Can you program this ESC? I saw on the AliExpress listing that the seller mentioned "ESC is set in the middle of the range, the new control generally need to fine tune the throttle."
Hello, one question, what happens when we use 3.7V battery instead of minimum 4V requirements? Does the BEC voltage will be 3.7V or does BEC voltage will be lower than the battery?
Good question 🙂. Maybe we need to try it giving a supply with 3.7v and measure the bec using volt meter. But I think the esc will not work, all esc have low voltage protection and it will shutdown.
I think it can. I tried a 775 motor on my college days hehrhehe! Drive it 10v to 24v to a 20A motor speed controller. But still depends on the application. Are you using it for RC? EsC with 60A above would be better.
You got your male and female the wrong way around. How does this not surprise me in this present political climate! Depends if your referring to the pins or the plastic part of the connector in normality a battery has a female plug to protect it from shorting but somehow they made things confusing by making a female part have a type of male fitting by making a female part go inside of a male part. Stupid system!
Thank you so much!
Informative clip again! Next pls Calibrating 370/180 motor pinior gears!
Thanks bro
Thanks for your sharing this. Now i can use too
You are welcome bro. Thank you also...
Hi nice video, can you turn of the noice it makes
can you tell me more about the reciever? please
thanks brother for awesome information
I just wanted to know how much volt ESC needs thanks ♥️
7.4v bro
i have the same esc but it's blinking red.the steering works but the car won't move. any solutions?
Try switch on the forward/reverse/brake mode. If it's still not working I guess your esc is defective
Can you program this ESC? I saw on the AliExpress listing that the seller mentioned "ESC is set in the middle of the range, the new control generally need to fine tune the throttle."
No bro this is not programmable
how do i connect to a motor on an rc plane to make it one direction only please?
Hello, one question, what happens when we use 3.7V battery instead of minimum 4V requirements? Does the BEC voltage will be 3.7V or does BEC voltage will be lower than the battery?
Good question 🙂. Maybe we need to try it giving a supply with 3.7v and measure the bec using volt meter. But I think the esc will not work, all esc have low voltage protection and it will shutdown.
@@morrisrc I've tried it. BEC gives out 2.2V on first test and 1.7V on the second test. The ESC and BEC still works fine, right?
Can I run 390 dc motor?
I find one that is the exact same esc but it is for a winch. Can i use it like a normal esc?
Yes bro. I also use that in the winch but with lower current, 20A.
Whitch motor do you use? Does this esc Works with 370 bd motor?
Yes, 370 motor
Nice
Does it have battery cut off?
Yes bro low voltage protection
Bro we can use 775 motor with 30a esc
I think it can. I tried a 775 motor on my college days hehrhehe! Drive it 10v to 24v to a 20A motor speed controller. But still depends on the application.
Are you using it for RC? EsC with 60A above would be better.
@@morrisrc bro but my budget is low
Just try it. From where are you?
India
Please give me best esc to run 775 motor under 1000rs
do you know why my esc cant reverse im using flysky fs i6
Did you try the forward brake reverse switch?
hey..what chasis is this bro? wpl C24-1?
B series chasis from b16. I used this frame for my Toyota Hilux Revo body shell.
Thanks, guess mine just never worked
Does the light indicator lit? And have you tried also the forward/brake/reverse switch?
@@morrisrc nothing, tried it all :( I even took apart the on and off switch to have it permanently on in case that was a problem
hello, I am using a 20 amp esc, pixhawk cube is not calibrated, can you help me?
Yeah this type of esc is not programmeable.
What is the problem with your 20a esc?
@@morrisrc Pixhawk cube not calibrating
Tq for information
Thabk you also sir
You got your male and female the wrong way around. How does this not surprise me in this present political climate! Depends if your referring to the pins or the plastic part of the connector in normality a battery has a female plug to protect it from shorting but somehow they made things confusing by making a female part have a type of male fitting by making a female part go inside of a male part. Stupid system!