How to test Capacitor without Multimeter
Вставка
- Опубліковано 11 вер 2024
- In this video, I have shown how to test capacitor without using a multimeter. With this method, you can easily identify good or bad electrolytic capacitors.
It is very often the circuit stop working due to a bad capacitor. If you don't have a multimeter to test a capacitor then you can refer to this method. First, you have to check the top portion of an electrolytic capacitor. If you find the top position is flat then the capacitor is in good condition but if the top portion is inflated then you should replace the capacitor. Thus you can identify the good or bad capacitor.
Again this is not an accurate method to test capacitor but if you don't have any multimeter then you can follow this method for testing good or bad capacitor.
#Capacitor #TechStudyCell
If you have enjoyed the video please hit the like button and share it with your friends. For more such videos don't forget to SUBSCRIBE our channel and please do share your feedback in comment sections. Thank you for your Support.
Find us on Facebook: / techstudycell
Other useful tutorial videos for Capacitor:
How to Test Capacitors with and without Multi-meter.
• How to Test Capacitors...
Experiments with Electrolytic capacitors
• Experiments with Elect...
How to Check Motor Start and Motor Run Capacitors
• How to Test Motor Star...
How to read Ceramic Capacitor value from Capacitor code
• How to read Ceramic Ca...
How To Test All Electronic Components with Multimeter
• How To Test All Electr...
Great job. Simple and straight to the point. Exactly what I was looking for. Thank you kind sir.
Tq for info. Nice multimeter u have there.
Good but you should point out the need to connect neg multimeter probe to neg side of the capacitor,ref white line on the capacitors
Thank you for sharing useful information.
You are welcome...
Thankyou sir🥰🥰
Great information, thanks.did you set the meter to ohm to test?
Fiend thank you for a good job you are doing! Sometimes may be it possible being capacitor within a good capacitance value but it is damaged because of Ohm is low level in the capacitor. If it is possible, please explain us in which situations we can't say that a capacitor is damaged even though it shows what is written on it.
Most videos I have seen focus mainly on electrolytic capacitors where there are visual signs of a bad capacitor such as the bulge on the top and leaking as well as checking the capacitance and ESR measurements. I would like to know if there are any similar tests for the other types of capacitors such as the polyester, box and ceramic varieties. Does a good capacitance value alone indicate that these other types are good. Are there any tests to check if they are leaking current or any other issues that would cause them to be faulty. Just like how an electrolytic cap may show no visual signs but have a high ESR or low capacitance and be bad.
Nice explanation bro. Thanks a lot.
You are welcome
Good video man thanks
Glad you enjoyed it
"How to test Capacitor without Multimeter"... you're using a multimeter through almost all the video aren't you?
great info
Glad you think so!
Good job
Thanks
I have one question
That is,I chech the capacitor value but that capacitor show the changing value range uf to nf but not show value. This capacitor good or bad
What if the capacitor is physically hit from side, top part looks flat but side is hit inward a bit, does that effect the capacitor?
Yes it does
1:39 common error
Bro can u tell me that how many white bulbs of 3v should i glow with 2 Cells which has AA size plzz tell me brother ...u uploaded a video about small led bulbs from here i visit ur channel
Sir kiya 25v 1000uf capacitor ko DC 25.5v 15A power supply dy sakty hain….?????
Well explain... Thanks for sharing 👍
You are welcome..
Is it 100% necessary to remove capacitors from the circuit board in order to test them? Power is disconnect and drained from the board.
Yes
Did u do it without multimeter 🙄
Y did u just write "without multimeter"
Thank you for this video. it was helpful.
Glad it was helpful!
May I have the name and model of the multimeter you are using
Without multimeter?
They all look good to me but my monitor is still not displaying, some feel a BIT loose, tho.
👍👍👍
nice
Thanks
Why use multimeter?
How much your digital auto meter?
bro u only made that capacitor to bulge
...by applying more than rated voltage
isn't it obvious which one is bad? I need to know how to test it if it ISN'T obvious by observation ...quite useless video tbh
Test it with multimeter.
I know what you're saying.
@traianivanescu24
0 seconds ago
No, it wasn't a useless video. I didn't know about the difference until he pointed it out.
Aha, so the method for testing capacitors without a multimeter is using a multimeter?
no, he's just using the multimeter to confirm the theory "bloated = bad" to prove that it is a reliable method.
Mine is a 470 uf it's not bulging but it reads 500 is it faulty
No it's good. They have some tolerance, usually +-5%
"Without a multimeter"?
That's good but I want video in hindi so start video in hindi for Increase your subscribers
Bed
Indian never knows how to say capacitor
Vi hindi main kaho