Your techniques are out of the box teaching. You are saving us $$ in that special jigs etc. are not necessary. Thank you for sharing your gifts & talents! 😘
Dude, I have been watching you now for a while to get a handle on how to do stained glass. Complete newbie here. I am really impressed. I hope I can become half as good as you. I hope you will keep posting more videos. Thank you.
I now make all my glass display cases using your methods and instructionals. They look infinitely better than glued perspex :-D. Thank you very much for the outstanding content!
I use bars because they are easier / faster than pushing skinny ass roll solder into the iron; also, I buy it directly from the lead mill at half the price one gets rolls from a glass supply store. Tin is not suitable mainly because the melting point is too high. Ah, good point, the lid of this terrarium rests within the base because it is a wee smaller. Providing your cutting and 3D assembly is accurate all's good however knobs of solder near the top of the base can be employed to make it sure.
I've been so intimidated by glass cutting and soldering, but seeing it all laid out has given me so much hope that my dream projects can become reality!! Thank you so very much for posting this! I'll be investing money into my project now, and I'll use your pattern as my tutorial. 🥰👍
You make it look so easy. I'm inspired to give it a try. Thank you. I love that you can explain everything so well with just the few notes you add to the video.
This is exactly what I needed. I’ve been looking at terrariums but just keep thinking it’s sometning I could make- to my specifications, but I had no clue how to start. Very helpful demonstration, thanks!
I am way too late on this video but I had to say how beautiful this was and how meticulous your work is! I have recently become interested in glass foiling but always see people get wrinkles in the foil. Yours is so smooth and perfect. Thank you for sharing this informative and engrossing video!
Ah yes, I've done a few of these, very pretty a..... One can get a water tight finish with the copper foil only. Make sure the glass edges are very tidy i.e. clean perpendicular edges and shapes that come together without gaps. Consider using a slightly wider foil (1/4'in on 2mm glass) The important bit is apply to foil evenly to meticulously cleaned glass. You must press the foil really well, get all wrinkles out (I use a wooden pencil shaft for pressing) Lastly do a great soldering job.
Thank you ever so much for sharing your knowledge. Your instruction videos are very thorough. I hope that we see more of themI also saw that you had some horse videos on your listings. You might enjoy Clinton Anderson's videos. As a horse and dog trainer, I find that he is one of the finest horse trainers on the planet. I also believe in the barefoot method for horses. Great to see a kindred spirit.Cool wedding too. I loved seeing the Middle age garb. Again, thanks for sharing. You are awesome. :)
Yea, Kiwi's rock.... except when we are distracted by working our asses off to pay for unrealistic lifestyles, and mortgages..... and buying new objects every bloody year......
what a smart guy you are you , you are the best I am so glad to show how to make glass terrarium ,I had a plan to make table lamp let me know all details if you have it .All the angels, measurement,etc. I Will pay for that Thanks
This is AWESOME! Great tutorial! I am soo going to do this. I have all the matetials to make it already. Plus glass terrariums are SUPER EXPENSIVE. Thanks again for this tutorial. I have always wanted to know how to do this. Cheers!
Just...... AWESOME! Phenomenal talent man! Thanks so much for sharing that. I want to build one myself so I came here to search but I might have to go for a simpler design... My respects man!!
Amazing! You make it look so simple. I love your videos because they have so many tips on how to develop a great variety of techniques. Most helpful. Thank you!
You're pretty smart enough Stacey, learning from youtube is far quicker than having to dream it up for ones self. In my day it was only books for reference..... today, online gurus bloody everywhere!... haha
I am interested in making waterprisms. Can you share any tips on making watertight foil seams. I like you no nonsence approach. Tape and scrap glass and you have an efficient jig. Thank you for providing the videos.
Thanks You! it's amazing, it's been a long time Tha i am searching for this kind of videos. You have skills but you have more passion that anyone else. Happy new year.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Your techniques are out of the box teaching. You are saving us $$ in that special jigs etc. are not necessary. Thank you for sharing your gifts & talents! 😘
I've been looking for a tutorial for how to make one of these that is actually MAKING one and not just placing plants in one for so long, thank you!
Man you're a wizard. Best compliment I can give.
Your job is amazing, and you inspire people how to make a beautiful hand crafts.
Just came across this video on UA-cam, man you got some crazy skill!
Thank you for a very informative video! I liked your jigs very much! Very, very nice!
thank you soooooo much for showing how to hold and solder the angles. I have made a mess of my first attempt. You are very clever.
I also admire your talent. Thank you for sharing your ideas with other people who are interested in the technique of tiffany stained glass
That's possible the best glass cutting video available? Fantastic! I love the batch process method. Excellent!
Dude, I have been watching you now for a while to get a handle on how to do stained glass. Complete newbie here. I am really impressed. I hope I can become half as good as you. I hope you will keep posting more videos. Thank you.
Hi Mity, most excellent news.... :-)
Hey join our facebook group.....? search groups for karal studio stained glass
I am taking a class, learning this craft as I write.
I appreciate your video!
It has really inspired me!
Молодец! Классно! Дай Бог тебе Здоровья Успехов в Творчестве.
Hi!! you are so talented!! Thank you so much for share your amazing work!!
I now make all my glass display cases using your methods and instructionals. They look infinitely better than glued perspex :-D. Thank you very much for the outstanding content!
I use bars because they are easier / faster than pushing skinny ass roll solder into the iron; also, I buy it directly from the lead mill at half the price one gets rolls from a glass supply store. Tin is not suitable mainly because the melting point is too high.
Ah, good point, the lid of this terrarium rests within the base because it is a wee smaller. Providing your cutting and 3D assembly is accurate all's good however knobs of solder near the top of the base can be employed to make it sure.
I was taught the very basics of stained glass over ten years ago, your videos are fabulous and they are incredibly helpful.
Thanks for the fantastic share. I learned so much from this. I’m new to SG.
this is beautiful, thank you for sharing. Such craftsmanship.
Could watch you ( and your dog) all day, thanks. Great. Am taking lessons, but you make it all look so easy.......Carol from Canada
This was mesmerizing to watch. Now I will set out to give it a whirl on my own!
There is only one thing I can say to this work: I´am totally impressed!!!!!!!
Thank you! Never saw this before!
Many greets from germany!!!
Cheers dude.... :-)
I've been so intimidated by glass cutting and soldering, but seeing it all laid out has given me so much hope that my dream projects can become reality!! Thank you so very much for posting this! I'll be investing money into my project now, and I'll use your pattern as my tutorial. 🥰👍
You make it look so easy. I'm inspired to give it a try. Thank you. I love that you can explain everything so well with just the few notes you add to the video.
This is exactly what I needed. I’ve been looking at terrariums but just keep thinking it’s sometning I could make- to my specifications, but I had no clue how to start. Very helpful demonstration, thanks!
Thank you man . You one of the bests and I"m admire your works and learn from you a lot
I love your videos! Thanks for showing this, all the other DIY's are plastic straws or brass tubes on string.
YOU ARE SO TALENTED! The ease with which you manipulate the glass is amazing. You are very inspiring , thank you!
Thank you! You shared some GREAT techniques.
you make it look simple! it is very difficult to make it all fit together like a puzzle. inspiring work, thanks for sharing, karen
I am way too late on this video but I had to say how beautiful this was and how meticulous your work is! I have recently become interested in glass foiling but always see people get wrinkles in the foil. Yours is so smooth and perfect. Thank you for sharing this informative and engrossing video!
This is a great video. I want to see a few more before I attempt to do this. Thank you for a wonderful video!
Ah yes, I've done a few of these, very pretty a.....
One can get a water tight finish with the copper foil only.
Make sure the glass edges are very tidy i.e. clean perpendicular edges and shapes that come together without gaps. Consider using a slightly wider foil (1/4'in on 2mm glass)
The important bit is apply to foil evenly to meticulously cleaned glass. You must press the foil really well, get all wrinkles out (I use a wooden pencil shaft for pressing)
Lastly do a great soldering job.
Thank you ever so much for sharing your knowledge. Your instruction videos are very thorough. I hope that we see more of themI also saw that you had some horse videos on your listings. You might enjoy Clinton Anderson's videos. As a horse and dog trainer, I find that he is one of the finest horse trainers on the planet. I also believe in the barefoot method for horses. Great to see a kindred spirit.Cool wedding too. I loved seeing the Middle age garb. Again, thanks for sharing. You are awesome. :)
Cheers Bud.... :-)
5:56
The moment of truth
Bravo!!
Had to be a Kiwi! So much talent. Fantastic!
Yea, Kiwi's rock.... except when we are distracted by working our asses off to pay for unrealistic lifestyles, and mortgages..... and buying new objects every bloody year......
Thank you for showing me how to set up a jig like this!
It’s really beautiful to watch you work. I received a beginner stained glass kit and a grinder for Christmas. Can’t wait to get started!
Beautiful art! Thanks for the best tutorial on doing stained glass 3D.
Great work!
Very nice. Thanks for showing us that!
Inspiring! Hell, you've been inspiring me for 20+ years! Might have to give this project a go
Hey Max.... dude is that really you?.... haha
Yeah mate!
Dude, you have way patience then I do, awesome work.
I think that's the best DIY of a glass terrarium that I've ever seen. Congratulations, your job is amazing!
what a smart guy you are you , you are the best I am so glad to show how to make glass terrarium ,I had a plan to make table lamp let me know all details if you have it .All the angels, measurement,etc. I Will pay for that Thanks
What a brilliant tutorial, thank you! Amazing terrarium!😊
This, my friends, is why urban outfitters sell this so expensively. Props to you man!
This is AWESOME! Great tutorial! I am soo going to do this. I have all the matetials to make it already. Plus glass terrariums are SUPER EXPENSIVE. Thanks again for this tutorial. I have always wanted to know how to do this. Cheers!
An incredibly talented man! I love this design and I’m going to try to make one.
Very very informative and learning from the techniques you use! Thank you so much
Wow! It looks so intricate with all the mathematical calculations! It turned to great! Leave it to you to be so efficient! (Cynthia Ochoa) :-)
I do appreciate a lot your video, you are so talented. Thank you.
Thats really cool.. U r awesome... Thanks for sharing this technique...
Just...... AWESOME! Phenomenal talent man! Thanks so much for sharing that. I want to build one myself so I came here to search but I might have to go for a simpler design... My respects man!!
+Seán Duncan gezz, thanks dude, please pass on it's link to your friends.... :-)
Amazing! Man your a genius. Can’t wait to (try to) make this!!
Amazing! You make it look so simple. I love your videos because they have so many tips on how to develop a great variety of techniques. Most helpful. Thank you!
Thanks Rose, and you are most welcome... :-)
This video is exactly what I was looking for. Thank you so much! You've saved me a lot of time :)
That was amazing to watch. I'm saving this to give it a go once I've got a bit more confidence going. So glad I found your videos!
WoW! SO cool! Im not sure with my back and Scoliosis if i could do this but this is something that has Always interested me!
oh my god, thanks for all these amazing techniques!
Beautiful and so smart on that jig! Wish I thought of that.
You're pretty smart enough Stacey, learning from youtube is far quicker than having to dream it up for ones self.
In my day it was only books for reference..... today, online gurus bloody everywhere!... haha
Looks great! Well done
Perfektno, lepo, svaka čast i hvala!
Thank you for this video. I'm stumped on my next move for my cloche. That jar of stones trick is going to save me. Thank you!
Thank you so much for this video!
Dude. Amazing... thanks for the videos...
Dude you're awesome, i´ve been learning so much thanks to you! congratulations!
Me too!
Great piece of work. Really enjoyed it, thanks.
i am so excited and very motivated after watching this tutorial!
Interesting method love your videos
I am interested in making waterprisms. Can you share any tips on making watertight foil seams.
I like you no nonsence approach. Tape and scrap glass and you have an efficient jig.
Thank you for providing the videos.
God bless you and thank you so much!
amazing job what a talent you got god gave to you
You're Amazing very talented and you make it look effortless Thank You
This is awesome. And many compliments to your work.
Great video - so helpful!
most impressive part was when he drew a freehand circle in 2 seconds
Perfect circle !
what you dont see is the 20 tries he edited out
Bravo! I wish I had the skill for fine work. Beautiful!
Hi Karalnz, what is that liquid in the jar you are applying?
I hope I could find all supplies for this in here.
keep up the great work!
Thanks You!
it's amazing, it's been a long time Tha i am searching for this kind of videos. You have skills but you have more passion that anyone else. Happy new year.
Gacias por ser una inspiración para los que amamos el vidrio. Felicidades!
Impressive skills, bravo master!
Did anyone else see that almost perfect pircle around the 3:30 mark? Beautiful work.
Amazing! Exactly what I was looking for. You made it look so easy. Thank you so much for sharing your skills!
i've been waiting for someone to make a video like this!!!! thanks
Very nice work, thank you.
Hello
Thank you for the quick reply to my query on the 3D terrarium pattern.
This will be my project in the very near future.
kind regard - Dot
You love your work and you make us loving it as well !
That was amazing!! 😍 You make that look so easy and simple and I know it’s not!! One day I’m gonna have to attempt this!! THANK YOU!!!!🤩😀🤩😀
great tutorial!! Im gonna try to make one...lets see how it goes. Thanks!!
BRAHHH YOU ARE AMAZINGGGGGGGGGGGGG, thank you so much
amazing work man.. wish i saw this sooner.. working out the angles was a pain in the arse for me xDD
Hi David, the liquid is flux. This cleans the metals so they will bond together. I always use a product called "Duzall"
Wonderful tutorial ❤
Hermoso! Te felicito!!!Muchos saludos desde Argentina
Eres muy talentoso!
Beautiful work! thank you!
Awesome job. such a great project.
Love your projects , thank you for the videos 💕
Very beautiful thank you I want to make this
Wow!!blessings to you for such beautiful work!! I'm going to try this! Thank you! :)
Great tutorial and work. Thanks.
learning a lot thanks for great instruction
letters and numbers