How To Replace the Clutch on a Kawasaki KX85 & KX100
Вставка
- Опубліковано 25 сер 2024
- Kawasaki KX85 & KX100 Clutch Replacement:
www.rockymount...
Does your clutch feel like it's slipping, chattering, or just not operating correctly? It's most likely time to replace it, or at the very least, inspect the clutch components for wear. So, in this video we show you the proper procedures to replace the clutch on a Kawasaki KX100. The steps shown will be similar for all year Kawasaki KX85 and KX100 dirt bikes but check your OEM service manual if you are unsure.
Check out www.rockymount... for all your parts, apparel, and accessories!
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Rocky Mountain ATV/MC On Social Media!
FACEBOOK: www.facebook.c...
INSTAGRAM: www.instagram....
TWITTER: RM...
Excellent explanation, your channel deserves support👍
These RM ATV videos are so great and helpful so thank you guys and Happy New Year guys looking forward to RM Fantasy SX!
Our pleasure!
Wow thanks man ,very good content
Finnaly ive been waiting for a video on KX superminis clutch replacements
When I did this my kick starter started kicking on its own once it’s on any idea what it could be ?
Is this pretty similar to the 2003 rm 100?
Same thing bro.
I have a KX 80 I put new clutch plates in. I installed the cover. I have no tension on my clutch at all. I squeeze it. It doesn’t retract back.
I just put new plates and spring in and now my clutch is locked up but when I put the old stuff back in it works
My clutch on my 01 kx100 doesn’t seem to disengage fully. Won’t kick over. Only way is bump start. After I ride it for a minute it starts to work again. Check the plates and basket. All seems well. Any idea of what the problem can be ?
I have the same problem ever find out was it was??
I have a kx 100 with the same clutch and everything is in spec my plates are new my steals springs and my actuator arm is going to far towards the cable side so I have zero pull and I can’t figure out why it’s bugging me so bad can you please help me I used to race in Sx N mx as a privateer. But I love my 112 I’m only 5’8 170ib so it’s perfect on trails for me. I just love it and I can’t figure this out lol please help!!🙏🏽
You need to add one or two shims in between the release rod and pressure plate bearing until you reach the 15 degree angle I mentioned. On the newer bikes, the manual might give you a measurement. You'll find those shims on the OEM diagram on our website. They should be part number: 92025-1780 but verify that on the diagram. Let me know if you have any more questions -Charles
I’ve got 2000 kx 80 the arm is at about 10pm not like yours at 11pm
Bike starts fine pull clutch in select gear bike doesn’t move just revs
Why would the clutch make a whining noise while running?
I FIXED IT LOL IT WAS THE PERCH DIDNT HAVE ENOUGH PLAY ! IT WAS MAXED OUT 🤣
How did you unmax the play??
Hi do you no where I can buy them 2 little pin's that go in the clutch case cover
Very nice vid, thanks. You oiled the bearing race and soaked the clutch friction discs in red "transmission oil". Finally you added red oil to the case. Is this oil MA2 rated motorcycle oil? Does the engine share this oil with the clutch and tranny?
the engine gets the oil from the fuel that is mixed with 2stroke oil the red oil is "just" transmission oil :)
Hi! One of my bikes I have is a ‘07 kx100. The clutch worked fine one day, I put it away, and the next time I rode it the clutch didn’t work. It’ll shift, but when I pull the clutch lever in, the clutch won’t disengage. Any idea what it is? Thanks
does this transfer to kx 112? and do i need plates if i put my bike in gear and it doesnt move if i give it any amount of throttle
Yes, this process should be the same for the KX112. Check the clutch adjustments to make sure those are set correctly before replacing the clutch. But it does sound like something in the clutch system is the problem most likely.
The basket appears to need replacement
Hey I have a 2009 kx85 and just installed a asv clutch lever but now the clutch won’t engage so it’s not letting me coast in gear or take off , I think I might of stretch the cable but I want to know if I need to order new clutch plates or something??? Please help me
If all you did was change the lever, it's more likely something simpler. Did you check the adjustments on the cable by the lever?
@@rmatvmc yes I did check but I adjusted the cable at the lever to the max and minimum and still doesn’t let me put it into gear and roll , but all I did was changed the lever and bracket to the f4 ASV lever so I’m not sure what I did wrong I’m gonna check the actuator arm in the morning and see if it’s too far back
11 plates total if I counted right
does this apply to kx 112?
I would personally download a user manual for your bike off the internet and use a PDF reader for that. That way you know for sure that the instructions apply to your bike.
I saw the oil
Eesh