Car starter solenoid for outboard tilt/trim motor explained

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 19

  • @michaelpruitt6131
    @michaelpruitt6131 7 місяців тому

    Bad audio.. but this really helped me wire mine up. Thank you

  • @MusicGodsNFT
    @MusicGodsNFT 2 роки тому +4

    Please re shoot this video with better audio and more thought to the camera work. It's good information that needs to be shared. The message is lost to poor quality though. Thanks

  • @benhalkon6478
    @benhalkon6478 Рік тому +1

    Can barely hear anything but noise.

  • @kokonutkrab
    @kokonutkrab 5 років тому +1

    If I can refer to the 2 large points on the solenoid as top and bottom. Can you check and tell me if I have understood correctly. The top screw should have the BLUE wire from the tilt. The bottom screw should have the RED wire from +ve battery and a RED wire from the remote control. The right screw should have BLACK wire from -ve battery and a BLACK wire from the tilt. There is a GREEN wire from the tilt that goes directly to the remote control. My question is, is there a BLUE wire from the remote control going to the left side of the solenoid?

    • @njfishing1
      @njfishing1  5 років тому +1

      left side of youtube video screen is to remote control and right side of the screen is to Johnson 90 hp. There is picture slide show at the end of the video. You can click the minute and second in the description to fast forward to there if you watch it from PC. It does not work for smart phones. Here is a diagram I put together for how the wiring was done - instagram.com/p/BNVtooWBs3R/?igshid=1lyyldg2onedb

  • @EdBonderenka
    @EdBonderenka 6 років тому +1

    I appreciate this. Sure wish I had a plain schematic. And clearer volume.

    • @njfishing1
      @njfishing1  6 років тому

      Edward Bonderenka thx, video camera software is poor

    • @EdBonderenka
      @EdBonderenka 6 років тому +1

      The content is good. and helpful.

    • @njfishing1
      @njfishing1  5 років тому

      instagram.com/p/BNVtooWBs3R/?igshid=1lyyldg2onedb - here is a diagram I put together for how the wiring was done

  • @RichTennant
    @RichTennant 4 роки тому +1

    Can the same solenoid be used for the boats starter?

  • @skinnyguy3184
    @skinnyguy3184 6 років тому +1

    Hi mate I realise this video is quiet old but did you put a relay somewhere in the wiring or the starter solenoid straight to the trim Switch?

    • @njfishing1
      @njfishing1  6 років тому +1

      no, I don't think so. The car starting solenoid has 4 posts and I thought 2 are for power and 2 are for relay. Not sure whether my statement is correct. Others can correct me.

    • @njfishing1
      @njfishing1  5 років тому

      instagram.com/p/BNVtooWBs3R/?igshid=1lyyldg2onedb - this is a diagram i put together how the wiring was done

  • @mulespur4806
    @mulespur4806 4 роки тому +1

    Man you are confusing

  • @shannonshepherd433
    @shannonshepherd433 3 роки тому

    Dude what the heck

  • @billlutz6019
    @billlutz6019 6 років тому +1

    poor

    • @njfishing1
      @njfishing1  5 років тому

      here is a diagram I put together for how the wiring was done - instagram.com/p/BNVtooWBs3R/?igshid=1lyyldg2onedb

    • @jaytee5693
      @jaytee5693 3 роки тому

      @@njfishing1 thats not any better. Bro this didnt help at all. Made me more frustrated.