Easy Fix for Common Problem -Tiguan Turbocharger - PO299 Low Boost Condition

Поділитися
Вставка
  • Опубліковано 18 жов 2024

КОМЕНТАРІ • 39

  • @jsundevil1
    @jsundevil1 2 роки тому +3

    Hey, Mass! I miss the tappet bros. Click n clack. You got the voice!

  • @overlandingtundrak9833
    @overlandingtundrak9833 2 роки тому +4

    Thanks for the info. I will see what happens when I get under there and look around but at least I have a better idea where to look.

  • @kertjackson4111
    @kertjackson4111 4 роки тому +8

    Yup seems to be a big problem I've got a 2016 Tiguan 60k miles it was frozen solid! Thanks for the video!

    • @amcrae1
      @amcrae1  4 роки тому +1

      Thank you! I got this repair workaround from a guy in the business!

    • @air_ruiz23
      @air_ruiz23 3 роки тому

      I just replaced the diverter valve but haven't released the potential frozen lever. Would you recommend anything else if this doesn't get rid of the code? Mechanic is my last resort.

    • @josehuerta16grapix
      @josehuerta16grapix 2 роки тому

      What happens when it freezes? I just checked on my car, and it threw that code. My car won't start now. Will that be the problem?

    • @tedjohnson64
      @tedjohnson64 3 місяці тому

      Nice video! This video was made 3 years ago, did you have to repeat the fix? Or was freeing up that arm only required once?

  • @mark.r8900
    @mark.r8900 Рік тому +1

    Hi, my wastegate is shut closed tight. The actuator is not holding pressure causing the wastegate flapper to be stucked closed. But I don't know why I am getting a P0299 underboost code. If wastegate is stucked closed shouldn't i be having overboost ? The car runs but has no power slow acceleration. Any help would be greatly appreciated. Thanks

  • @W.Khairi
    @W.Khairi 8 місяців тому +1

    Thank you

    • @amcrae1
      @amcrae1  8 місяців тому +1

      You're welcome.... this "fix" is still working to keep the engine light off in this particular car!

  • @Noel127
    @Noel127 3 роки тому +3

    bad or faulty boost solenoid will not make enough vacuum to actuate the arm, this is a temporary releasing of the frozen arm, it'll happen again.

    • @amcrae1
      @amcrae1  Рік тому

      and often the pivot on the flap just begins sticking...

  • @henryflores2360
    @henryflores2360 11 місяців тому

    Very good info

  • @GruntHarley
    @GruntHarley 3 роки тому +2

    I got a 2013 Tiguan which was leaking oil on the passenger side. Mechanic says its the turbo and I need to replace it. Now this turbo was already replaced back 2 years ago under warranty. Would your your issue cause oil like with that lever. I have no codes.

    • @amcrae1
      @amcrae1  3 роки тому +1

      I don't think it could be the cause of an oil issue, but I'll check with my expert vw friend for you!

    • @amcrae1
      @amcrae1  3 роки тому +3

      Update for you... there are two possible sources of oil coming from your turbo. The first is the connection to the oil feed that actually lubricates the turbo. The second is the connection at the intercooler where oil-carrying engine air can collect and possibly leak out.

    • @amcrae1
      @amcrae1  3 роки тому +3

      and youre welcome!

    • @GruntHarley
      @GruntHarley 3 роки тому +3

      @@amcrae1 Thanks Alan just saw your replies. I checked the connection at the intercooler and its dry. I found the oil return line leaking through a hole, replaced that still got oil from the turbo. Was told internal seals could be bad. I got a new turbo manifold will replace that and check that oil feed connection first. Thank you.

  • @agnosticevolutionist3567
    @agnosticevolutionist3567 7 місяців тому +1

    Check the egr for leaks too this can cause an under boosting

    • @wernerseliteauto
      @wernerseliteauto 4 місяці тому

      The 2.0t does not have EGR. Only the tdi does.

  • @lequ1152
    @lequ1152 Рік тому +2

    On my 2007 Passat P0299 was actually caused by a misfire because of a bad coil pack

    • @amcrae1
      @amcrae1  Рік тому +2

      Thanks for your comment! Good to know!!!!

    • @mark.r8900
      @mark.r8900 Рік тому +1

      Hi, did your misfire gave an engine code? Thanks

    • @amcrae1
      @amcrae1  Рік тому +1

      yes PO 299
      @@mark.r8900

    • @mark.r8900
      @mark.r8900 Рік тому

      Sorry I meant did you get a code for the misfire. Like a p0300, p0301, p0302...

    • @amcrae1
      @amcrae1  Рік тому

      @@mark.r8900 Hi! I don't think so!!!

  • @roseshayer4608
    @roseshayer4608 4 місяці тому

    Is an 09 similar?

  • @22chachalaca
    @22chachalaca 3 роки тому +1

    How long did this fix last for??

    • @amcrae1
      @amcrae1  3 роки тому

      It should be good for several months at least.

    • @22chachalaca
      @22chachalaca 3 роки тому +1

      @@amcrae1 better than a brand new turbo i guess

    • @Noel127
      @Noel127 3 роки тому

      replace your boost solenoid.

    • @amcrae1
      @amcrae1  Рік тому +5

      It's still working today!!!!!!

    • @22chachalaca
      @22chachalaca Рік тому +1

      @@amcrae1 thanks for the quick reply

  • @tubamike
    @tubamike 4 роки тому

    I have a 2017 wolfsburg tiguan. Hope this doesnt happen to me! Have you done the walnut blasting yet?

    • @amcrae1
      @amcrae1  3 роки тому

      What do people sandblast with walnuts?

    • @tubamike
      @tubamike 3 роки тому +1

      @@amcrae1 the intake valves. Direct fuel injection technology causes the tops of the intake valves to gunk up like crazy because fuel never touches the top of the valves.

    • @andresruiz7849
      @andresruiz7849 2 роки тому

      @@tubamike wolfsburg