I got the same v2 intake for my base TL and I love it, well worth the money, you move the ground to the other hole and it doesn’t cause any ground wiring issues. you use the bolt and the washer in that hole where the ground wire is.
Balljoints,wheel bearings and full polyurethane bushing conversion on my 93 DA integra. My cousin and I worked from 10am till 10pm and finished. First time for both of us doing anything like that.
A camaro rear ended my TLS on Friday after I left the office in rancho cucamonga pray for my baby yall 😭😭. Just installed ball joints and bushings too smh
Im pretty sure that part that screws to the ground is supposed to make it so the intake doesn’t vibrate or bang against anything when driving. I have an 08 tl and I screwed my in right there. I also got a hydro shield to put over the filter part because it rains a lot here in Oregon lol
I just bought a 6 speed type s yesterday and it’s stock so of course I can’t hear any vtec but I’m here to watch to see if the intake helps with the sound
at 8:25 u are missing a few components.You need a Vibra Mount Stud it’ll have to be secured with a m6 nut and fender washer to secure the overall intake, I ran into this problem as well and contacted the manufacture total for everything shipped should be about 30$ give or take. ( I took the extra step and got a power band and a molded step hose along with my order.)
Aem v2 gang, gang. Mine also arrived with some dings. I bought a gray AEM sticker from eBay and threw it on top of the visible part of the intake. I also bought one of those AEM dry filter wraps to put over the intake filter for piece of mind when it's raining. Still not trying to drive through a flood tho
can you slide it through the top of the hood without the filter? i did something to my bumper and i cant take it off now, im planning on sliding it through the top and installing the filter by removing the font driver side tire and going through he mud flap
Is an automatic TL type S just as good as a manual? I have enough saved up for my first car and I been wanting to get a TL but it’s hard to find a manual one with low miles so I think I’m just gonna get an automatic
@@zombiekilet123 yeah the manual ones I see are 10k plus but even then they have 150 miles plus, seen a automatic one with 120 miles for 7k so I think that’s the better deal
Bro our v2 intake wasn’t made for the 3rd gen TL so that little piece doesn’t have a specific home. Cut or weld your choice nice video 🔥 One thing I noticed as a 05’ 6mt is between each shift the intake preloads air for the next gear when accelerating. I use that like a boost to pop into higher gears 🛩
What year is the black Acura? That front bumper looks awesome… these videos are inspiring me to do more to my 06 Acura TL I just got… I absolutely love it. But the biggest thing I gotta fix is the interior. Cracked dash, and the previous owner actually cut holes in the driver and passenger panels for speakers rather than putting them behind the grills in the door panels
Great Vid man. I just installed Moog ball joints on my 2004 Acura TL and I think it’s great? I heard a lot of mixed bags with Moog ball joints. You think I should go back to OEM on my TL?
Everyone is going to have there Opinions about parts like that. OEM is the best way but I wouldn’t stress it. They will last you until your done with the car.
Appreciate it man. Good luck with the build. I would tell you to go to Rockauto and buy a Moog kit for $350. That’s what I did when I was redoing my whole front suspension on my TL
isn’t it a bad idea to put intakes near the floor? my brother once had an air intake near the floor for a infiniti and water splashed and ruined his car
Cool to finally see someone getting big off of an Acura TL Type S build, great looking vehicle bro. Gang
I got the same v2 intake for my base TL and I love it, well worth the money, you move the ground to the other hole and it doesn’t cause any ground wiring issues. you use the bolt and the washer in that hole where the ground wire is.
i have a base tl what does the intake do ?
@@anthony_42081adds horsepower by giving more air to engine. I would suggest getting one!
@@anthony_42081plus it sounds and looks cooler
Balljoints,wheel bearings and full polyurethane bushing conversion on my 93 DA integra. My cousin and I worked from 10am till 10pm and finished. First time for both of us doing anything like that.
A camaro rear ended my TLS on Friday after I left the office in rancho cucamonga pray for my baby yall 😭😭.
Just installed ball joints and bushings too smh
part out? lol jk, I live in Riverside you’re pretty close to me but that sucks that happened to your TL.
Im pretty sure that part that screws to the ground is supposed to make it so the intake doesn’t vibrate or bang against anything when driving. I have an 08 tl and I screwed my in right there. I also got a hydro shield to put over the filter part because it rains a lot here in Oregon lol
Crazy to see where you’ve come I remember watching you install an intake on your silver TL
Sheeeesh you an OG for sticking around
I just bought a 6 speed type s yesterday and it’s stock so of course I can’t hear any vtec but I’m here to watch to see if the intake helps with the sound
at 8:25 u are missing a few components.You need a Vibra Mount Stud it’ll have to be secured with a m6 nut and fender washer to secure the overall intake, I ran into this problem as well and contacted the manufacture total for everything shipped should be about 30$ give or take. ( I took the extra step and got a power band and a molded step hose along with my order.)
Damn, I need to make a channel. I did all the same mods 7 years ago for free. People are really interested in TLS builds.
Aem v2 gang, gang. Mine also arrived with some dings. I bought a gray AEM sticker from eBay and threw it on top of the visible part of the intake. I also bought one of those AEM dry filter wraps to put over the intake filter for piece of mind when it's raining. Still not trying to drive through a flood tho
can you slide it through the top of the hood without the filter? i did something to my bumper and i cant take it off now, im planning on sliding it through the top and installing the filter by removing the font driver side tire and going through he mud flap
Just slide the intake tube up through the mud flap as
Cleanest TL on UA-cam #murdered out gang
Skip to 6:18 it’s like trying to read a cooking blog with some bs story for 90% of the beginning.
I just got a 04 to with 120k for $4500. Cant wait to start doing a few things to it
Great video, I've been thinking about adding an intake to my TL-S, looking forward to your hondata results 👍
Intakes definitely open her up! And I’ve been slackin on getting that hondata so hopefully we can do some testing Soo man
We got anotha banga
Is an automatic TL type S just as good as a manual? I have enough saved up for my first car and I been wanting to get a TL but it’s hard to find a manual one with low miles so I think I’m just gonna get an automatic
Manual is definitely better but pretty hard to find in good condition, but automatic isnt terrible either
@@zombiekilet123 yeah the manual ones I see are 10k plus but even then they have 150 miles plus, seen a automatic one with 120 miles for 7k so I think that’s the better deal
Get the manual, it's way more fun, plus better potential with mods. Also it's quicker with a good driver. Either way, buy one is good condition.
Bro our v2 intake wasn’t made for the 3rd gen TL so that little piece doesn’t have a specific home. Cut or weld your choice nice video 🔥 One thing I noticed as a 05’ 6mt is between each shift the intake preloads air for the next gear when accelerating. I use that like a boost to pop into higher gears 🛩
Dude thought that little ass torch was gonna do anything😂
Do you happen to remember what size the rubber hose is for the cai to the vacuum line is?
als since theres not a lot of air in the area, does he intake impair the car rather than help it? or you dont really notice
What year is the black Acura? That front bumper looks awesome… these videos are inspiring me to do more to my 06 Acura TL I just got… I absolutely love it. But the biggest thing I gotta fix is the interior. Cracked dash, and the previous owner actually cut holes in the driver and passenger panels for speakers rather than putting them behind the grills in the door panels
Pretty sure his is an 08 TL Type S with the A spec kit and an after market front lip I think
I just got a Acura TL type s and needs some work hopefully mine looks good as yours
Great Vid man. I just installed Moog ball joints on my 2004 Acura TL and I think it’s great? I heard a lot of mixed bags with Moog ball joints. You think I should go back to OEM on my TL?
Everyone is going to have there Opinions about parts like that. OEM is the best way but I wouldn’t stress it. They will last you until your done with the car.
Appreciate it man. Good luck with the build. I would tell you to go to Rockauto and buy a Moog kit for $350. That’s what I did when I was redoing my whole front suspension on my TL
Honest opinion that new AEM cold air intake worth it?
What type of bumper do you have ??
isn’t it a bad idea to put intakes near the floor? my brother once had an air intake near the floor for a infiniti and water splashed and ruined his car
Seeing moog parts 👀, this man know what he doing
Hey love your vids do you know where can I buy the oem Acura TL type s bumper
where you get those headlights on your black car?
Rack and pinion easily. That gave me the most hell on my TL.
Clutch master cylinder is a nightmare to replace
You could go to autozone or orielly and rent tools
Do you think pre cat deletes are good for the tl
Yes , you can find everything you need to know about them on the forums
Youd have to relocate the ground
Sen me the link for the intake i want buy the intake
endlessrpm has some
Sheshhh 🔥
Does anyone know what I should price my TL type S with 126,000miles? Clean tittle , time belt & water pump done. It’s a CBP version
Like 8k or 9k private party
Dealer trade in will screw you don't do I would advise
Does this increase hp?
Anyone has a link
Hardest... subframe replacement on the CL
Yikeeessss 😬
Why don’t you daily the tl
Looks like an rc car
dm'd you on insta about that last mounting point on the intake
What is it for. I had the same issue and just left it hanging
Got it 👌🏽
@@colewenda8903 i have a picture of it so if you want you can dm on insta @mattmenard1
@@colewenda8903 it’s a vibration mount held with a m6 nut + fender washer. I had this problem with my injen
@@MattMenard1 I just requested to follow you on Instagram. I’d love to see a picture 👍🏻.
Link
Love the content keep. Uo
Bruh why not go to like ace or Walmart for a torch? Lmao
I went to 5 places everywhere was sold out 🤣🤣
Do you worry about sucking in water when it rains. Just wondering because I was going to get a CAI but I live in Florida.
if you have the hydro shield over the filter you should be valid just don’t go over water that’ll give a huge splash from 4-6 inches
or you could buy the v2 intake and just cut it a couple inches so it sits a little higher
First
2nd