Edited. 6th April 2021 Hi Everyone, After trying everything that was obvious from watching endless videos about wheel sensors, Blue wires, corroded connect etc it turned out to be my front Passenger side Wheel Bearing because the Magnetic strip was faulty. I was amazed that this was giving me all the issues ie. Christmas tree lights Abs, Ecs, Auto Gearbox and more. I hope this helps and it was a pretty inexpensive part to fix compared to the warning alternatives 😬 Alan.
@@jonathanflexman9837 Hi, when a had an issue with the brake switch pedal it can up on the computer that there was an issue on that wheel reading so I changed the sensor but still had the problem so my mechanic said last option was a new bearing and that sorted it.
Hello, Thank you for the very clear tutorial. I got the spare part from the internet. On the other hand, I need details to disassemble the cover without breaking the lugs🤔🤔!!! Thanks
How did you know the switch was faulty? My hand brake is locked on. I can't release it with the winding handle either. Is the motor or switch at fault?
Thankyou so so much the part only cost me £12 from eBay,and I followed your video and replaced it and it's fine now. Thankyou
Thank you! really helpful!
I had same problem two days ago. I've just change battery and problem is solved!
Edited. 6th April 2021
Hi Everyone, After trying everything that was obvious from watching endless videos about wheel sensors, Blue wires, corroded connect etc it turned out to be my front Passenger side Wheel Bearing because the Magnetic strip was faulty. I was amazed that this was giving me all the issues ie. Christmas tree lights Abs, Ecs, Auto Gearbox and more.
I hope this helps and it was a pretty inexpensive part to fix compared to the warning alternatives 😬
Alan.
Thank you
Hi Alan, Thanks for the info. Was this causing the lights to come and car going very slow and barely revving?
@@vistron888 Yes I think so, it would go into a limp mode and the auto gears wouldn't work as well as all the lights
how were you able to diagnose this specific wheel bearing out of all the possibilities? (i.e. other bearings, ABS sensors, wheel speed sensors, etc,)
@@jonathanflexman9837
Hi, when a had an issue with the brake switch pedal it can up on the computer that there was an issue on that wheel reading so I changed the sensor but still had the problem so my mechanic said last option was a new bearing and that sorted it.
Hello, Thank you for the very clear tutorial. I got the spare part from the internet. On the other hand, I need details to disassemble the cover without breaking the lugs🤔🤔!!! Thanks
It’s a simple clip that goes on clicks in and to open it just slightly lift up with screw driver gently from each side and that should come off
How did you know the switch was faulty? My hand brake is locked on. I can't release it with the winding handle either. Is the motor or switch at fault?
Hej how reset button