Nếu bạn thấy thú vị, thích, đăng ký và nhận xét về câu hỏi ý tưởng của bạn, kênh sẽ hỗ trợ và tạo ra các video tuyệt vời cho bạn! Chế siêu thuyền sử dụng động cơ Ô Tô phế liệu | Building scrap engine yachts 1600cc ua-cam.com/video/JwY2YkW-mG4/v-deo.html
I really enjoyed the fabrication done by this young man. Reminded me of growing up on the farm. First big tool I learned how to use was a stick welder and grinder. Built a 3 wheeler out of junk I picked up at the local junk yard. My 7yr old nephew had a blast on it for years. We used parts from a honda 90 and a bike and an old balloon tire trike.
@@ГеннадийВишневецкий у него водяная рубашка и 6квт - это в бусте. В реальном использовании средняя мощьность ниже, а скорость ограничена напряжением (мотор на что-то там рассчитан, шаг винта фиксирован). На самом деле не мало потерь есть в редукторе и кардане. Но при перемещении не против сильного ветра пойдет.
That thing looked really stable in the water! It took off like a...spaceship! I really enjoyed watching you build it and you are clearly very smart at designing and building water-based vessels. Looks like a lot of fun!
This guy can build a speed boat with scrap, while NASA can't go back to the moon with all the billions and trillions of money they spend... Something is fishy in there...
🔥⚡️🔥 *Very impressive build and result!* I love the choice of water cooled electric motor with planetary gearing, custom lathe work and practicality of the bike frame/seat. The rider balance is perfect as well. Incredibly good work on the foam, fiberglassing and wing additions. This is a phenomenal diy and something to be proud of. I personally hope you progress this idea into something more and even a business. _Keep up the great work!_
Just love your planetary gearbox to high speed motor set up ! You seem to have a good match to your propeller . I think your power to weight ratio could get you up on hydrofoils. You are very clever and i think you could come up with something awesome ! keep up the good work.
@@teabagmcpick889 hahahaha yeah well i guess in some countries they are still behind conserning safety regulations. here in the netherlands you can not even get a job in construction if you dont have the basic safety certificate (called the VCA over here, that tell everything you need about personal protection equipments etc)
tho i must say i have worked with men that were vetarans in construction and among them also guys that grind whole blocks of stone without ear-caps or glasses either.... that like the most stupid thing to do because only the sound of that already hurts your ears, let alone you can feel the pieces of stone flying against your face
Плюсы видны. Скажу о минусах: 1. Обычный пенопласт, даже под стекловолокном с эпоксидкой, сильно впитывает воду и быстро разбухает. Это изделие будет недолговечным. Альтернатива - экструдированный пенополистирол. 2. Этот "кораблик" можно использовать только по гладкой воде. Малейшее волнение чревато большими неприятностями.
Belo feito! Parabéns pela criatividade, e pela capacidade de usar materiais facilmente acessíveis a todos! É um grande incentivo à fazer algo parecido.
It's not everyday that you'll see someone with a personal metal lathe in their home in Vietnam. Imagine what he can build if he has access to higher end tools!
Exactly, I'm in Croatia and I'm looking for a good lathe to buy. You need space and first of all electricity. This smells not total amateur but the glass fiber job was horrible, and you dont weld like that. Also need a table because of future health problems, knees, back everything. Also this is quite dangerous floater, a wave and your "boat" cracks and the cracks cut your lims. Really? Safety? Not? Lol.
i doubt that he has a lath of his own. look at where and how he propped up his canoe. probably get them done at a local machining shop. this guy ia good 👍.
@@martinavrdoljak6030 this guy is not at all well finan ed for what he is doing. Safety is not something he can afford, sadly. He does what he can. Maybe someday he catch attentions from a well heeled enthusiast or a company interested in his hobby?
вы мыслите критериями ДВСника. электромотор не вибрирует, его не трясёт. я плавал на электро лодке. если вал и винт сбалансированы, то вибрация отсутствует как таковая. вообще. полностью. сорри за некропостинг.
Remarkable! Of course it might not do well in waves but for that flat water it's perfect! The guy who built is a mechanical genius. Congratulations, man!Just went to the channel and saw he has done MANY related boats, each one different. Fantastic!
Another awesome build, use a 10 to 20mm pipe facing forward under boat to scoop up water as your moving to cool esc, motor , definitely a saving on a water pump power. Cheers
Beautifully done. I've owned a boat for fifty of my 78 years. I once owned a Styrofoam sail boat. It was just a "play thing" for use on the nearby lake - fun. Worked well and I often thought about putting fiberglass on it but never got to it. In this case I would shield the pipe, prop and rudder and protect any point where water could get into the electronics. Small gets bigger so I would figure out how to make the wings removable and add more depth. I don't think that would be difficult to do. Not sure how long it runs but the longer the better. I could see these being used competitively on the lake by people everywhere. One becomes many and it doesn't take long for the enhancements to come. Next question, how can I use it to fish out of and troll with? I would have to be able to change the gear ratio of the prop as needed.... Thanks. Nice job!!!!!
@@turdferguson1021 Nobody asked you for your pointless waste of energy comment either….but here you are, thinking you’re funny as well no doubt! Embarrassing really!
Bạn thật thông minh và bạn có quyền ước mơ công nghiệp hóa nó! Để mỗi người dân có thể sở hữu nó trong công tác của mình để phục vụ các công việc sông biển! Việt Nam cảm ơn bạn!
6 kW = about 10 hp. Obviously a brushless model plane or quad type motor and lithium ion battery. That is why human carrying quads are actually possible.
I'm very impressed by the way you built this one of a kind boat using basic tools. I especially like the way you used your welder as a way to carve the foam. Very smart guy. The bike frame was perfect for the build.🤙🤙. The performance was was awesome. Have you ever thought of using hydrofoil technology on one of your boats? That would be awesome to see you build. You are very smart and dedicated to your craftsmanship. Keep up the great work that you are doing. Love watching your videos 🤙🤙
Is that really a 6kW motor? With a 12v battery? Current would be 500amps?? With a 100 AH battery it would run for a mere 12 minutes at best. I built an electric car using a 12v battery but the motor was much bigger than shown here and it was only 1/3 hp drawing approx 30 amps. I would love to know where this guy got his motor! Were the drive shaft bushes rubber? Maybe graphite filled ptfe. Well done and bravo young man and your dad.
Về mặt thẩm mỹ rất đẹp! Còn chỗ trục động cơ bạn căn chỉnh tí cho đồng tâm chứ hơi rung quá, với lại mấy chỗ dùng dây thít thì khéo chuyển sang dây inox hoặc kẹp cho đẹp với bền hơn :)
It's not everyday that you'll see someone with a personal Robot Helper Monkey in their home in Vietnam. Imagine what he can build if he has access to higher end Robot Helper Monkey! I love the choice of water cooled electric Robot Helper Monkey with planetary paws, custom tail work and practicality of the Automaton Primate Assistance. The Robot Monkey Butler's balance is perfect as well. Incredibly good work on the electric bananas. This is a phenomenal diy and something to be proud of. I personally hope you progress this idea into something more and even a business. Keep up the great work!
Do you mind explaining the circuitry so we could build this as well? Seems to run smoothly. What all the gadgets on the handlebars. I think I recognize a potentiometer, I see a lot of capacitors. What are they doing increasing voltage to your motor? What's the motor size and voltage capabilities? So many questions I'm sry but I don't see any description. Thanks for your awesome upload 😀
Great job! That thing looks so fun to ride. I do wonder if anyone has an idea about why he chose to put those "wings" on his craft (4:00). I can see that they certainly provide extra stability but it seems like on a sharp turn they'd do just the opposite-dig into the water and send the craft spinning and capsizing. I don't think they would do this if they were attached in the opposite direction (pointed parts pointing towards the back). I didn't really see any sharp turns made in the video so I don't know if my assumptions are correct. I know 0️⃣ about boat design but if anyone has any ideas, I'd love to hear them.
If anything, those wings are providing negative force (pushing the craft down) because that design is going to have the craft want to lift out of the water. He could probably add some hydrofoils and that thing would really scream across the water.
Muito top queria muito um pra mim aqui no Brasil já imaginei até adaptar um compartimento pra colocar alguns peixes 🐟 um sonho ter um desse, parabéns pela criação 👏🏻👏🏻
If the boat could be stored upright on the back of a US truck or car with 2 wheel carrier it could create a new market niche as Honda did with their early Scooters. Very nice!
You do know that a full size inboard power boat (even the higher power boats in a lot of race events) don't use bearings on the prop shaft, what they do use is an oil lite bronze composition bushing that uses the surrounding water it's buried in and runs consistently in fully submerged conditions.
Meus Parabéns Jovem ! vc fez num veículo prático e leve e fácil de Pilotar, obs : leve contigo Bateria de reserva, pra vc não ficar na mão sem energia ok? placa solar tb ajudaria... Belo PROGETO . SUCURY PANTANAL CUIABÁ MT BRASIL.
The imagination is key to human advancement. Science is suppose to be the tool that chases the imagination. Instead it has been made into a web of confinement. Great job man, keep it up!
Nếu bạn thấy thú vị, thích, đăng ký và nhận xét về câu hỏi ý tưởng của bạn, kênh sẽ hỗ trợ và tạo ra các video tuyệt vời cho bạn!
Chế siêu thuyền sử dụng động cơ Ô Tô phế liệu | Building scrap engine yachts 1600cc
ua-cam.com/video/JwY2YkW-mG4/v-deo.html
Thuyền này có bán ko anh
tuyệt quá!😱
WOW!!
Great design brother . Would make a perfect fishing boat
Qual a duração da bateria ?
I really enjoyed the fabrication done by this young man.
Reminded me of growing up on the farm. First big tool I learned how to use was a stick welder and grinder.
Built a 3 wheeler out of junk I picked up at the local junk yard.
My 7yr old nephew had a blast on it for years.
We used parts from a honda 90 and a bike and an old balloon tire trike.
sounds like you wasted a honda c90 and a old balloon tire trike
@@bittasweetsymphony726 -- sounds like you're a sour old troll
Не знаю, как это видео оказалось среди моих рекомендаций, но это потрясающе! Парень - молодец!👍
полностью согласен
Поддерживаю! Только сомнения по поводу мощности.Может 600 ВТ
@@ГеннадийВишневецкий у него водяная рубашка и 6квт - это в бусте. В реальном использовании средняя мощьность ниже, а скорость ограничена напряжением (мотор на что-то там рассчитан, шаг винта фиксирован). На самом деле не мало потерь есть в редукторе и кардане. Но при перемещении не против сильного ветра пойдет.
@@101picofarad Да видно,что для такого аппарата хватает.
malinaw sakin ang lahat mAliban sa hindi kapani paniwalang mag welding sa foam para i dikit ang bakal.😅
That thing looked really stable in the water! It took off like a...spaceship! I really enjoyed watching you build it and you are clearly very smart at designing and building water-based vessels. Looks like a lot of fun!
This guy can build a speed boat with scrap, while NASA can't go back to the moon with all the billions and trillions of money they spend... Something is fishy in there...
Inspires us for such stuff
Why arent the governments adopting these types of minds to better the future of the human race
You mean flat water, no waves, no current, no wind. Rare conditions.
@@q_rkmghow7083 yes those things are totally the same if you have no common sense.
🔥⚡️🔥
*Very impressive build and result!* I love the choice of water cooled electric motor with planetary gearing, custom lathe work and practicality of the bike frame/seat. The rider balance is perfect as well. Incredibly good work on the foam, fiberglassing and wing additions. This is a phenomenal diy and something to be proud of. I personally hope you progress this idea into something more and even a business. _Keep up the great work!_
And to my untrained eyes, he seems to look like he knows a lot of tips and tricks in doing what he's doing...👌
Didn't he locked the gearing and made it direct drive?
Thank you very much, I will learn from you and do better!
If someone hasnt already picked up the young man for his talent...he will be...Excellent work and creativity.
@Jesus is coming. Read the Gospel. Delusion. The definition is - believing things which are not true.
👍👍CẢM ƠN ANH ĐÃ LÀM VIDEO HAY VÀ BỔ ÍCH💝💝💖💖💗💗💕💕
Awesome engineering, I love how truly minimalist this craft is, way to go, sir!
That tiny wake left behind it shows it is very efficient and low drag.
Nice build.
Where did u get the motor from and whats it normally used for....and capicotors
Thank you very much, I will learn from you and do better!
Great job! Thanks for ideas!
Just love your planetary gearbox to high speed motor set up ! You seem to have a good match to your propeller . I think your power to weight ratio could get you up on hydrofoils. You are very clever and i think you could come up with something awesome ! keep up the good work.
ive seen a bunch of videos of guys like these building watercrafts on hydrofoil also
@@jeroekoe & did they weld without eye protection as well?
It doesn't seem like there would be much to gain from foils. He's pretty close to operating on a foil when he's on plane as it is.
@@teabagmcpick889 hahahaha yeah well i guess in some countries they are still behind conserning safety regulations. here in the netherlands you can not even get a job in construction if you dont have the basic safety certificate (called the VCA over here, that tell everything you need about personal protection equipments etc)
tho i must say i have worked with men that were vetarans in construction and among them also guys that grind whole blocks of stone without ear-caps or glasses either.... that like the most stupid thing to do because only the sound of that already hurts your ears, let alone you can feel the pieces of stone flying against your face
Отличный пеноэлектровелокосмолёт 👍
Such beauty, such seed, so much fun! Just a tiny motor, small battery! What a brilliant construction.❤
Thank you so much! ❤️
Плюсы видны.
Скажу о минусах:
1. Обычный пенопласт, даже под стекловолокном с эпоксидкой, сильно впитывает воду и быстро разбухает. Это изделие будет недолговечным. Альтернатива - экструдированный пенополистирол.
2. Этот "кораблик" можно использовать только по гладкой воде. Малейшее волнение чревато большими неприятностями.
Ждём видео от тебя
От таких рацух, слепленных из гавно мусора, в океане уже целые острова плавают, а что до экологии азиатам, до пизды
Tưởng nước ngoài ko á, ai dè VN, giỏi quá các anh trai thợ thầy VN ơi, đưa kĩ nghệ nước nhà sánh với cường quốc 5 châu ♥️♥️♥️
Cảm ơn bạn rất nhiều nha, mong bạn luôn ủng hộ!
Đẹp xuất sắc
Belo feito! Parabéns pela criatividade, e pela capacidade de usar materiais facilmente acessíveis a todos! É um grande incentivo à fazer algo parecido.
Verdade
Muito obrigado, espero que você sempre me apoie!
It's not everyday that you'll see someone with a personal metal lathe in their home in Vietnam. Imagine what he can build if he has access to higher end tools!
Exactly, I'm in Croatia and I'm looking for a good lathe to buy. You need space and first of all electricity. This smells not total amateur but the glass fiber job was horrible, and you dont weld like that. Also need a table because of future health problems, knees, back everything. Also this is quite dangerous floater, a wave and your "boat" cracks and the cracks cut your lims. Really? Safety? Not? Lol.
i doubt that he has a lath of his own. look at where and how he propped up his canoe. probably get them done at a local machining shop.
this guy ia good 👍.
@@nokia5359 I agree 👍💯
@@martinavrdoljak6030 this guy is not at all well finan ed for what he is doing. Safety is not something he can afford, sadly. He does what he can.
Maybe someday he catch attentions from a well heeled enthusiast or a company interested in his hobby?
@@martinavrdoljak6030 it's Asia, safety is a foreign concept there.
Magic tiny wake , no power being wasted there. Love to know it’s run time and battery. Well done
👍👍👍💯 Крутая лодка! Только одно нужно добавить в конструкцию - мотор с редуктором на демпферы поставить, чтоб на всю конструкцию исключить вибрацию!
вы мыслите критериями ДВСника. электромотор не вибрирует, его не трясёт. я плавал на электро лодке. если вал и винт сбалансированы, то вибрация отсутствует как таковая. вообще. полностью. сорри за некропостинг.
Simplesmente espetacular. Parabéns pelo projeto. Super inteligente este desenvolvimento. Prático e muito perfeito.
Thank you very much, I will learn from you and do better!
@@Nasatchannel Hello! How powerful is the battery and how long does it last?
A real genius and engineer!
Chiếc tàu có một thiết kế với màu sắc rất đẹp và chất lượng, mình mong muốn có được một chiếc và lái nó như bạn.
Remarkable!
Of course it might not do well in waves but for that flat water it's perfect! The guy who built is a mechanical genius. Congratulations, man!Just went to the channel and saw he has done MANY related boats, each one different. Fantastic!
Projeto louco .bem desenvolvido.bem construído com baixo custo parabéns o mundo precisa de mais idéias assim
O cara é foda!
Офигеть! Парень, это лучшее видео, которое я сегодня посмотрел! Очень вдохновляюще! Успехов тебе во всех твоих начинаниях!
Твои руки из золота! С любовью из России.
Человек делает,а дух творит,всем добра и крепкого здоровья люди!☝️❤️🤝👌
Another awesome build, use a 10 to 20mm pipe facing forward under boat to scoop up water as your moving to cool esc, motor , definitely a saving on a water pump power.
Cheers
Thank you very much, I will learn from you and do better!
hôm nào làm chiếc du thuyền mini có phòng nghỉ luôn bạn
Xong phải đk phương tiện nha bác,nếu không chỉ loanh quanh trong hồ nhà thôi 😂
I’d have to spend a month under your tutelage to grasp the entire process and to actually feel comfortable doing this on my own. You’re brilliant.
Молодцы!!!
Даже охлажбение редуктора продумали👍👍👍
вот и импортозамещение!
Приветствую. Не подскажешь что это у него за мотор стоит?
@@pretty270 привет, не узнал что за мотор?
Beautifully done. I've owned a boat for fifty of my 78 years. I once owned a Styrofoam sail boat. It was just a "play thing" for use on the nearby lake - fun. Worked well and I often thought about putting fiberglass on it but never got to it. In this case I would shield the pipe, prop and rudder and protect any point where water could get into the electronics. Small gets bigger so I would figure out how to make the wings removable and add more depth. I don't think that would be difficult to do. Not sure how long it runs but the longer the better. I could see these being used competitively on the lake by people everywhere. One becomes many and it doesn't take long for the enhancements to come. Next question, how can I use it to fish out of and troll with? I would have to be able to change the gear ratio of the prop as needed.... Thanks. Nice job!!!!!
Nobody asked....
@@turdferguson1021 - your response is like your name.
@@turdferguson1021 Nobody asked NASAT Channel to post the video either, but here we are. That's how the world works.
@@turdferguson1021 Oh yeah? and nobody asked if anybody asked. Bitch
@@turdferguson1021 Nobody asked you for your pointless waste of energy comment either….but here you are, thinking you’re funny as well no doubt! Embarrassing really!
Bạn thật thông minh và bạn có quyền ước mơ công nghiệp hóa nó! Để mỗi người dân có thể sở hữu nó trong công tác của mình để phục vụ các công việc sông biển! Việt Nam cảm ơn bạn!
Tôi đồng ý với bạn về điều đó.
hard to believe this small motor is so strong !
6 kW = about 10 hp. Obviously a brushless model plane or quad type motor and lithium ion battery. That is why human carrying quads are actually possible.
It's great! Keep up the good work!👍
Из России привет. ты красавчик!!! )))
Show de habilidade na execução dedicação 🙏
Muito obrigado, espero que você sempre me apoie!
Perfeito, maravilhoso, adorei imagina andar nisso aí, que relaxante, e divertido deve de ser!
Muito obrigado, espero que você sempre me apoie!
@@Nasatchannel Sempre vou apoiar ideias realmente criativas, parabéns, amei, se pudesse mandava fazer pra mim kk
Tôi thích video của bạn rất nhiều. bạn là một thiên tài .
Belo trabalho, ficou lindo, parabéns. Um abraço prá vcs direto de SÃO PAULO, BRASIL. 🇧🇷👍🇧🇷👍🇧🇷👍🇧🇷👍🇧🇷
I'm very impressed by the way you built this one of a kind boat using basic tools. I especially like the way you used your welder as a way to carve the foam. Very smart guy. The bike frame was perfect for the build.🤙🤙. The performance was was awesome. Have you ever thought of using hydrofoil technology on one of your boats? That would be awesome to see you build. You are very smart and dedicated to your craftsmanship. Keep up the great work that you are doing. Love watching your videos 🤙🤙
A lathe is not a basic tool just saying
That boat is hydrofoil.
Is that really a 6kW motor? With a 12v battery? Current would be 500amps?? With a 100 AH battery it would run for a mere 12 minutes at best. I built an electric car using a 12v battery but the motor was much bigger than shown here and it was only 1/3 hp drawing approx 30 amps. I would love to know where this guy got his motor! Were the drive shaft bushes rubber? Maybe graphite filled ptfe. Well done and bravo young man and your dad.
Looks like fun. Reminds me of when I used to build R/C model boats as a teenager.
EXEMPLO DE UM SONHO QUE COM ERROS E ACERTOS... FOI CONCLUIDO COM SUCESSO!!!
Muito obrigado, espero que você sempre me apoie!
Anh làm ván lướt sóng chạy điện đi anh. Nhiều người sẽ thích coi lắm. Jet electric surfboard đó anh.
can you link all electronic parts and what reduction did you use?
Nice build. Pretty awesome seeing this on calm waters but now I want to see how it fair on ocean or sea with such waves.
That hull is not designed for waves. Water would flood the engine bay and/or flip the vessel.
Very nice little boat.
Thank you so much!
Amazing build and equally amazing that the motor is capable of a more than reasonable performance.
Parabéns pelo projeto meu amigo vc mostrou que a perseverança é muito importante na vida das pessoas
Klasse, du bist Genie! 👍
Gratuluję pomysłowości i sprytu w wykonaniu takie fajnego ślizgacza :-) Brawo
Về mặt thẩm mỹ rất đẹp! Còn chỗ trục động cơ bạn căn chỉnh tí cho đồng tâm chứ hơi rung quá, với lại mấy chỗ dùng dây thít thì khéo chuyển sang dây inox hoặc kẹp cho đẹp với bền hơn :)
O cara é simplesmente fantástico!...
Muy buen trabajo , ha quedado estupendo , es increíble la potencia de ese motor para el tamaño que tiene. Un saludo
Very very good job. Moving very nice and stable also. +++
It's not everyday that you'll see someone with a personal Robot Helper Monkey in their home in Vietnam. Imagine what he can build if he has access to higher end Robot Helper Monkey! I love the choice of water cooled electric Robot Helper Monkey with planetary paws, custom tail work and practicality of the Automaton Primate Assistance. The Robot Monkey Butler's balance is perfect as well. Incredibly good work on the electric bananas. This is a phenomenal diy and something to be proud of. I personally hope you progress this idea into something more and even a business. Keep up the great work!
This fella knows how to make an excellent How To video without talking, and he is quite the craftsman.
Muito bom, genial!!!
Parabéns!
😊vraiment génial ❤ comme idée 😊😊
Parabéns 👏🏻👏🏻👏🏻 vou fazer um pra mim também 🇧🇷🇧🇷
Muito obrigado, espero que você sempre me apoie!
Parabens, pelo projeto bem executado, ficou show de bola!!!
Muito obrigado, espero que você sempre me apoie!
Do you mind explaining the circuitry so we could build this as well? Seems to run smoothly. What all the gadgets on the handlebars. I think I recognize a potentiometer, I see a lot of capacitors. What are they doing increasing voltage to your motor? What's the motor size and voltage capabilities? So many questions I'm sry but I don't see any description. Thanks for your awesome upload 😀
Its from rc
Parabéns belíssimo trabalho
You’re a true champion of the world. Respect 👊🏼
SHOW!... PENA QUE NÃO TEM NAS LOJAS PARA VENDER.👋👋👋
Apparently not. But hey, he made his own even better at half the cost.
@@timothyblackburn6801 ELE PODERIA SIM CAPITALIZAR ISSO...NADA IMPEDE QUE ELE VENDA PELO DOBRO DO PREÇO POIS EH MERITO DELE!!!
Great job! That thing looks so fun to ride.
I do wonder if anyone has an idea about why he chose to put those "wings" on his craft (4:00). I can see that they certainly provide extra stability but it seems like on a sharp turn they'd do just the opposite-dig into the water and send the craft spinning and capsizing. I don't think they would do this if they were attached in the opposite direction (pointed parts pointing towards the back).
I didn't really see any sharp turns made in the video so I don't know if my assumptions are correct.
I know 0️⃣ about boat design but if anyone has any ideas, I'd love to hear them.
If anything, those wings are providing negative force (pushing the craft down) because that design is going to have the craft want to lift out of the water. He could probably add some hydrofoils and that thing would really scream across the water.
Fascinating to watch. WOW!!!!!!!!! You'd be a Millionaire in the US because you understand how to build. Amazing...
Парень крут!наверно местная звезда)))главное чтоб батарейка не взорвалась под жопой
🤣🤣🤣👍
))))))))))))))
How long will the motor run on a single charge? And what kind (size) of battery is used? Genius! Thank you for the video! Well done. 👍🏼🙏🏻
Thank you so much! ❤️❤️
Muito top mano. Parabens
Muito top queria muito um pra mim aqui no Brasil já imaginei até adaptar um compartimento pra colocar alguns peixes 🐟 um sonho ter um desse, parabéns pela criação 👏🏻👏🏻
Boa idea, Elton, a função pesca seria um bom upgrade. Abração!
@@marciodoo top demais sua criação estou ansioso pra ver outras... grande abraço
If the boat could be stored upright on the back of a US truck or car with 2 wheel carrier it could create a new market niche as Honda did with their early Scooters. Very nice!
Parabéns, muito legal seu projeto!
Muito obrigado, espero que você sempre me apoie!
It really bothers me that there are no bearings on the prop shaft. I would have put some on each end of the rudder shaft too.
What are you? OSHA? Who cares. This guy is a mad scientist given his limited resources, and make it happen attitude.
Why didn't you make it 😂😂😂😂😂
@@WillPower46 Yeah no kidding. Where's is your vessel, made from scratch?
Really bothers you haha
You do know that a full size inboard power boat (even the higher power boats in a lot of race events) don't use bearings on the prop shaft, what they do use is an oil lite bronze composition bushing that uses the surrounding water it's buried in and runs consistently in fully submerged conditions.
I enjoyed everything about this video. Great project, thanks for sharing!!
Thank you so much! ❤️❤️
Parabéns o projeto é ótimo
Muito bom! Gostei da sua embarcação. Parabéns pelo projeto.
Muito obrigado, espero que você sempre me apoie!
Умница и трудяга .молодец!!!!!
Que show de engenharia. Simples e funcional. Parabéns ❗️🇧🇷
Bardzo fajny projekt :)
That is so amazingly cool ... thanks for sharing 😀
Thank you so much!
Meus Parabéns Jovem !
vc fez num veículo prático e leve e fácil de
Pilotar, obs : leve contigo
Bateria de reserva, pra vc
não ficar na mão sem energia ok? placa solar tb ajudaria...
Belo PROGETO .
SUCURY PANTANAL
CUIABÁ MT BRASIL.
Top demais, parabéns pelo seu ótimo projeto !!!!
Impressed! Congrats on your achievement! Very nice! Thank you for sharing!
Muito maneiro queria fazer um também
Mete a cara então. Q falta?? depois ja mostra por aqui tambem
😉👍🏼
Simplesmente incrível!!!
Ironic, if a hadn´t a computer to watch videos like this, i would do this by myself.
Muito bom mesmo 👏 gostei muito
Boa noite, gostei muito do seu vídeo, será que vc poderia colocar as especificações e o tipo de motor que vc está usando por favor...
You're a very resourceful, creative and knowledgeable builder. That thing moves pretty good!
Projeto fantástico. Coloquem informações de velocidade máxima, autonomia média em km, peso suportado, peso total da estrutura. Obrigado
That is sooo cool!! My friend 😎 👍
Thank you so much!
With such amazing talent to see your vision become real built with your two hands and it works beautifully , you should of been smiling more 😉👍
Excellent build for some fun and what great water ways be careful of flipping up your front with a head wind though.,
WOW sweet build 👍👍👍👍👍😎 . SKK .
Все гениальное -просто !Шикарный ролик ! Вы супер -инженер !
cảm ơn anh trai ... Bình an ✌️🤠✌️
The imagination is key to human advancement.
Science is suppose to be the tool that chases the imagination.
Instead it has been made into a web of confinement.
Great job man, keep it up!
As grandes empresas estão em falta de profissionais como este cara. #Yamaha #Seadoo #Tesla
❤️❤️
The simplicity and efficiency of an electric veichle is something marvelous...Do your part to make it become our tomorrow!