this -Anyway- well done & keep up
Thank you for your nice comment. Regards...
Молодец. Интересная самоделка !
Молодец. Интересная самоделка !
Супер Благодарю за проект очень круто
Я рад, что тебе понравилось. Спасибо за комментарий.
Very Nice, só good.
Útil e indispensable buenas noches gracias
Muito bom.
Só de limpar o ar já e ótimo.
Quero fazer um para aspirar o pó de Esmerilhadeira.Um problema dentro do ambiente.
forte,davvero un bel lavoro
Grazie contento che ti piaccia.
Muy bueno. Excelente
Very good my friend 🤗☺🖒
Good job Mate👍👍👍
excelente video, muy bien explicado. muchas gracias
Me alegra que te haya gustado, gracias por ver y dejar un comentario agradable.
Muhteşem eline sağlık 👍
Отлично получилось! Успехов!
Спасибо, рад, что тебе понравилось.
Me gusta, voy a desarrollarlo
Thank you.
ficou muito bom, parabéns!
Que bom que gostou, obrigado.
EXCELENTE...MUCHAS GRACIAS POR COMPARTIR SU TRABAJO...SALUDOS
Me alegro de que te guste. Gracias por tu bonito comentario.
excelente, sencillamente exce
Excelente
Gracias, muy necesario y importante
Gracias por ver mi vídeo y comentar. Con mi más profundo respeto.
Super gelungen. 👍🏼
Ein ganz toller Staubsammler. Kann ich in meiner Werkstatt auch gebrauchen.
LG Helmut #BeimBastler
Froh, dass Sie es mögen. Danke für deinen Kommentar.
Thanks!
COX GÜZEL ALINDI!
Merci beaucoup pour la vidéo
Merci. Mes meilleures salutations.
Well done! Good luck!
Thanks for watching. Glad you like it.
Muito bom fiz um parecido
Muito bom
Wow: mehrsprachige Untertitel. Gefällt mir. :-)
Best worker..nice looking your videos...best of top
Thanks for your beautiful comment. Glad you like it.
Fantástico
Parabéns.
Muito bom gostei e vou executar ,muito obrigado que Jeova olhei por vc é familia
Wow, nice idea! ;)
Thank you...
Güzel bir çalışma olmuş👍
Teşekkür ederim, beğenmenize çok sevindim.
Классная воздуходувка
Ustam eline emeğine sağlık muhteşem oldu.
Teşekkür ederim beğendiğine sevindim. Senden ses çıkmıyordu umarım iyisindir...
@@GreenSaw iyiyim çok şükür. Bi ara massenger'den resim atacam sana. Ustam dikkat et kendine Allah'a emanet.
mantap broo saya suka🙋👍👍👍
Super👷👍
Idéia pra eu colocar na minha cnc hehehe
Такой же, только железный.
Двух-скоростной, 1 кВт/2800 об., 180 Вт/800 об., в стальной бочке со съемной крышкой в качестве накопителя.
А этот - развалится через неделю использования от разбалансировки и общей хлипкости конструкции.
У меня первый то вариант, из стали 1 мм в разнос пошел. Балансированный, между прочим. Теперь из 1,5 мм стоит.
Very Nice, O like
Utile !
Хорошая робота.
Классная вещь.
Una idea excelente talvez mejor que la que yo tengo en mi pequeño taller. Dos ventiladores con las aspas invertidas y un tubo de 110mm conectado a la salida de humos del techo. Me gusta mucho más está idea, pasaré a elaborarla (con tu permiso, claro está) tan pronto como me sea posible. Un cordial saludo. ThinoKasal, Canary Slandd
Me alegro de que te guste. Gracias por tu comentario.
Le quedó una berraquera lo felicito , es posible poner las medidas Gracias.
Excelente video y económico, además de silencioso.
Thank you glad you like it.
Good
I tried using this motor (from a floor fan) for a spinning wheel. at a load much less than yours, it heated up very quickly. this motor only works with forced air cooling.
Hi, so many people make the encloser bigger than the propeller. I think there is wrong, because the part presure in this run just round this encloser without any effect. Maybe i am wrong but there is my opinion. Anyway good job. Greetings from Lech land.
Buenas,gran innovación, puede enviarme en pdf el plano
I have a motor from my old 1800w bench saw, is it possible to make one?
You killed it with that 90⁰ elbow. You need to find either a sweep 90⁰ (large radius) or to install two 45⁰ elbows to soften that turn, for improved efficiency. Just saying...
You're right, 90 degree elbows didn't do well. Thank you for your comment.
Right! Every tight 90 adds resistance equal to 10 feet of duct pipe.
Koçtaş poşeti görene kadar yabancı sandım videoyu :) Altyazıların İngilizcesi de hatasız. Tebrikler.
I work with exhaust fans for restaurants and you have a very excellent design if you were to put some type of Venturi on it that would increase the speed and you can use that to pipe to your equipment for dust collection
Thank you for your advice.
Not exactly speed as such but air flow pressure, however, the idea is just great.
I'd add to this excelent idea the use of some sort of light materials such as acrilyc or polycarbonate.
Thanks again for your work and for sharing it
Se parece al que usaron para la forja
Лайк, подписка, колокольчик и скачал документ и плюс ко всему отправил ссылку. Спасибо !🤝
Molto bello ,ho fatto uno simile ma a benzina 100cc però io le alette le ho direzionate al contrario. Secondo te ? Ciao Costantino Costantino
Восхищен! Пойдет ли такая конструкция для стружкоудаления? Или мощности всё-таки будет мало?
немного сильный
Belle conception, manque juste une sécurité primordiale, une grille pour éviter une main, un doigt où une feuille papier de rentrer par inavertance , pour la grille un cache de haut-parleur en récup où un volet amovible fait maison 💪
obrigado tenho de fazer um estudar o seu ajuda