Goaliath Basketball | Basketball Hoop Installation Video: Part 2
Вставка
- Опубліковано 7 вер 2024
- Goaliath in-ground basketball hoops are engineered for durability and quality and help your athlete reach their full potential. This video will take you through the installation process for assembling a Goaliath in-ground basketball system. If you haven’t prepared your anchor kit and concrete, please go back and watch part one of the installation process in our previous video. After your concrete has cured for a minimum of 72 hours, you’re ready to assemble your Goaliath basketball hoop.
Goaliath Install Part 1 -- • Goaliath Basketball | ...
More Goaliath Goals ---- goalrilla.com
Got a heck of a deal on one of these goals week of thanksgiving and started installation last week. As an Evansville native I appreciate the Castle and USI representation
They always on sale
@@southjerseycycling106 I ended up getting ours for $600
@@bufkinmanor $699 all year at the dicks by me.. they didn’t offer that in our area but we had a nice coupon in October
@@southjerseycycling106 for the 60”?! Our local Dick’s runs $799 and what’s sad is they’re made locally 😒
@@bufkinmanor no the 54
Just put up the 60 inch today but the height adjustment is not working? Going to call them tomorrow
$900+400 before tax for me. No discount.. I didn’t consider the $1600 to $899 discount.. as I figured this is always on discount
Your instructions show the anchor plate flat on the concrete BUT the video shows it elevated and the bottom nut (Under the anchor plate) on grade resting on the concrete with an air space under the anchor plate. Which is it? (I did my anchor plate on the concrete....... concerned).
I just put in my anchor system and the instructions said that the bottom nuts would be forever imbedded in the cement. The plate should sit directly on top of your cement. The actual post will sit on top of the nuts that are above the plate then another set of nuts will be on top of the pole base. Could that be the air space that you refer to?
Can you hang on the rim? Because I just got the 50’
Did you figure out if you can hang on it I just got one
How do you level the post? Ours leans forward a bit.
@@leannemiller-mielke808 You have to turn the two bottom bolts in the front counterclockwise a few turns until the post is level. You will have to loosen all 4 top bolts a little bit at first. Then re-tighten all four top bolts once you get the post level.
Where is the nylon washers supposed to be I can’t find them anywhere in my kit
In the small parts box in a small plastic bag
It is not necessary to have 3 people. There is a better way. Check out how I do this.
Link
@@normanjacobs1135 ua-cam.com/users/shortsdQMjT4f7T-c?si=kqYi4cf3uiveVtqL
i cranked it under 7.5 and now it doesn’t go back up please help me
ummm
🔥🔥🔥
*beautifull game*
1:00 ❣🔥💃🔥
👇👇👇👇👇