weight was too much at front and I change the gas tank to rear. Now I make some bigs changes on on the boat and I release soon video of my rebuild version of this boat and it's gonna go just so much faster!
😆 I was going to guess "a bigger propeller" then your text popped up but I think you should try removing the white cylinder covering the propeller first because water is limited like a tunnel. Just guessing and I don't have an rc boat yet. 😀 👍.
The propeller is catching air causing even more air bubbles and not producing thrust.. To fix this problem use either a surface piercing propeller or a v shaped hull
You need to check your water flow, its look the proppeller just push an air not water… maybe need to check the tunnel you made, air get suck up into the tunnel
Nice selfmade boat mate! I see that you can use some help tho. First thing, don't put you're exhaust pipe into the water, it will causes you drag. Second thing is that you have to balance your prop, idk if you did that just saying. Overal fun boat👍🏾
Prop needs to hook up in water ,it is way to small. 3.0 inch 3 blade for that motor. The propeller has to absorb all the power,and without water,that's impossible
YES ITS CAVITATION CAUSING LACK OF SPEED YOUR PUSHING ALL WATER AWAY FROM PROP ITS CATCHING TOO MUCH AIR. REMOVE ALL THE PIPE COVER OVER PROP AND MAKE SURE YOUR ANGLE OF PROP SHAFT IS NOT TO DRASTIC TRY TOO KEEP PROP AS LEVEL AS POSSIBLE AND JUST UNDER WATER
you should change 1.the exhaust pipe out of the water 2.bigger propeller
I had the same problem on my rc boat and the solution was to move the propeller further away from the hull
Ok, I have to try that.👍
Look like all your weight at at the front
weight was too much at front and I change the gas tank to rear. Now I make some bigs changes on on the boat and I release soon video of my rebuild version of this boat and it's gonna go just so much faster!
cool sound
😆 I was going to guess "a bigger propeller" then your text popped up but I think you should try removing the white cylinder covering the propeller first because water is limited like a tunnel. Just guessing and I don't have an rc boat yet. 😀 👍.
maybe I have to try bigger prop
The propeller is catching air causing even more air bubbles and not producing thrust.. To fix this problem use either a surface piercing propeller or a v shaped hull
Thanks!
You need to check your water flow, its look the proppeller just push an air not water… maybe need to check the tunnel you made, air get suck up into the tunnel
I remove the tunnel and I change different propeller and now it’s goes very well.
Nice selfmade boat mate!
I see that you can use some help tho.
First thing, don't put you're exhaust pipe into the water, it will causes you drag.
Second thing is that you have to balance your prop, idk if you did that just saying.
Overal fun boat👍🏾
Thanks!
Prop needs to hook up in water ,it is way to small. 3.0 inch 3 blade for that motor. The propeller has to absorb all the power,and without water,that's impossible
Engine to far forward and prop is the wrong pitch/ need a 2 blade ditch the tunnel
YES ITS CAVITATION CAUSING LACK OF SPEED YOUR PUSHING ALL WATER AWAY FROM PROP ITS CATCHING TOO MUCH AIR. REMOVE ALL THE PIPE COVER OVER PROP AND MAKE SURE YOUR ANGLE OF PROP SHAFT IS NOT TO DRASTIC TRY TOO KEEP PROP AS LEVEL AS POSSIBLE AND JUST UNDER WATER
Thanks!
That's 110km per hour lol you added 11 on to your job by mistake idea you should use it for fire wood
that's a good idea😆
And this shit supposed to be ”the fastest rc boat”😂😂😂
I changed a propeller and now it's much faster. Watch my next video its really fast now
wtf is this just trow it away buy someting proper
Why I should buy something else?
Pino you need some manners
@@PnwPryo iam good ty
@@piepo255 Rude as f$5k man, Give the guy a break.
@@Top-Jimmy thanks 🙏