Bob cat a very good machine if you get all the jobs done it not good to see metal in the silencers it could be wear for the hydraulic pumps what is the slew ring like did you check it if the pumps and slew ring are good you'll have a good machine you got it cheep enough to spend money on it look forward to seeing it finished 👍
Isn't the air line for your 1" gun a bit small? When I worked in a heavy duty shop the 1" gun hose was probably 3/4" ID and came off the header real close to the air tank.
This is how my uncle made his 1st million. He bought equipment at auction and oilfield equipment that was worn out. He rebuilt them and painted them and sold them for higher prices than he bought them for.
Cannot believe you guys bought a long arm e45 for 9k unreal.The swivel rebuild will be a good job but make sure you guys mark all the lines before you remove them.And before you actually remove the swivel check all the fittings upper and lower .A lot of times its just a loose fitting causing a major leak like that
Just a quick question do those pins need cleaned and lubed to put back in or are they that hard all of the time? I don't work on equipment that size but what I do if I have to hammer that hard I usually need to clean and lube the pins. Not criticizing just wondering.
It is a simple question for you. I think who would you call in your workshop that has whatever everyone else would say the magic hands and I bet you know what I mean by that.
That Bobcat is not a real American product. Bobcat is now owned by DOOSAN Industries of Korea, assembled in US, designed and made in Korea. Quality is mediocre, at best, as you can see
Very deceptive with $1000 budget. Tired of the click bait BS UA-cam videos to get you to watch. The intention to get views buy people thinking you bought it for $1000
That's a pretty good buy on that digger. No one else wanted to do a little bit of repairs to make it good again.
Sharp looking Auction score,thumbs up great video
Hey Quinton & ALL Crew & Families !!! ""HAPPY HOLIDAYS "" to ALL !!! Thanks for the videos & ""STAY SAFE & WARM""!!! 🎄🎄🥳🥳👍👍👍👍👍
Holply that wars a good lesson for your appentice to mark hoses
That's quite the machine.. weird it had so many leaks. Thanks for the video
it looks like the maintenance for 6,400 hours consisted of "turn the key"
Bob cat a very good machine if you get all the jobs done it not good to see metal in the silencers it could be wear for the hydraulic pumps what is the slew ring like did you check it if the pumps and slew ring are good you'll have a good machine you got it cheep enough to spend money on it look forward to seeing it finished 👍
Those mini excavators are a hot commodity. Leaks or not, that’s a smokin’ deal.
Great job guys thank you 😊
Isn't the air line for your 1" gun a bit small? When I worked in a heavy duty shop the 1" gun hose was probably 3/4" ID and came off the header real close to the air tank.
I will have to check i think ours is 5/8? Or something like that.
Between that and Casey's little toy, think of the farm projects that you can do!
We could build a small city haha
Great video
at what torck is that shaft nut torck to.
Nice video why dont u have a used oil furnace
This is how my uncle made his 1st million. He bought equipment at auction and oilfield equipment that was worn out. He rebuilt them and painted them and sold them for higher prices than he bought them for.
might have to use a heat source those electric heat coils ones get pretty hot
What are you going to use the Chinese excavators for?
Cannot believe you guys bought a long arm e45 for 9k unreal.The swivel rebuild will be a good job but make sure you guys mark all the lines before you remove them.And before you actually remove the swivel check all the fittings upper and lower .A lot of times its just a loose fitting causing a major leak like that
If you live within the distance that Casey can drive his Gradall, how far do you drive to work at the Nevada shop? That’s gotta be a hell of a drive.
I can't understand why my shoulder hurts? 16 lb sledge! Remember that 10 years down the road when you go to see the doctor about surgery.
Maybe you’re just pretty weak
Just a quick question do those pins need cleaned and lubed to put back in or are they that hard all of the time? I don't work on equipment that size but what I do if I have to hammer that hard I usually need to clean and lube the pins. Not criticizing just wondering.
I believe they have a tapered bore, thats why it was hard then smooth when it hammered in.
Buy a Yanmar. That’s how fix all Bobcats 🛠️
the hydraulic pump may have a serious problem.
Stay tuned! You may be right
Probably the smallest cylinders ever worked on that bench.
Rookie mistake should have marked the lines first we still learn
I just purchased the cheapest pick up at a Ritchie Bros
It is a simple question for you. I think who would you call in your workshop that has whatever everyone else would say the magic hands and I bet you know what I mean by that.
That Bobcat is not a real American product. Bobcat is now owned by DOOSAN Industries of Korea, assembled in US, designed and made in Korea.
Quality is mediocre, at best, as you can see
Junk
Why do you guys look like Canadians?
WTF do Canadians look like??
Eh?
His great great grandmother was French Canadian... for real
Very deceptive with $1000 budget. Tired of the click bait BS UA-cam videos to get you to watch. The intention to get views buy people thinking you bought it for $1000
American made that's why it needs so many repairs😂😂😂😢
Funny you say that because most diesel mechanics will agree the American ones are better and easier to work on then your euro ones
Not really the japan are more easy an reliable