Going to have to make modifications to suit your needs , going to make life better in long run. Use one to fill my feeders cause I'm to old to do it manually. Corn out of field, into bin, into trailer and finally into feeders. Few things I did ,placed battery pack on front mount then ran wires to it and plug into outlet to charge, also got electrical vibration unit mounted to help when corn is low. Already know you going to love it and the time and money it saves. Love your videos getting ready for turkey season here in Georgia.
Once you get the battery mounted for a short hoohup it will be fine. Looks like to me when the hopper gets low just close the hopper door a little as it goes down and it will pull feed out faster with vacuum. Altogether with the modifications that thing will be a dream. Keep these videos coming love em.
They make a 12 volt vibrator that will bolt on the hopper and it will help get all the feed out. Great equipment i like that. Bet it would work for cows and chickens and others as well. Be safe have a great day
It’d be nice if you could do away with the top auger and have the hose put on the bottom portion where your not having to erect that up and down and also add an electric or air vibrator to that hopper you could turn on when the feed gets low to help with the flow! Overall sweet rig tho.
Morning Bryan......Morning Jason...... Good Video and i would have bought a Corn Gravity Box and rigged it, to fill the feeders. Gravity works always. Electric pump etc not so much.
Maybe keeping a broom attached to it so you can get the last 50 pounds to feed through quicker without climbing down in it? It will also need something you can poke it with, sometimes it will bridge up and not feed in. Nice tool, hope it works well for ya.
Have you noticed any impact on your deer population with the added noise this generates? The general consensus in our club is that a blower would put too much pressure on the property and keep our deer skittish. Curious to hear your opinion.
Jason I wonder how it would if you only opened the door about 1/4to1/2 way instead of fully opened it might make it a slight slower but it also empty better, but it’s all trial and error at this stage til you work out the best way that suits you it looks like it’s going to help you heaps all the best with it Jason.
Sounds like a good deal! Maybe it will pay off for you. I know buying in bulk always saves money. I don’t know how the Polaris will hold up pulling that much weight but I believe you will figure it out. Have a good-un! Oh yes, not trying to be negative, just being cautious!
How about mounting some remote battery posts (like on the rear of a drag car) on the Ranger so you don't have to fool with the battery box? I can already see you shortening the hopper pipe with the sawzall!
jreclaim has a good ideal on the flex tub . you will lose a lot of corn when you let the arger down , and when you get ready to put it up agean it will have corn in it witch will add weight . with the tractor you could add a hyo. clinder to lift the arger
Dame y'all got so many toys always buying stuff must be nice. I'll be doing good just feed my animals sometimes. I still have to do it the old way buy hand. Me and my wife hand picked around 12 to 14 acres of corn we planted. No fancy toys no corn picker that's walking down each Road and picking ear corn with a bucket
If your dad's anything like mine he told you work smarter not harder they need call me a dumbass for doing it the hard way the first time write and then he showed me the right way to do it just remember I am using voice to text I am a survivor of multiple Strokes I am using speech to text and I do my best
@@HollisFarmsMS Thanks - I have a 11 pointer huge spread 6.5 on my property now and I want to gt him before he drops his antlers - season ends end of January
Hey jason.keep that clean out blown out with a air hose after a while the corn dust builds up a when it get a little moisture it turns into concrete just like a feeder.I ran some quick dis-connect cables made for jumper cables that mount in the grill of a truck,just ran them back to the rear works good
U should install a corn bin on the farm Jason.. have it filled once or twice a year. Back your need toy up under it and fill her up.. no back work at all! 😀
We have a Crustbuster tender similar to this. Running the wire to end of seed tube, relocate or put a 2nd on/off switch to end of tube because when it's full it's going to move some seed. When it gets low tap on side of hopper with rubber mallet, mite help empty out. That works with fertilizer tender. That's going to be a nice set up anyway you do it.
When u load it full it will come out faster Jason so no worries there .and you can get a peace of pvc pipe with a 90 with a short peace of pipe for filling the troffs
Going to have to make modifications to suit your needs , going to make life better in long run. Use one to fill my feeders cause I'm to old to do it manually. Corn out of field, into bin, into trailer and finally into feeders. Few things I did ,placed battery pack on front mount then ran wires to it and plug into outlet to charge, also got electrical vibration unit mounted to help when corn is low. Already know you going to love it and the time and money it saves. Love your videos getting ready for turkey season here in Georgia.
Thanks 👍👍
Awesome, working smarter not harder.
Thanks 👍
Once you get the battery mounted for a short hoohup it will be fine. Looks like to me when the hopper gets low just close the hopper door a little as it goes down and it will pull feed out faster with vacuum. Altogether with the modifications that thing will be a dream. Keep these videos coming love em.
Thanks 👍
Pete’s gonna miss the sack burning 🔥🐶. I bet you won’t. I think that is gonna save a lot of time and money. Good job on the video
Thanks 👍👍
@@HollisFarmsMS I like your
They make a 12 volt vibrator that will bolt on the hopper and it will help get all the feed out. Great equipment i like that. Bet it would work for cows and chickens and others as well. Be safe have a great day
Thanks 👍
It’d be nice if you could do away with the top auger and have the hose put on the bottom portion where your not having to erect that up and down and also add an electric or air vibrator to that hopper you could turn on when the feed gets low to help with the flow! Overall sweet rig tho.
Thanks 👍
Morning Bryan......Morning Jason...... Good Video and i would have bought a Corn Gravity Box and rigged it, to fill the feeders. Gravity works always. Electric pump etc not so much.
👍
Need a broom on the ranger to push out the last bit of corn,good video no more sack burning
Thanks 👍
Good morning. Got my gears turning on seeing if it'll work for the dogs.?? Your back will thank you in spades. Sukup hoppers are really nice.
👍
Maybe keeping a broom attached to it so you can get the last 50 pounds to feed through quicker without climbing down in it? It will also need something you can poke it with, sometimes it will bridge up and not feed in. Nice tool, hope it works well for ya.
Thanks 👍
Morning Jason, with a ton an half of feed you may have to pull it with the JD 🚜
👍
Nice feeder!! Maybe cut that stiff hose off about halfway or the whole way and put a flex pipe on it like it has up near the top of the hose.
👍
Have you noticed any impact on your deer population with the added noise this generates? The general consensus in our club is that a blower would put too much pressure on the property and keep our deer skittish. Curious to hear your opinion.
No
Jason I wonder how it would if you only opened the door about 1/4to1/2 way instead of fully opened it might make it a slight slower but it also empty better, but it’s all trial and error at this stage til you work out the best way that suits you it looks like it’s going to help you heaps all the best with it Jason.
Thanks 👍
Good moning Jason great video
Thanks 👍
Jason, 18 volt Milwaukee blower to push the feed into the auger, then you wouldn't have climb into the hopper to kick it in.
👍
Get you some 1500lbs bulk bags to store your corn in we use them for cow feed
👍
Awesome gonna save time and your back
Thanks 👍
LOOKS LIKE A BACK/TIME SAVER TO ME.
👍👍
Close your gate some when the feed gets low and it will pull it in better to the auger. See if that doesn't adjust your flow also.
👍
Sounds like a good deal! Maybe it will pay off for you. I know buying in bulk always saves money. I don’t know how the Polaris will hold up pulling that much weight but I believe you will figure it out. Have a good-un! Oh yes, not trying to be negative, just being cautious!
👍
That will be a back and money saver.
👍
You need a rubber flap on the end of the pipe to keep the corn to bounce out
👍
First thing I'd change on that Hopper wagon the be put a roll over tarp on it
👍
How about mounting some remote battery posts (like on the rear of a drag car) on the Ranger so you don't have to fool with the battery box? I can already see you shortening the hopper pipe with the sawzall!
👍👍
you can go to supper sacks or bends like you said. but when full that is 18000 lb. you will need to pull that with the tractor.
👍
jreclaim has a good ideal on the flex tub . you will lose a lot of corn when you let the arger down , and when you get ready to put it up agean it will have corn in it witch will add weight . with the tractor you could add a hyo. clinder to lift the arger
Add a male /female plug on ranger and hopper hook to battery short up the tube go up
👍
Try it with the door half way open, I bet it will do better.
👍
Dame y'all got so many toys always buying stuff must be nice. I'll be doing good just feed my animals sometimes. I still have to do it the old way buy hand. Me and my wife hand picked around 12 to 14 acres of corn we planted. No fancy toys no corn picker that's walking down each Road and picking ear corn with a bucket
Good 👍
I've often thought you'all were spending a lot of extra money on that bagged feed.
👍
Y’all showin’ out at Hollis farms!
👍
Looks like to me the more corn or protein you keep in the hopper the better it will work. What choo think? Good video Jason and Brian.
Thanks 👍
What size are you in your bean boots? Did you size it down or remained truthful to your size?
Truth 👍
Thank you. What about the shearling? Doesn’t it make the boots tighter?
That going to save you time and money!!!
👍
Take the solid plastic pipe off replace with flexible pipe
👍
once all that paint wears off it'll be functional.
👍
Man crack corn and that machine for a dove field😜
👍👍
If your dad's anything like mine he told you work smarter not harder they need call me a dumbass for doing it the hard way the first time write and then he showed me the right way to do it just remember I am using voice to text I am a survivor of multiple Strokes I am using speech to text and I do my best
Thanks 👍👍
Good deal!!
👍
Jason that's awesome man ! What type of protein pellets do you use?
Buck Booster
@@HollisFarmsMS ok thanks man!
Close door more wen it gets low help u too
👍
Pinch the door off some
Winona pilot.
👍
What age do you think the bucks peak at ? 6.5 ?
Around that 👍
@@HollisFarmsMS Thanks - I have a 11 pointer huge spread 6.5 on my property now and I want to gt him before he drops his antlers - season ends end of January
@@HollisFarmsMS so I am wondering what he may look like if I have to wait another year - been following him since he was a 6 pointer back in 2015
Nice rig! You could add another piece of flex hose on the end to make it easier for that type of feeder.
Thanks 👍
Hey jason.keep that clean out blown out with a air hose after a while the corn dust builds up a when it get a little moisture it turns into concrete just like a feeder.I ran some quick dis-connect cables made for jumper cables that mount in the grill of a truck,just ran them back to the rear works good
👍
Close the gate some , itll pick up better i believe thats what its for .
👍
Lol i am a manager for a sonic in texas thanks hollis farms for the free advisement thanks for your great videos
Thanks 👍
U should install a corn bin on the farm Jason.. have it filled once or twice a year. Back your need toy up under it and fill her up.. no back work at all! 😀
👍
We have a Crustbuster tender similar to this. Running the wire to end of seed tube, relocate or put a 2nd on/off switch to end of tube because when it's full it's going to move some seed. When it gets low tap on side of hopper with rubber mallet, mite help empty out. That works with fertilizer tender. That's going to be a nice set up anyway you do it.
👍👍
Once you add "your" modification's you'll be unstoppable..LOL Have a great day Brian & Jason..
Thanks 👍
When u load it full it will come out faster Jason so no worries there .and you can get a peace of pvc pipe with a 90 with a short peace of pipe for filling the troffs
👍
I believe your right when that hoppers full that baby gonna spit!!
👍
That feeder is going to be sweet it sure will be easier on your back to fill it with the loader on the tractor than the one bag at a time.
👍
Mahalo and Aloha from the Big Isle "🤙"
👍
That'll be nice around the farm and handy
👍
Is that what you got the ranger 1000 to pull that with
Not at first 👍
Awesome what you and Jason are doing...
Thanks 👍
That is very cool jason i like that toy
Thanks 👍
Good video that is going to be nice
Thanks 👍
add a flex tube on the end.
👍
Great video Jason
Thanks 👍
👍👍👍
👍