Kelly at KRAZ Cool Air Guns LLC . A little tip when you get a magazine jam, Carry with you a bamboo or plastic rod, When the mag jams unwind the regulator to let the air out of the plenham, this loosens the mag and takes the pressure off the jammed pellet, then slide the rod down the barrel and tap the pellet back into the mag. This way you don't have to strip the gun down. The stock mag is slightly cone shaped meaning you need to seat the pellet or slug to the front of the mag, This one from Kelly is the same diameter from front to back and I no longer have projectiles rattling round in the mag .
@@PeakyBlinder awesome dude thank you I’ve had two of these guns for 5 years and really like them but that’s just just annoying when they jam …. Thank you for the tips really appreciated
@@johnmorton105 no worrys, And you can't push the projectile to far back as the transfer port has small blades on it to prevent the projectile being pushed too far back. Then just re set the regulator and you will here the plenum fill up and the click of the mag rotating spring re set, It saves a lot of hassle stripping the gun down. Good luck.
@@PeakyBlinderok dude I messaged Kraz the same time you sent me his email but he’s not responding to my message it’s a shame I really wanted one of these to fit to my huben I’ll try again in a few more days if he don’t answer I’ll be gutted but no matter cheers bro
Awesome where do you get these from …. It’s the only trouble ammo falling through into the barrel and jamming the gun
Kelly at KRAZ Cool Air Guns LLC .
A little tip when you get a magazine jam,
Carry with you a bamboo or plastic rod,
When the mag jams unwind the regulator to let the air out of the plenham, this loosens the mag and takes the pressure off the jammed pellet, then slide the rod down the barrel and tap the pellet back into the mag.
This way you don't have to strip the gun down.
The stock mag is slightly cone shaped meaning you need to seat the pellet or slug to the front of the mag,
This one from Kelly is the same diameter from front to back and I no longer have projectiles rattling round in the mag .
@@PeakyBlinder awesome dude thank you I’ve had two of these guns for 5 years and really like them but that’s just just annoying when they jam …. Thank you for the tips really appreciated
@@johnmorton105 no worrys,
And you can't push the projectile to far back as the transfer port has small blades on it to prevent the projectile being pushed too far back.
Then just re set the regulator and you will here the plenum fill up and the click of the mag rotating spring re set,
It saves a lot of hassle stripping the gun down.
Good luck.
@@PeakyBlinderok dude I messaged Kraz the same time you sent me his email but he’s not responding to my message it’s a shame I really wanted one of these to fit to my huben I’ll try again in a few more days if he don’t answer I’ll be gutted but no matter cheers bro
I’ve messaged him 4 times with no reply probably don’t want to sell me one lol 😂
Qual a melhor medida para o magazine original?
Have you been tried a lot of shots and how to use them and how to communicate with you if the piece is excellent
It is far better as the pellets fit perfect now and don't rattle about.
Thats looks proper, You might even be able to hit the target now 😂
Pelet on pelet at 50 yards, 12 dead rats tonight, it's very good.
Just made me sick, I just bought a Huben K1 .25. 😔
.253 ammo