Acura TL EASY HP!

Поділитися
Вставка
  • Опубліковано 10 вер 2024
  • Here are a few ways to significantly increase HP and TQ on you 3rd gen Acura tl! This is a fairly easy DIY with the proper tools, and it should be for the following Acura TL 2004 2005 2006 2007 2008.
    .
    .
    .
    .
    #acuratl #acura #savethemanuals #honda #jseries

КОМЕНТАРІ • 23

  • @MrSamPhoenix
    @MrSamPhoenix 2 місяці тому +5

    @12:23 that’s what she said!

  • @AlxandEr29
    @AlxandEr29 28 днів тому +1

    I swapped mime to the 3.5 . Upper intake manifold . An a short ram dc intake an it slapps for me I have the 3.7 intake manifold but the plug an such is not fitting propper pins an such

    • @_MTgarage_
      @_MTgarage_  24 дні тому

      @@AlxandEr29 you gotta swap some stuff over from the 3.5

  • @nickhernandez8805
    @nickhernandez8805 24 дні тому +1

    Is it straight plug and play for a 3.5 or do you need a different throttle body to match the sensors plugs?

    • @_MTgarage_
      @_MTgarage_  24 дні тому

      @@nickhernandez8805 a 3.5 is straight plug and play, 3.7 you gotta swap over some stuff

  • @FatBoiiDaniel1600
    @FatBoiiDaniel1600 24 дні тому +1

    dont you have to tune it after installing a bigger intake manifold to actually make power?

    • @_MTgarage_
      @_MTgarage_  24 дні тому

      @FatBoiiDaniel1600 no you don't have to tune with a manifold swap the tb and the ecu is within range to adjust to it, however once you're fbo you're gonna wanna tune it so it performs at the max capacity of everything installed. But this forsure is an easy mod that does make a noticeable difference right off the get go

  • @randomdude6240
    @randomdude6240 3 місяці тому +1

    No check engine light? Mine came up for a vacuum leak so I had to put the original 3.2 back. Thinking it might be the thermal gaskets I got for the manifold spacer

    • @_MTgarage_
      @_MTgarage_  3 місяці тому

      Vacuum leak usually means something ain't completely sealed up 100%, no issues on my end at all. I don't think a thermo gasket could throw a code like that, did it run rough?

    • @acuraledgend9648
      @acuraledgend9648 3 місяці тому +2

      @@_MTgarage_ my problem was the top plentum screws ...had vaccum leak because i was missing two screws ...

    • @randomdude6240
      @randomdude6240 3 місяці тому +1

      @@_MTgarage_ well I was having issues with the manifold gaskets lining up, previous guy also had a 6mt non type s and said no check engine light on his end. Can’t be the hoses cuz I reused them for the original 3.2. Gonna have to troubleshoot 😂

    • @_MTgarage_
      @_MTgarage_  2 місяці тому

      @randomdude6240 yeah definitely double back and check every lil thing and if it's solid scan it and see what it says
      .

  • @Noypi
    @Noypi Місяць тому +1

    It easier to just port the old one than change to diffrent

  • @jesus20escamilla
    @jesus20escamilla 2 місяці тому +1

    How much hp and tq do you think it gained???

    • @_MTgarage_
      @_MTgarage_  2 місяці тому

      @jesus20escamilla now this is a good question hmmm🤔
      I wouldn't be able to really tell you about it with just the intake manifold alone because it's practically fbo, but I'd definitely say it's a significant amount. Even before when I had other j series and alone did the manifold upgrade it definitely does performance better

  • @acuraledgend9648
    @acuraledgend9648 3 місяці тому +2

    Is that from a 3.7 ?

    • @_MTgarage_
      @_MTgarage_  3 місяці тому +2

      Yes from tl sh awd j3.7

  • @wolleyreikivalley
    @wolleyreikivalley 2 місяці тому +1

    OEM stabilus hood struts $25 for the pair at autozone

    • @_MTgarage_
      @_MTgarage_  2 місяці тому

      Shoot let me go right now🚶‍♂️

    • @wolleyreikivalley
      @wolleyreikivalley 2 місяці тому

      @@_MTgarage_ dude when my hood first started sagging last winter my bro was tryna show me some yt video and the second i found them at autozone that cheap i was like lets go rn