I'm right in the middle of a complete respray with this stuff and let me assure you, neither of these guys resprayed their entire vehicles with it (themselves) and certainly NOT in an afternoon with a "few mates & beers". This option is not something you can do in an afternoon, especially if you plan to respray your rig including the door apertures, doors and bonnet inside & out, you also will need to remove your tub or tray if you are uterised. Even if you plan on masking everything up and just shooting the outside panels on a wagon, let us consider that; * You need to thoroughly clean & degrease the vehicle, then let it dry * You need to mask & sand (preferably) past the clear coat * You need to reclean the vehicle with wax & grease remover and tack rag it * You need to then apply grip40 or similar to any plastic (2 coats) then let it flash of 20min * You need to then mix and paint and let me tell you, if you are tinting it you will not be doing it in the bottle - I wouldn't even do the fill, shake shoot thing with black after seeing how viscous it is. * Once mixed you have an hour to get it on or it goes off, you need to wait 60min between coats but if you go more than 5hrs you need to scuff & reclean before recoating * You cannot let it get water on it for at least 72hrs and in my experience you can still damage it by day 2 if you do something thoughtless and have thinned it to use an HVLP gun. You cannot put any load on it for that 72hrs and given my experience I'd say longer if you thinned it. It hardens completely in 7 days. If you are doing it at the moment in cold weather add 30% to the above. Not dissing the product, just letting you know, plan for a week off the road as a minimum unless you would like to try to sand all the bits that aren't falling off by themselves in 12 months. Prep and curing time is absolutely critical.
PLEASE READ THIS!!!! I’m a painter by trade and I deal with these types of paints and spray guns all the time. One problem with raptor is it contains “Isocyanates” which is extremely poison if inhaled or consumed, (and is not good to even touch). PLEASE if you use raptor use gloves, safety goggles and minimum a duel filter respirator with chemical grade filter pads in them. It won’t so much hurt you instantly but in 30-40 years time if a lot is exposed to your body
Did my whole surf. This stuff is absolutely awesome. Did the whole car over a Saturday and the next day took it out mudding, didn't phase it. I take my truck everywhere (down quad bike tracks, thick bush, making new tracks) and there are barely any scratches. Of course everything has it's limits but I'd hate to see what my 4wd would look like without it. Definitely worth it.
I love watching 4wd Action. It’s so cool to see you guys take a basic 4x4 with 32” tires and lockers up and through just about anything. When you guys say out in the “bush” you mean out in the bush. Cheers from the States. 🤘🏼🔥
I've been thinking of raptor coating my rig for a while and seeing how easy it is I will be looking into it more, great info and cant wait for the next video
i have been using this stuff for a while now. almost sprayed the entire jeep xj... it is really really easy ! since it is thick it does not run as easily as most paint. and the key to adhesion is prep. the main problem that i run into when trying to apply this is finding good enough weather to apply it. where i live it is normally cold or humid when it is warm it needs to be over 68 degrees F (about 20 C) and less than 60% humidity, and needs 3 days before it is exposed to water, and 7 days to fully cure .!. also suggest using u-pol acid #8 etch primer first if you are spraying raptor on bare metal (it can also be sprayed on with a HPLV spray gun or rattle can)
@@chrishiggins1811 oh, and the raptor kit comes with a gun OR without... i paid like $10 more for the kit with the gun and it works well. however, it does NOT come with an air fitting, dont let that catch you off guard. i have used 3 kits (12 liters) of black so far. i have coated the interior floor, entire underside, two axles, and two bumpers. i have not done the exterior yet because i still have some custom body work to do. but i think i need 1 & 1/2 more kits (6 liters) to do the entire exterior and will probably try to mix some color into to that. so in total i probably end up buying 5 kits and 3 quarts of acid#8 to the complete the entire jeep cherokee xj inside and out and maybe have a liter or two left for touch up.. and remember to wear eye protection, a good respirator, and keep the over spray off of anything that you dont want coated (including your self), cause it does not want to come off... good luck!
@@MrMrsregor thank you so much for more info, I've been doing some more thinking about it and thinking of coating the inside floor too to kill some noice. So doing the inside and outside of the rig I'd be looking at 5 or 6 kits by the sounds of it and 3 or 4 quarts of acid#8
Nice one lads! Ive used Raptor on a Jimny pickup project recently and its very good stuff. No marks from tight green-lanes and easy to apply and look after :-)
my boss painted his entire zook ute in raptor , looks great , had the raptor triton come into my work after he did it they wanted to sponsor it use it as a example car
You guys spruik everything! Got any kitchen sinks to recommend? Much appreciated though, it's awesome to find so many Australian-made products thanks to you.
How much did it cost I have a 79 f150 that needs some new paint and it's black so this stuff might be the ticket I also want to do tune chassis in the gritty texture
@@wyohorseman9948 It was about 120 per box, if I remember correctly. I did about the lower half and it could use more. I would just POR15 the frame honestly unless your going for a look. I would plan on 2 boxes if doing whole truck body, cheers
This would be perfect for the tub of utes. Never liked the plastic liners so this is a better option. Thinking also great for the bike trailer as well.
whiskeyinthejar24 correct. Yet people still opt for the plastic liner more often. In person I didn’t like it as a paint job on the 80 but I guess it was a budget option.
Once RAPTOR has been applied and is cured, just like any paint coating, it would need to be removed by sanding it off, either down to the original substrate or to bare metal.
@@nhouston6179 Yea, clearly I should have been internet specific, I meant "in general" not the freaking rhino liner....Australia/4WD Action...cool stuff in general.
$900 isn't any cheaper than regular 2k car paint. The only difference is that you can be lazy with the prep work and it won't look too bad. That's why regular paint jobs cost a lot more than $900 - the cost of the paint is peanuts compared to the labour required to prep the car.
my mate sprayed his trailer with this.. he use to continually touch up rock chips and rust because of chips/scratches but he hasn't had to after he sprayed it about a year ago...
Have been thinking about doing this to my hilux for about a year now, it's very overdue for a respray too, I feel the universe is telling me something seeing this vid pop up!
ive got a sticker on my 4x4 .. "dont mind the scratches" " i like it rough ".. but now the kids have seen this and i must say think it will be nice not to see the scratches ..
Gidday Lads, What colour tint did you guys use for that particular Triton? I’ve got 2 full raptor tintable kits here at home waiting for a good weekend and love the colour you guys picked.... would love to use this exact tint! Cheers!
Hiya! We are pleased you like the colour, The Triton in the video was tinted with RAL7024. Solid Graphite Grey. If you have any issues tracking it down let us know, and we will see if we can help :)
@@U-POLAustraliaNZ um mostly at this point is my aluminium rims on my 4x4 as i do a lot of beach driving and the beach sand has scrubbed my rims so was thinking of using your product to not only protect my rims but pretty them up, and thank you for your reply
Raptor Tintable can be tinted with any automotive 2K Paint. The colour selection is only as limited by your imagination. Being a textured product, pearls and metallic's are not as vibrant or noticeable.
If filling the Raptorcoat bottle is anything like you cooking Shaun......LOL Of note, do the instructions tell a person or persons what cleans off the excess Raptorcoat effectively from other surfaces or even skin? Cheers :-)
Once RAPTOR has been applied and is cured, just like any paint coating, it would need to be removed by sanding it off, either down to the original substrate or to bare metal.
hey boys whats going on at 4.45? are you cutting the paint right back before applying? if so, grit? how much to take off before its ready to apply raptor? great outcome on your project!!
I think it's in one of the DVD's that came out with the magazine mate. They aren't all on You Tube. You would probably need to order out of their back catalogue to get it.
PJ one of the great advantages of Raptor is you can choose any automotive car colour because you tint the product with automotive 2 pac paint. So is it Toyota 045 or Nissan QV2?
Seeing a lot of people do it to their older 4WD where the paintwork is faded and rough. Shauno did it to his car because he repaired all the panel damage and it was way cheaper than an auto paint respray!
What about for use on bash plates? I have stainless ones at the moment which are all scratched up so i think this coating would look much better but not sure about the durability
Once RAPTOR has been applied and is cured, just like any paint coating, it would need to be removed by sanding it off, either down to the original substrate or to bare metal.
After running raptor for a few months now and it's great but an absolute arse to clean mud stains so if anyone has any good pre mud protection or good ways to remove it give me a shout, also this paint is not as hard as people make out it does chip just as easy as normal 2 pak however the best thing is Bush scratches don't show as much but it will scratch if you have a branch scrape down the side of the truck.
I coated the kids in it, they don't need helmets or anything now
Might do it on the old feller, never need to wear a Johnny again.
I'm late to this party. but thanks for making me laugh today
@@MrParker300 I was thinking the same mad my day
They dont need anything now because they're dead
@@dylanmccallister1888 😂
I'm right in the middle of a complete respray with this stuff and let me assure you, neither of these guys resprayed their entire vehicles with it (themselves) and certainly NOT in an afternoon with a "few mates & beers". This option is not something you can do in an afternoon, especially if you plan to respray your rig including the door apertures, doors and bonnet inside & out, you also will need to remove your tub or tray if you are uterised. Even if you plan on masking everything up and just shooting the outside panels on a wagon, let us consider that;
* You need to thoroughly clean & degrease the vehicle, then let it dry
* You need to mask & sand (preferably) past the clear coat
* You need to reclean the vehicle with wax & grease remover and tack rag it
* You need to then apply grip40 or similar to any plastic (2 coats) then let it flash of 20min
* You need to then mix and paint and let me tell you, if you are tinting it you will not be doing it in the bottle - I wouldn't even do the fill, shake shoot thing with black after seeing how viscous it is.
* Once mixed you have an hour to get it on or it goes off, you need to wait 60min between coats but if you go more than 5hrs you need to scuff & reclean before recoating
* You cannot let it get water on it for at least 72hrs and in my experience you can still damage it by day 2 if you do something thoughtless and have thinned it to use an HVLP gun. You cannot put any load on it for that 72hrs and given my experience I'd say longer if you thinned it. It hardens completely in 7 days. If you are doing it at the moment in cold weather add 30% to the above.
Not dissing the product, just letting you know, plan for a week off the road as a minimum unless you would like to try to sand all the bits that aren't falling off by themselves in 12 months. Prep and curing time is absolutely critical.
PLEASE READ THIS!!!!
I’m a painter by trade and I deal with these types of paints and spray guns all the time.
One problem with raptor is it contains “Isocyanates” which is extremely poison if inhaled or consumed, (and is not good to even touch). PLEASE if you use raptor use gloves, safety goggles and minimum a duel filter respirator with chemical grade filter pads in them. It won’t so much hurt you instantly but in 30-40 years time if a lot is exposed to your body
4wd action is not only the most entertaining show, but you can learn so much about 4wding. Love Thursdays cause of these guys🤙🏻
Have to say mine 8 months later still looks brand new its great stuff.
Did my whole surf. This stuff is absolutely awesome. Did the whole car over a Saturday and the next day took it out mudding, didn't phase it. I take my truck everywhere (down quad bike tracks, thick bush, making new tracks) and there are barely any scratches. Of course everything has it's limits but I'd hate to see what my 4wd would look like without it. Definitely worth it.
@Mason Fraser Thanks for the feedback! Enjoy
Amazing how easy to use raptor is, makes us all look like professionals with the right preparation!
I have had my whole MN Triton painted with Raptor and it's awesome!! Love 4WD ACTION!!! watching from South Africa
4WD Action is the best show by far in Australia
Unpopular Gaming I think you mean in the World lol I’m in the USA and I love these guys and can’t wait to finally meet them
@@sirbreeden3375 my bad. In the world. I'm only 13 and this show makes me want a 4x4
@Unpopular Gaming. There’s plenty of us that love it in England too. Who knew you could look forward to a Thursday soo much!
@@sirbreeden3375 stay in the USA
I think u mean the world
I got this done to my new bar / steps / rails on the 200. Absolutely brilliant product. I have considered doing the whole car but im not 100 sure yet.
Just wondering How many tins did it take take do your side rails and sidesteps? Looking at doing mine not sure how much to buy.
I love watching 4wd Action. It’s so cool to see you guys take a basic 4x4 with 32” tires and lockers up and through just about anything. When you guys say out in the “bush” you mean out in the bush. Cheers from the States. 🤘🏼🔥
I've been thinking of raptor coating my rig for a while and seeing how easy it is I will be looking into it more, great info and cant wait for the next video
i have been using this stuff for a while now. almost sprayed the entire jeep xj... it is really really easy ! since it is thick it does not run as easily as most paint. and the key to adhesion is prep. the main problem that i run into when trying to apply this is finding good enough weather to apply it. where i live it is normally cold or humid when it is warm
it needs to be over 68 degrees F (about 20 C) and less than 60% humidity, and needs 3 days before it is exposed to water, and 7 days to fully cure .!.
also suggest using u-pol acid #8 etch primer first if you are spraying raptor on bare metal (it can also be sprayed on with a HPLV spray gun or rattle can)
@@MrMrsregor this has been great info and thank you so much for that and this how now given me more info to get my shed ready and spray the rig
@@chrishiggins1811 oh, and the raptor kit comes with a gun OR without... i paid like $10 more for the kit with the gun and it works well. however, it does NOT come with an air fitting, dont let that catch you off guard.
i have used 3 kits (12 liters) of black so far. i have coated the interior floor, entire underside, two axles, and two bumpers. i have not done the exterior yet because i still have some custom body work to do. but i think i need 1 & 1/2 more kits (6 liters) to do the entire exterior and will probably try to mix some color into to that. so in total i probably end up buying 5 kits and 3 quarts of acid#8 to the complete the entire jeep cherokee xj inside and out and maybe have a liter or two left for touch up.. and remember to wear eye protection, a good respirator, and keep the over spray off of anything that you dont want coated (including your self), cause it does not want to come off... good luck!
@@MrMrsregor thank you so much for more info, I've been doing some more thinking about it and thinking of coating the inside floor too to kill some noice. So doing the inside and outside of the rig I'd be looking at 5 or 6 kits by the sounds of it and 3 or 4 quarts of acid#8
@@chrishiggins1811 also, only mix one bottle at a time,!. if you mix more than one bottle at a time it will start to cure before you spray it
Shaun'o it only takes a two minute shake ? That's what the wife said.
You gotta peirce the bag at the bottom that contains the hardener? That's what she said.
Hahaha
😂
You guys should do a trip down to Esperance WA. There’s a ton of amazing beaches and tracks inland
Nice one lads! Ive used Raptor on a Jimny pickup project recently and its very good stuff. No marks from tight green-lanes and easy to apply and look after :-)
I will definitely be looking into this product for sure perfect for my rig
my boss painted his entire zook ute in raptor , looks great , had the raptor triton come into my work after he did it they wanted to sponsor it use it as a example car
I've been thinking about doing this for ages...
Doooo it, mate!
@@U-POLAustraliaNZ as a sponsored video no worries!! haha
I recommend it mate. I done it to the back of my farm ute n haven't looked back.
Chris Potroz just sick of scratches mate, this would be a sick way of ignoring them in future!
just got back from work..to see a 4WD vid .. perfect end
so its settled then, BEST 4WD DRIVE SHOW... IN THE WORLD! HANDS DOWN!!
You guys spruik everything! Got any kitchen sinks to recommend?
Much appreciated though, it's awesome to find so many Australian-made products thanks to you.
I just had the tub of my Z71 done and man it is the goods!
I've got a LTZ and thinking of getting a spray tub liner done, you rate the Raptor coat? How's the texture?
@@Krooker85 mate it is awesome. I should have done it sonner.
I did the whole body of my VW transporter in raptor.. Its very easy to apply and yeah, looks good..
How do you find washing a car that has been painted in Raptor. I would imagine it would be like sand paper on a sponge 🤔
It’s actually easy. I did my tray. It’s not sharp and gritty more bumpy
This stuff is Fantastic, did half my 79 Bronco, really holds up. From pacific north west USA, sold at your local paint shop.
How much did it cost I have a 79 f150 that needs some new paint and it's black so this stuff might be the ticket I also want to do tune chassis in the gritty texture
@@wyohorseman9948 It was about 120 per box, if I remember correctly. I did about the lower half and it could use more. I would just POR15 the frame honestly unless your going for a look. I would plan on 2 boxes if doing whole truck body, cheers
This would be perfect for the tub of utes. Never liked the plastic liners so this is a better option. Thinking also great for the bike trailer as well.
That's what this sort of paint was originally for.
whiskeyinthejar24 correct. Yet people still opt for the plastic liner more often. In person I didn’t like it as a paint job on the 80 but I guess it was a budget option.
What’s it like to get off and how much does it destroy the paint below it
Once RAPTOR has been applied and is cured, just like any paint coating, it would need to be removed by sanding it off, either down to the original substrate or to bare metal.
You guys have the coolest stuff in Australia.
this is sold in america also, probably lots of other countries too
This can be bought online and imported to pretty much every country.
@@nhouston6179 Yea, clearly I should have been internet specific, I meant "in general" not the freaking rhino liner....Australia/4WD Action...cool stuff in general.
Nice looking coating.
Saw the triton yesterday, definitely caught my eye
Yay it’s 4 wheel drive action
Thanks for the like 4wd action
$900 isn't any cheaper than regular 2k car paint. The only difference is that you can be lazy with the prep work and it won't look too bad. That's why regular paint jobs cost a lot more than $900 - the cost of the paint is peanuts compared to the labour required to prep the car.
Nice work legends
Graham and shauno are so convincing! 🤪
Graham i never thought id hear you say "too much time in the bush"!!! Is there such thing? Haha
Raptor paint on the undersides of a MTB frame works a treat as well.
As per usual another informative episode..CHEERS🍻🍻🍻🍻
my mate sprayed his trailer with this.. he use to continually touch up rock chips and rust because of chips/scratches but he hasn't had to after he sprayed it about a year ago...
Looks good can think of many things to use this on!
The opportunities are endless!
my 80 series has been lined for 6 years and its scratch proof to this day. SHAUNO I DMed you on IG.
Raptor coated my camper trailer. Looks fantastic. It takes a bit to get the consistency right. And it uses ALOT of product, so move quick
Have been thinking about doing this to my hilux for about a year now, it's very overdue for a respray too, I feel the universe is telling me something seeing this vid pop up!
Where's the dirty 30mk2 vid? I wanna see it carry a carton great northerns over the nulabor
And.....then I rolled it!!!- LOL just trolling Graham, your are the best mate!
gonna try this on my bullbar thanks boys
Grate video and I will do it to my toyota Landcruiser 80 thanks really helps and love you and shnwo
Really wanting my ARB bull bar done, Bet it would look sik on my Red Ranger
Love you guys
I used u pol just for my bumper and nudge bar on my camel trophy....
love your vids guys
Great Stuff Raptor , Used tintable to do my whole Jeep 🇬🇧👍
ive got a sticker on my 4x4 ..
"dont mind the scratches"
" i like it rough ".. but now the kids have seen this and i must say think it will be nice not to see the scratches ..
My favorite show! Love the work you guys do 😁
We have a product called rhino lining here in the states basically the same stuff it's awesome 100% worth it
Can also add thinners to change the texture. I did it when I did the tray and canopy of my triton. It’s in the instructions how much to use
I'm assuming thinners makes the coat 'flatter'? I really want to go for a raptor coat on my 4bie but I don't want the coarse texture as much
Tim Brabrook yes mate. I’ll post a pic tomorrow
Yeah we need to spray our 105 series we really toke that a beating
I've been contemplating raptoring the GU Patrol but a lot of people say it will de-value the vehicle.
looking very good
Can you guys do a video of every single modification to the camera vehicle????
Good idea mate! We will look into it
Awesome 🇦🇺👍
Looks good mate, will be doing my work ute, hopefully my boss ( the owner ) doesnt mind! 😂
Gidday Lads, What colour tint did you guys use for that particular Triton? I’ve got 2 full raptor tintable kits here at home waiting for a good weekend and love the colour you guys picked.... would love to use this exact tint!
Cheers!
Hiya! We are pleased you like the colour, The Triton in the video was tinted with RAL7024. Solid Graphite Grey. If you have any issues tracking it down let us know, and we will see if we can help :)
Nice
I will be doing mine in a hunter green
could even be used on boats? and I was thinking of doing my aluminium rims with it and my tub brilliant idea
DAN,,I have bottom of the hull of my Jet Ski coated in that stuff 😎
@@leonbennett3190 Noice! I was thinking more of use on Aluminium, are you happy with it mate?
Hi Dan, We have many customers using it on boats, and marine applications. We can assist with some processes to follow for the best results.
Yeah DAN its all good it's protecting the hull from getting scratched an damaged from doing beaching I'd post a pic but utube won't let u dom that
@@U-POLAustraliaNZ um mostly at this point is my aluminium rims on my 4x4 as i do a lot of beach driving and the beach sand has scrubbed my rims so was thinking of using your product to not only protect my rims but pretty them up, and thank you for your reply
How does it compare to powder coating? What’s the pro’s vs cons of a Raptor Coat, and a Hammer-tone Powder coat?
I think powder coat needs an oven to bake.
How many different colour raptor coatings are available?
Raptor Tintable can be tinted with any automotive 2K Paint. The colour selection is only as limited by your imagination. Being a textured product, pearls and metallic's are not as vibrant or noticeable.
am waiting to see it in action....... watching from Kenya
If filling the Raptorcoat bottle is anything like you cooking Shaun......LOL
Of note, do the instructions tell a person or persons what cleans off the excess Raptorcoat effectively from other surfaces or even skin? Cheers :-)
Did my Hilux 2 years ago in the factory colour looked awesome and really durable
Is it easy to take of if you don’t like it after a while
Once RAPTOR has been applied and is cured, just like any paint coating, it would need to be removed by sanding it off, either down to the original substrate or to bare metal.
why did you change from Line-X to Raptor?
so when can we expect a video of the dirty 30? i believe its being unveiled this weekend just down the road from me
what colour did shauno use the grey one?
Im pretty sure i seen you boys drive past my work today
The Triton? It was in Toowoomba/Ipswich Today!
Sick video!
That is a rad product. Can it be shipped over to South Africa?
Can you get in it the USA?
RAPTOR is available globally! Head to www.u-pol.com/us/en/home for more info on USA stockists
Might be the first in Oz to do a Deli in this :)
hey boys whats going on at 4.45? are you cutting the paint right back before applying? if so, grit? how much to take off before its ready to apply raptor? great outcome on your project!!
i put that stuff on the racks on my 4 wheeler lol
Does anyone now what episode that was or link when shauno hit the stump on his l/r door ? I miss an episode!!
I think it's in one of the DVD's that came out with the magazine mate. They aren't all on You Tube. You would probably need to order out of their back catalogue to get it.
rods907 would love to know as well
Is there a colour chart or list you can choose from?
Love your work guys👍🏻
Cheers Pat
PJ one of the great advantages of Raptor is you can choose any automotive car colour because you tint the product with automotive 2 pac paint. So is it Toyota 045 or Nissan QV2?
@@U-POLAustraliaNZ What was the actual colour used in this vid? Looks great!
@@JohnSmith-zj5mp please forgive us for the late reply! The colour used for the Triton was RAL7024, Solid Graphite Grey👌
Hey is it possible to change the colour of raptor coating
Veeraj Singh I second this question, white? Whitish? 🤪
Certainly, Raptor is available in Black, White and Tintable
@@acgolfwrx9852 Raptor comes in a Direct White! Also available in tintable.
Thanks for the reply guys this is honestly the most helpful and probably responsive channel that I ever watched. So thanks again
If one had the chance spraying the chassis would be the best
Does it protect from rust?
Hi mate! RAPTOR is very helpful in protecting against rust, for best results lay down the RAPTOR Epoxy Primer first!
Hi @U-POL Australia & NZ ,
Does this product option a “clear- coat”? (Can)
2020- March.
The RAPTOR and UPOL letters, was it added before the liner or after? Just asking cos I'm planning on doing it onto my company truck....
Can I coat stainless steel products in it and will it be chemical resistant. Like fertalizer?
Could it be available for use in USA?
RAPTOR is available globally! Please visit www.u-pol.com/ for more information.
Love it
Would anyone consider doing this to their car?
I done it to my 80 series. Come up good
Seeing a lot of people do it to their older 4WD where the paintwork is faded and rough. Shauno did it to his car because he repaired all the panel damage and it was way cheaper than an auto paint respray!
@@4WD247 Currently watching a video of someone who did this to their Firebird.
Hi Kitty! Loads of RAPTOR users have coated their 4WDs, utes and cars. Head to our website for more inspiration! www.raptorliner.com.au/uteliner
thank you for your video. how much reptor color i need to pain a car (prado)?
Hey guys, wanting to spray my truck and wondering what the process is that you used to do the logo on the triton? I need sign writing on my truck too.
Hi Lewy, If you'd like to contact us on Facebook or get in touch with us directly we can assist with the process involved.
What about for use on bash plates? I have stainless ones at the moment which are all scratched up so i think this coating would look much better but not sure about the durability
Hi Jake! We have done plates on one of our other vehicles, and will be doing the ones on the Triton too, with great results.
Is it reversable? Easy to remove if need be?
Once RAPTOR has been applied and is cured, just like any paint coating, it would need to be removed by sanding it off, either down to the original substrate or to bare metal.
It is paint...
Where is everyone getting their paint for the tinting?
Raptor makes a spray can version they sell at autozone. I did my whole XJ with 6 cans in my driveway in about 4 hours
Doing this to my GQ
What kit is needed for a bull bar respray
Hi Casey, We recently did a bull bar with 1 and 1/2 of the Raptor 2K Aerosols.
This stuff is awesome, and looks great. 4 bottles did my old Subie in less than 20 minutes (wear a proper mask).
After running raptor for a few months now and it's great but an absolute arse to clean mud stains so if anyone has any good pre mud protection or good ways to remove it give me a shout, also this paint is not as hard as people make out it does chip just as easy as normal 2 pak however the best thing is Bush scratches don't show as much but it will scratch if you have a branch scrape down the side of the truck.
What colour is mud colour? That’s probably the colour you need to pick. 😊