Hi - when I press audio processing to change my settings all I get is a bunch of slide toggles that represent all the filters. All I can do is slide “in / off” How do I get into the details of all the filters ? I do have the latest firmware Thanks
Ken, my name is Ken also. I really appreciate how you stay on point without a lot of excessive commentary. Most of these other product review guys just rattle on and on … but you get right to the point. Thank u for helping me to improve my broadcast.
Great Video. I've got a rodecaster pro as well. I'm just now starting to use earbuds from the front headset. How do I remove my voice coming through the mic, but yet still hear the sounds I play or other guest speaking? Just want to remove myself from what I'm hearing.
Unfortunately, I don't have it yet, and won't be purchasing for a while since we are getting ready for a move. :-( I would recommend checking out ua-cam.com/users/TomBuck
So i love this unit but, i have not been happy with the noise i hear when nobody is talking. it's like a hum. almost like i have the gain up too much. however, i don't and i have even purchased a cloudlifter knock off to allow me to turn down the gain on my podmic. Noise is still there. I'm wondering if I should enable ducking on each channel. aside from that i love this unit. its dependable and good looking in videos. i am just a little bit of an audio snob and when i mix the podcast i really notice the tiny hum when there are dead moments in the conversation. Great video by the way.
I want to use the Rode Caster Pro for playing music from my playout software which is Play It Live which has 4 play decks, so which four faders on the Rode Caster Pro do I use, Could I just use the usb only fader? Please do a video on that too.
Had my Rodecaster now for several months and use the Rode Podmic. I am still working on my levels to make my voice sound right for my podcast. Great video.
The Rodecaster has built in phantom power. There are some use cases that a Cloudlifter makes sense, but with my mics, it's not needed. (Rode Podmic and Shure MV7.)
Great video. Very informative without adding any bloat. I just got is and trying out a Rode Mic and was cutting out every couple seconds. I changed setting closely following what you use and it worked great. Thanks!
According to Rode: If you downloaded the beta version of 2.1, you may have noticed that we removed the reverb effect from the firmware. Don't worry, it will return! We’re working on making it a more practical and fun feature, so keep your eyes peeled for it in future updates, and be sure to let us know how you might use reverb in your podcasts. www.rode.com/blog/all/rodecaster-pro-firmware-update-2-1
@@KentheContentCoach what a bummer, i intend to use this for singing live stream. the latest firmware update was released in june 2021, it's been a while yet there's word from them yet.
how can i pair out 2 different bluetooth speakers? i.e i want that the sound played from the Rode caster device, to be sent to 2 different bluetooth speakers.. help me if u know how this works.. My bluetooth speaker is the mini jbl and another bluetooth speaker.. would be nice to signal sounds to different areas of the house party.. thx
I am not sure if that's possible for your use case. You can connect a studio monitor through the headphone jacks in the back, but it will only play the sounds from the Rodecaster itself.
Thank you. I have searched many site settings you are the first guy that I came across who explained and showed why to shut off the compression on channel and just use the master..so ty..New sub 😀
Curious, I am a huge user of the RCP, and I have the Effects Editor On as well, however, I am wondering sometimes if it’s use better to use in basic mode where the effects are just either off or on and leave it at that, what are your thoughts on that. I am not an audio expert and sometimes I feel it’s a hassle to mess with the advanced settings sometimes yet I agree you can fine tune your sound. I just wonder if everyone thinks the Rodecaster Pro out of the box, leaving the adv effects editor off is a good way to record?
I'm a big believer in using all creation tools in the easiest way possible for you as the creator. I like the fine control of the effects editor, but only used the basic options until I was comfortable with expanding that. Out of the box, it's definitely a huge upgrade over only using a USB mic. I would recommend new users use it that way, and then try to learn and apply the advanced features at their comfort level!
Thank You. This is the best video on RCP settings have seen. I took screenshots as suggested. The way in which you present is easy to follow and so relatable.
Love the visuals and the walk-thru showing the individual steps! Any tech or non-tech person alike would definitely benefit from this video! Great job love on an awesome product! 💯🔥🔥🔥🔥🔥
Thank you this is very helpful something I've been looking for and Rode should pay you well for this. Also I have tried to use my Podcaster and have the output go directly to my video camera but I've never been able to see how that does thanks I'll keep in touch
Going to try these updates - thank you for this informative video!
Hi - when I press audio processing to change my settings all I get is a bunch of slide toggles that represent all the filters. All I can do is slide “in / off”
How do I get into the details of all the filters ?
I do have the latest firmware
Thanks
Great video! Thank you. Mac
Ken, my name is Ken also. I really appreciate how you stay on point without a lot of excessive commentary. Most of these other product review guys just rattle on and on … but you get right to the point. Thank u for helping me to improve my broadcast.
Great Video. I've got a rodecaster pro as well. I'm just now starting to use earbuds from the front headset. How do I remove my voice coming through the mic, but yet still hear the sounds I play or other guest speaking? Just want to remove myself from what I'm hearing.
Hi Ken, my name is Quin in Dayton,Ohio.
I need your help sir.
I need some advice.
I hope you're not too busy to help me with my Rodecaster Pro. 🤷🏾♂️
Hey Ken, I just got the Rode Caster Pro 2 Yesterday I need help setting up. 😩
Unfortunately, I don't have it yet, and won't be purchasing for a while since we are getting ready for a move. :-( I would recommend checking out ua-cam.com/users/TomBuck
so i have my rodecaster pro connected through usb-c but my sound effect arent coming through
So i love this unit but, i have not been happy with the noise i hear when nobody is talking. it's like a hum. almost like i have the gain up too much. however, i don't and i have even purchased a cloudlifter knock off to allow me to turn down the gain on my podmic. Noise is still there. I'm wondering if I should enable ducking on each channel. aside from that i love this unit. its dependable and good looking in videos. i am just a little bit of an audio snob and when i mix the podcast i really notice the tiny hum when there are dead moments in the conversation.
Great video by the way.
I want to use the Rode Caster Pro for playing music from my playout software which is Play It Live which has 4 play decks, so which four faders on the Rode Caster Pro do I use, Could I just use the usb only fader? Please do a video on that too.
Had my Rodecaster now for several months and use the Rode Podmic. I am still working on my levels to make my voice sound right for my podcast. Great video.
I'm using the Rode PodMic now and actually like it more with my voice than the Shure. Constantly tweaking though! Appreciate you watching!
reallly good tutorial love that u allowed time for screenshots and very informative overrall
Thank you! Appreciate that feedback! Have a great weekend!
Fantastic breakdown and super helpful!
Thanks Dan! How close was it to your setup?
Great video Ken. No cludlifter or similar?
The Rodecaster has built in phantom power. There are some use cases that a Cloudlifter makes sense, but with my mics, it's not needed. (Rode Podmic and Shure MV7.)
Dude - These are all the default settings. You only changed Master compression gain by 1db
why is my audio processing page different
Great video. Very informative without adding any bloat. I just got is and trying out a Rode Mic and was cutting out every couple seconds. I changed setting closely following what you use and it worked great. Thanks!
Great to hear! Thanks for checking out the video!
Do you have any settings for a dynamic mic(Samson q2u)??
what happened to the reverb? why is it gone now?
According to Rode:
If you downloaded the beta version of 2.1, you may have noticed that we removed the reverb effect from the firmware. Don't worry, it will return! We’re working on making it a more practical and fun feature, so keep your eyes peeled for it in future updates, and be sure to let us know how you might use reverb in your podcasts.
www.rode.com/blog/all/rodecaster-pro-firmware-update-2-1
@@KentheContentCoach what a bummer, i intend to use this for singing live stream. the latest firmware update was released in june 2021, it's been a while yet there's word from them yet.
I hear you man! I would follow that link and maybe let Rode know your intent!
@@KentheContentCoach i did send them an e-mail, thanks to you. i appreciate your help.
have you had any issues with an audio drift with super long pods?
Thanks bro
🤝
how can i pair out 2 different bluetooth speakers?
i.e i want that the sound played from the Rode caster device, to be sent to 2 different bluetooth speakers.. help me if u know how this works.. My bluetooth speaker is the mini jbl and another bluetooth speaker.. would be nice to signal sounds to different areas of the house party.. thx
I am not sure if that's possible for your use case. You can connect a studio monitor through the headphone jacks in the back, but it will only play the sounds from the Rodecaster itself.
I am new to audio interfaces. Do I plug this in via USB and when If I can will I be able to not only hear myself by my computer's audio?
Correct. This will route all of your audio through to your computer and in-ear monitors.
Thank you. I have searched many site settings you are the first guy that I came across who explained and showed why to shut off the compression on channel and just use the master..so ty..New sub 😀
Hey awesome! Thank you so much! Let me know anytime I can help!
@@KentheContentCoach will do,and ty
Great catching a video on a awesome piece of equipment like the Rodcaster Pro.
Appreciate you John!
Nice video Ken! Can you do a video on the Elgato Stream Deck?
Definitely in the plans! In the next few weeks!
EXCELLENT video - thank you so much for this. Exactly what I have been looking for!!
Glad it helped!
Cheers .. great video .. could you do a video demo of this set up with rose/SM7b and zoom settings ?
I will make a note of this and see if I can make it happen! Thanks for watching!
Hi Ken...Great content...thanks. Can you talk about how you use your rodecaster with StreamYard?
I actually use Ecamm for streaming. But it would be similar. I use it for all audio processing, sound effects, mics, etc.
Curious, I am a huge user of the RCP, and I have the Effects Editor On as well, however, I am wondering sometimes if it’s use better to use in basic mode where the effects are just either off or on and leave it at that, what are your thoughts on that. I am not an audio expert and sometimes I feel it’s a hassle to mess with the advanced settings sometimes yet I agree you can fine tune your sound. I just wonder if everyone thinks the Rodecaster Pro out of the box, leaving the adv effects editor off is a good way to record?
I'm a big believer in using all creation tools in the easiest way possible for you as the creator. I like the fine control of the effects editor, but only used the basic options until I was comfortable with expanding that. Out of the box, it's definitely a huge upgrade over only using a USB mic. I would recommend new users use it that way, and then try to learn and apply the advanced features at their comfort level!
Thank You. This is the best video on RCP settings have seen. I took screenshots as suggested. The way in which you present is easy to follow and so relatable.
Hey April! Thank you! Hope it helps!
Love the visuals and the walk-thru showing the individual steps! Any tech or non-tech person alike would definitely benefit from this video! Great job love on an awesome product! 💯🔥🔥🔥🔥🔥
Thanks babe!
Good stuff.. definitely a great tool . Keep dropping content
Thank you this is very helpful something I've been looking for and Rode should pay you well for this. Also I have tried to use my Podcaster and have the output go directly to my video camera but I've never been able to see how that does thanks I'll keep in touch
Is there a reverb settings in the rode caster pro? I saw a video aboit it in a previous firmware. I use the firmware 2.1.2
There is supposed to be but I've never used it. When I get back to my studio, I'll look for it. Thanks for watching, sir!
I've considered getting a Rodecaster for my music overlays and different audio effect. Will totally come back to this when I do.
Do it!
@@DanCBearded $$$
Let me know if I can ever help!
Thanks Ken another great. Video for teaching us
🤜
Great content brother.... may I ask what do you use to edit your videos?
Thanks, brother! I use Final Cut Pro.
@@KentheContentCoach thanks man!! I just subscribed...keep up the great work
This is such a detailed video, thank you!
Thank you! Hope it helps!
Really great settings mate. Thank you
👍🏾👍🏾👍🏾
🤜