I work as a paramedic and we have whole nights where we watch Andrew's videos in between calls and debate what the best way to rescue him when stuff goes .wrong, but it never does! He must have the best sense when what he is doing will go right! He does what we all dreamed as doing but never do! Thanks and keep life full of fun Andrew !
That's too funny 🤣. Andrew said that he has a sixth sense that tells him when things are about to go wrong and that's what keeps him from getting hurt.
I love how he’s done stuff that makes people nervous in hundreds of videos, but when he showed up in a cast in a video it ended up being because he just stepped in a hole runnin down a hill lol. Tbh I do sketchy stuff all the time just like Andrew, and I don’t love doing it, just like I’m sure he doesn’t, but when you work mostly by yourself, or at the most with maybe one or two people who are just somewhat nearby, you get very used to doin stuff that would be considered dangerous to most people. Waiting around for help or for a 100% safe method to do the job means the job isn’t getting done yet. There’s an art to knowing when to risk something though, and an art to knowing how to keep from getting hurt even if things go south, and Andrew is definitely an artist at both lol.
lol hundreds of thousands of people , probably millions, do as or more dangerous work every single day . They just don't record it and put it on youtube ... y'all are acting like he's breaking new ground here or something, in fact a lot of the stuff he does is only dangerous because of his lack of experience and knowledge of what he's doing
In 1979 I had the pleasure of removing the plastic from the seat of a brand new 988B and operating that machine for the following 3 months. I smiled ear to ear the entire time.
..eh, yeah, but I cringed how that one guy was getting his fingers in places to potentially get them pinched off😬..on a lighter note, anybody else notice that the front tires looked much bigger than the rear tires before the new ones...and after getting the new rear ones, the front tires are now the ones that look much smaller?...
@@oogie149 I had not noticed that tire thinking the tire was rolling away when Andrew was playing inside of it. Is Oogie your nickname? What's your actual name? I had a friend with that nickname.... his real name was Howard.
Yeah, like a multi-tool that clips to a belt loop. I had one ordered within 15 minutes of seeing Andrew showing his. He's worth a fortune to those companies.
Yeah, but they're smart about it. Note how every time they enter the risk zone, they use the crane's boom to protect them. Pros. That said... those tires are junk, special import from copy/paste land.
I forgot how big of a monster that 988 is until you brought out the skid steer at 37:34. Really puts it into perspective how much material that machine can move.
And that's considering that the TL10 is one of the bigger skid steers out there, there are machines half the size of that and less than a quarter of the weight
"If land near you ever comes up for sale, buy it" We have been following that rule big-time. Over the years, we have bought up the five parcels around us, and they have doubled in value at a minimum, but one of them is seven times what we paid for it now. We bought the land just so we didn't have neighbors, but have quite the retirement nest egg now! 😊
I've been trying for years. People don't like to get rid of even trash here and I've got plenty of videos on that. Also alot of people don't want others to get more land than them or the next guy. An acre went from 3k to 150k in the past few years lol
@@AndrewCamarata Its been 3 months now, when are you giving us the video to where you moved the 988 to and the work you did with it. Was it to your mountain?
@@AndrewCamarata Youve been my favorite UA-camr since the bridgebuild some five years ago and watched all your videos. Some more than a dusin times. Even though my english is fairly good after living in northern CA for 16 months together with my late american wife (Im back in Denmark since 2020) - I do appreciate you taking time to text your vids as noise and circumstances can make it hard to hear the comments. Keep up the good work. :)
I struggle to put tires on my lawn mower, this is insane! Love all of Andrews content. This might be the first time he has had to hire anyone to do anything, these guys are talented.
The rock quarry we haul out of got one about 30 years ago I can remember the first load he put on me one scoop and he was blowing the horn I was like what are you doing I figured it out when I got to the scales and he had dropped 16 tons on me.
Now that I dwell on it, I think I have PTSD from moving all that around, hahaha. One little two stage Toyota forklift in the warehouse and no cranes on the trucks.
@@jamesscott1932 I did to from small trailer tires to 4500 lb earth movers . the worst job was branding with hot iron in summer time ATL tires for them.
Nice to see a new video . The guys on the tire change for the loader ...not their first day of that rodeo ! They were probably glad to be on dry clean work environment . Nice finish .
I thought it quite funny when Andrew left the 988 sitting there and suddenly there was a "micro-loader" moving stone. It looked so small next to the 988!! Great video!
Yeah watching the rear wheels come up with a load of rock is pretty impressive.. then the TL moving lil pieces is kinda comical and puts it into perspective 😅
Seeing the tire technician work reminded me of the late 80’s early 90’s. I used to change tires the same way. I have changed hundreds of big loader and scraper tires.
Andrew you have any man’s dream at your feet, ground to move and improve and the machinery to do it. I can remember when I first started farming I had an old TE20 grey fergie and that was it but slowly built my gear up, I used to get so annoyed as established farmers would have farm implements as garden decor and I could have refurbished it and put it to practical advantage. Love your vids man
Induction coils are amazing. For maximum effect, try flash cooling the component before loosening. The heating expands the bolt, crushing the debris in the threads, the debris acts as an insulating layer so not all of the heat is passed to the surrounding metal. Flash cooling will then shrink the bolt faster than the surrounding material, allowing penetrants to seep in. It's another step if loosening when hot fails. Good work man...
@@AndrewCamarata Since you havnt posted that much lately - I was hoping you were doing the carport extention or a bigger shop/garage were you are able to have almost everything under roof. I feel sorry for the machines to stay outside just rotting even if they are old.
It never ceases to amaze how powerful earth moving equipment can be .. that bucket has gotta be a 7 yard bucket , and a yard of stone weighs between 2500-3000 lbs .. that means that loader is lifting up to like 20,000 pounds.. that’s like lifting 5 cars at once
When they debuted the 675, (the original loader in the mega-loader class), Michigan actually promoted them as a way to eliminate haul trucks entirely. Bucket capacities up to 36 cubic yards were offered (likely for coal) for a capacity of 36 tons or so per bucket (!). The 988, I believe, was offered with a maximum closer to 16 yards, although that would have been a newer generation than Mr. Camarata has here. There have been a wide variety of loaders sold as 988s with capacities from 9 yards on up. Either way, these are massive machines capable of moving amounts of stone that are hard to wrap your head around.
Been so long since I 've seen a new Andrew Camarata video that when one shows up, I am watching it🙂Thank you Andrewe for the great video, great to see him back at work, with some property management projects and fixing his equipment. So great to see... Have really missed him. The gentlemen that installed the new tired after taking the old ones off, My hats off to both of them, they did and awesome job! WOW!! what an improvement you made with that upper driveway, where the hot tube is.. looks 100% better now..seems like Cody and Blue liked it..
Always love your videos. Thank you for putting the time and care into making them. I know it gets tedious at times and tiring, but I simply can't wait until you show another one. you and watch Wes work, diesel creek with Matt. Samantha is a joy to watch. She is very talented. Love watching you two together in a coordinated effort. Mark
Dear Mr. Camarata. 👍👌👏 It's obviously quite a harder job to take off those big beefy tires than I imagined. The guys did well (at least I hope so). I'm happy to see that you got rid of the old, worn down tires for free. Nice landscaping job by the way. Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards, luck and especially health to you, your helper and the dogs 💚💚.
Wold love to see you make a big cut in the mountain property. And make a really nice road there and have the loader there so we can see it get used a lot more. Love the vids from Norway 🇳🇴❤️
@@meric242empire He's never had this big loader up on the mountain. He only used it on the blasting job then parked it up. He needs to take the cab off to move it anywhere anyway, hence removing the ROPS in this vid as he's got a job for it. (Maybe on the mountain? Who knows?)
Thanks Andrew. As always, it's relaxing and a pleasure to watch YOU work. You've got the right attitude. There isn't too much that gets to you. When you do what you love, you'll never work a day in your life. 👍👍👍👍👍👍👍
I'm glad your putting that roll over protection back on , ...I've already lost one friend from a rollover, I don't want to loose another my friend ! ❤️🍺😎
Love the fact that your not scared by older machines in fact they tend to be very reliable as they have very little electronic components to go wrong and they're designed to be repaired as if you're a machinest you can make most components
yea especially when they were putting the "catch ring" or whatever it's called back on the rim with the new tire being held by the lift, if the tire slips while your fingers are in there they are gone 😅
Are always very dangerous. Especially the ones that were on the 3/4 and 1 tonnes back in the 60s. We called those Widowmaker. This was before the tire cage. for safety. And in the mid-to-late 90s. Those tires and service charge was 10 grand each.
You have a lot of things now. I remember when you only had the yanmar and John Deere back hoe and it is so amazing to see how much you have grown. Keep it up
That opening shot was a shock. I remember when I first started watching Andrew, that lot was empty and the castle was a box. You've come a long way son. 😉 👍 Good to see you brought in the Big Guns. What! Andy's not changing the tires? Good move. 😁
Big tyres, those! I worked for a tyre distributor [Toyo] for a while, and one of those earthmover ones got away from us as we were unloading it from a container. Trundled off down the warehouse and flattened twenty feet of racking!
20 thousand dollars for a couple of new tires, I hope your job for the 988 pays well. Great video, it gives a good insight of what it takes to change those tires out Thanks for sharing.
new video, nice. Thought Andrew ruined the big 40v Makita impact right in the first 5 minutes lol. The wibble wobble bottom with the battery is normal. Have the same impact for my cars, and works very well with driveshaft bolts and stuff. But a cat loader is a diffrent world of course. But you need the proper impact sockets. They make a huge diffrence. The small induction heaters are nice too. There are a lot of induction spools in all diffrent sizes on ebay. All chinesium, but its only a thick copper wire with a fabric mantle with a few bends in it. And of course you can bend the spools yourself, make the loop bigger or smaller so it fits the screw or nut.
Impact socket do not make a difference. Testing has shown that. Socket wear over time regarldess if you use impact or not. Google it and you might learn something.
@@kameljoe21 Well I've never seen an impact socket split like that chrome vanadium one in this video, and I've been on the tools for 35 years. What you get is a thicker wall on the impact sockets, so that counts for the extra strength. Yes, all tools wear out over time, but the first thing I was taught was using the right tool for the right job.
@@nickmaclachlan5178 I have seen split, cracked, wore out, broke, chipped and all kinds of sockets of a number of sizes from 1 in down to 3/8 drive in ever size you would think. Chrome sockets are slighty more brittle which means they are overall stronger which is why they will split or shatter. Impact are softer and you can see this by the wear on the inside and drive en of the socket. I have also seen impact sockets shatter. The only thing chrome socket might do it wear you drive anvil down because its softer than the socket its self. When you pay for snap on tools they do not care and will replace the tool because its broken. I stood in a friends shop in which he had a worn out socket that was quite loose and worn to which he wanted replaced and the snap on guy clearly stated that because the tool was not broken he could not replace it. He went over to an hydraulic press and proceeded to crush said socket and then returned it back to the truck while the snap on guy walked back in to the shop and handed him the socket. Then in a fit of annyonance he went over to his tool box and pulled out half a dozen screw drivers and clamped them in to a vice and twisted all of the handles off while the snap on guy stood watching. He then handed them the screwdrivers for replacement and said I have all day so next time replace the tool and you can break it on your time. This was a decade or so ago. The same guy another time bought one of those snap on cordless impacts and a battery faulted and he was so pissed as it meant no more lugging around hoses and everything else. When the snap on guy showed up he fought over the warranty. Keep in mind every tool that you can get from snap on was in this shop. Even crap he used once and never used again and sometimes those cost 100s of dollars. He was irate as he had not had that impact that long and while I do not recall what ever it is. I do know that when it come to anything battery and electric warrenties are clearly different. He was so irate at this guy that I helped break entire sets of sockets, hammers and screwdrivers even bent a whole set of those pry bars. Later that day he called someone up who had a cnc machine plasma cutters and had them make him a metal sign and then welded and painted that press red. It said on top Snap on destruction zone. With some real thick metal. About a year later or so when smart phone became even more popular he had printed out photos of the snap on guy's face of disappointment. In the end he had to pay out of pocket to buy a new battery for the inpact. This is what made him so made. There are some other things he has done. For example snap on came in the shop and he was using a screwdriver as a pry bar and the snap on guy proceeded to sell him a couple of set which I do not recall. Being petty as he was the next week he exchanged all his bent screw drivers for new ones. And he said didn't you just buy a new set of pry bars and he said sure did and pointed up on the wall where a nice pretty box with a glass door on it says Emergency Pry Bars or break if need emergency pry bars, can not recall 100% off the top of my head. I mean a pretty oak box with brass hinges. Might even have said Snapon on it. It was painted on the glass in red paint and some gold edges. Like I said he was petty and did thing out of spite. On the wall in another place is a 10mm sockets that if one is moved the light blinks until it replaced the speaker some how got a screwdriver shoved in to the speaker and no longer works. He made that after an old timer who I was with one day said lets steal his 10mm socket. While I did not take it he sure did. Which resulted in him buying a replacement and having that thing made. Only to have that spot in his box remain empty till his death 6 or so years later to which he got it from a lawyer who has had it in possession not long after he took it. At the time I though he was joking and when I seen him a week or so later I seen that contraption and it never dawned on me that the old timer took it. Any ways the socket and a photo of him is up in the shop in one of those shadow boxes that says something like if you ever wondered where that 10mm when this guy might have taken it contact his lawyer or something like that.
@@kameljoe21 I see it on my cars, every time I change from winter- to summer tires. Aluminium rims, with steel wheel bolts, + 5 months of salt. With the makita mid torque and a chrome vanadium socket, no chance. With a chrome moly impact socket, 2 seconds and the bolt loosens. Thats proof enough for me.
That Makita had a crack all round the bottom of the handle/battery housing, wasn't doing it any good. It hadn't passed the Camarata Stress Test. Either that or it was used as a hammer or got driven over by something........ you know this channel! 😁😁😁
Had me wondering too. The XGT tools are very very nice tools, not as good as Fein, but for a global brand like that very well made, and finally with enough power
Well done Andrew ! Back to your usual high standard. Appreciate the work you put into mixing GoPro and Drone shots with music and change of angles. A lot of time involved putting all of that together but that's what makes your vids stand out.
Andrew you should get some rock chains for the tires so they don’t get beat up. All the rock quarries seem to have them on their loaders so tires last longer.
35/65r33's those are the biggest tires ive installed haha! these guys make it look easy; that's a quality tire shop right there. awesome video Andrew, thanks for showing this. takes me back to my tire shop days (not that i miss it, that job literally broke me). they need a needle scaler for the rims haha! also, if it was me, i would have rotated the new ones to the front, as the fronts typically see WAY more abuse than the rears. in either case, im happy to see new tires on this beast haha! :P
@@sjv6598 that's a good question, and im not sure. Could be from spinning while trying to get a full bucket load. That's probably the only thing i could think of... none of the contracts were doing quite what Andrew does, they were mostly mills and stuff like that, not quarries
When I first started watching UA-cam and looking for snowplows for trucks, Andrew's plowing snow was the first one I watched, and I have been hooked ever since.
Awesome video Andrew! Your work with the wheel loader is truly impressive and incredibly entertaining to watch. It's amazing how you single-handedly clear the property and make moving the earth look so effortless. Keep up the fantastic work!
I love these videos. I can't imagine how much work it takes just to keep all the equipment in running condition. It is clear to me that all your hard work has really paid off.
Very cool video , watching him dig out the hillside rock you lose how big that machine is till he was running the bobcat next to it .Thanks for taking us along . B
Great job - you really made a ton of space out of that scraggly lot! And those tires - man, would've taken a whole rubber plantation just to make 2 of them; I shudder to think how much the new ones must've cost you..
Any day with a post from Andrew is a good day! Curious - he has over a million subs, but lives in the county with a lot of land, old timers and seems to keep to himself and isn't flashy with dumb cars and shit. I wonder if he gets recognized in his "town" much lol.
@@JJ-yn8fl Yes, it doesn't look too terribly different from where I live, Central North Ga., not far from the TN/NC line, not far from SC either..what is happening here, though, is the urban sprawl from Atlanta is spreading out, creeping in like a cancer, invading our mountains, and consuming the beautiful farmland further south..I was afraid as big as NYC is, it was doing that to the rest of NY state, as well
Ditch Witch 6510. I was the illustrator that created the art for the operation and parts manual. I enjoyed working for Ditch Which. I didn't care much for the area though.
boy does this bring back memories, I did OTR tires for a company out of Lancaster California 23 years ago I've done tires on everything from 613s to 666 scrapers, motor graders, and wheel loaders from 992s down to 906s even 825 rubber-tired dozers, I even had a 350lb 14.00-24 motor grader tire fall on me once. the good old days, LOL
I priced out new tires for a Hough loader I have which is about the same size as the 988 - over a ton and nearly $10K EACH!!! Decided to stick with the old ones. However, I needed to have the bead seal replaced on one, took the mobile guy nearly two hours and cost just shy of a grand.
Them putting the boom against the center of the hub while airing the tire up is a sign that they know not just what they are doing but that it is dangerous. Using the boom as a safety should the ring pop out, Bravo guys. Bravo. That trick was likely written in blood.
Such a dangerous job changing tires on those. My uncle worked for CAT out of Illinois. I remember playing in the new ones they had lying around the shop.
I work as a paramedic and we have whole nights where we watch Andrew's videos in between calls and debate what the best way to rescue him when stuff goes .wrong, but it never does! He must have the best sense when what he is doing will go right! He does what we all dreamed as doing but never do! Thanks and keep life full of fun Andrew !
That's pretty funny. I've seen Andrew do some sketchy stuff but he never seems to get hurt.
That's too funny 🤣. Andrew said that he has a sixth sense that tells him when things are about to go wrong and that's what keeps him from getting hurt.
Did you see the one where that Pettibone crane decided to plummit down the hill?
*"I didn't need to be on there anymore"*
I love how he’s done stuff that makes people nervous in hundreds of videos, but when he showed up in a cast in a video it ended up being because he just stepped in a hole runnin down a hill lol. Tbh I do sketchy stuff all the time just like Andrew, and I don’t love doing it, just like I’m sure he doesn’t, but when you work mostly by yourself, or at the most with maybe one or two people who are just somewhat nearby, you get very used to doin stuff that would be considered dangerous to most people. Waiting around for help or for a 100% safe method to do the job means the job isn’t getting done yet. There’s an art to knowing when to risk something though, and an art to knowing how to keep from getting hurt even if things go south, and Andrew is definitely an artist at both lol.
lol hundreds of thousands of people , probably millions, do as or more dangerous work every single day . They just don't record it and put it on youtube ... y'all are acting like he's breaking new ground here or something, in fact a lot of the stuff he does is only dangerous because of his lack of experience and knowledge of what he's doing
In 1979 I had the pleasure of removing the plastic from the seat of a brand new 988B and operating that machine for the following 3 months. I smiled ear to ear the entire time.
Having driven the 988 I can say it is a blast and I smiled every morning looking at it while it was warming up. Impressive machine!
thank god, you have ears. otherwise you would have smiled in a circle
=)
@@atsekjoker Like the Canadians from South Park?
@@perrybabin8427 yeah, you go ! T&P
Props to that tire changing crew. There looks to be a lot of ways one could get injured doing that job.
That crew swapping tires was pretty darn impressive far as I'm concerned. Don't care how much equipment ya have if you don't have the experience.
..eh, yeah, but I cringed how that one guy was getting his fingers in places to potentially get them pinched off😬..on a lighter note, anybody else notice that the front tires looked much bigger than the rear tires before the new ones...and after getting the new rear ones, the front tires are now the ones that look much smaller?...
@@dyer2cycle or the tire guy that thought the tire was rolling away when andrew was playing inside it
@@oogie149 I had not noticed that tire thinking the tire was rolling away when Andrew was playing inside of it. Is Oogie your nickname? What's your actual name? I had a friend with that nickname.... his real name was Howard.
@@PatrickWagz My actual names Noah sorry boss.
That's amazing how Andrew has transformed the land over the years almost single-handed.
Can't get enough of Andrew Camarata fixing equipment and handling property management projects. Interesting and always pick up a new trick or two.
Yeah, like a multi-tool that clips to a belt loop. I had one ordered within 15 minutes of seeing Andrew showing his. He's worth a fortune to those companies.
God those tyre guys have a real risky job day in day out! Fair play to them.
Yeah, I did that for work for a bit. It's neither fun nor particularly safe and I don't miss it at all.
Yeah, but they're smart about it. Note how every time they enter the risk zone, they use the crane's boom to protect them. Pros. That said... those tires are junk, special import from copy/paste land.
@@aserta Couple years and someone will be replacing them again, maybe sooner.
Особенно опасно для пальцев на руке
I forgot how big of a monster that 988 is until you brought out the skid steer at 37:34. Really puts it into perspective how much material that machine can move.
You are surely right, that looked like a child's toy when he first started using it all of a sudden.
And that's considering that the TL10 is one of the bigger skid steers out there, there are machines half the size of that and less than a quarter of the weight
"If land near you ever comes up for sale, buy it" We have been following that rule big-time. Over the years, we have bought up the five parcels around us, and they have doubled in value at a minimum, but one of them is seven times what we paid for it now. We bought the land just so we didn't have neighbors, but have quite the retirement nest egg now! 😊
Yeah, I bought it just so I would not have neighbors, some developer was trying to buy it, they probably would’ve tried to stick three houses there.
I've been trying for years. People don't like to get rid of even trash here and I've got plenty of videos on that. Also alot of people don't want others to get more land than them or the next guy. An acre went from 3k to 150k in the past few years lol
@@AndrewCamarata Its been 3 months now, when are you giving us the video to where you moved the 988 to and the work you did with it. Was it to your mountain?
When I edit it
@@AndrewCamarata Youve been my favorite UA-camr since the bridgebuild some five years ago and watched all your videos. Some more than a dusin times. Even though my english is fairly good after living in northern CA for 16 months together with my late american wife (Im back in Denmark since 2020) - I do appreciate you taking time to text your vids as noise and circumstances can make it hard to hear the comments. Keep up the good work. :)
I struggle to put tires on my lawn mower, this is insane! Love all of Andrews content. This might be the first time he has had to hire anyone to do anything, these guys are talented.
Those guys were definitely working hard and I don't envy them!
@@mbrick It looks like dangerous work.
Why taking the cab off?
@@tomppik9462 Maybe it is not longer a Taxi.
i can't believe they sent 2 guy's to do simple 988 tires, didn't clean the wheel, makes it harder on the next guy! not impressed!
My old man had the 988 in his quarry. Had Caterpillar fit the largest bucket they could fit. Was a beast of a machine. Well done Andrew.
The rock quarry we haul out of got one about 30 years ago I can remember the first load he put on me one scoop and he was blowing the horn I was like what are you doing I figured it out when I got to the scales and he had dropped 16 tons on me.
@@bobbyalley519216 ton and what ya get 😮😊
I had a job for a couple years warehousing and delivering tires like that, always so happy I wasn't the guy installing them. What a machine!
😩 yes, I warehoused tires too for Goodyear. What a tough job!
Now that I dwell on it, I think I have PTSD from moving all that around, hahaha. One little two stage Toyota forklift in the warehouse and no cranes on the trucks.
I was the guy that repaired those tires, never put one on,
Load an 18 wheeler in like 2 buckets
@@jamesscott1932 I did to from small trailer tires to 4500 lb earth movers . the worst job was branding with hot iron in summer time ATL tires for them.
Andrew you deserve all the success that you’ve acquired. Your videos are the best. Very interesting thank you
Those tire changing guys were impressive, they made it look easy!
I like it when Andrew explains what he's doing and why for those of us that don't know.
Nice to see a new video . The guys on the tire change for the loader ...not their first day of that rodeo ! They were probably glad to be on dry clean work environment . Nice finish .
He has Randy Jackson's signature on a Samurai Sword.
AC, your videos carried me through some really dark places in my life. Now that my life is brighter, I llook at your work with the same hope.
I thought it quite funny when Andrew left the 988 sitting there and suddenly there was a "micro-loader" moving stone. It looked so small next to the 988!! Great video!
Yeah watching the rear wheels come up with a load of rock is pretty impressive.. then the TL moving lil pieces is kinda comical and puts it into perspective 😅
I was thinking just about everything looks small next to the 988.
@@CerebralAilment Ya he's literally trying to move the mountain ;)
Seeing the tire technician work reminded me of the late 80’s early 90’s. I used to change tires the same way. I have changed hundreds of big loader and scraper tires.
Andrew you have any man’s dream at your feet, ground to move and improve and the machinery to do it. I can remember when I first started farming I had an old TE20 grey fergie and that was it but slowly built my gear up, I used to get so annoyed as established farmers would have farm implements as garden decor and I could have refurbished it and put it to practical advantage. Love your vids man
With my trashed disks, all i can do is sit back and enjoy Andrew do things i wish i could do. Safeguard your back Andrew and take ticks seriously.
Wow what an interesting process changing those tires. Those guys deserve to be paid well for that kind of work.
Induction coils are amazing.
For maximum effect, try flash cooling the component before loosening.
The heating expands the bolt, crushing the debris in the threads, the debris acts as an insulating layer so not all of the heat is passed to the surrounding metal. Flash cooling will then shrink the bolt faster than the surrounding material, allowing penetrants to seep in.
It's another step if loosening when hot fails.
Good work man...
Been trying to tip him for over a year to get one, good to see that he finally did
@@VonFoughmanI've had one for half a decade get with the timez!
I've often thought about this whenever watching somebody used induction coils and not flash cool the bolt. Thanks for bringing it up
where does one get a flash cooling tool?
@@Silverado21 a cup of water would do it
Outstanding video. The tire guys are fearless. You wonder how a guy signs up for that job. Absolute professionals.
Good advice on buying land. I buy it when ever it comes up also. One thing I know for sure is they'll never be making anymore of it 👍🏼
These guys are the pro’s from Dover. Great video. People have no idea what it takes to do this type of work. Enjoying the channel. Tks for sharing.
I'm worried about spending more time watching Andrew work than me actually working. 😂
Me too 😂
Your doing it wrong
Drew used to put up a video everyday 💥💥
Yeah same
I'm just glad I do similar stuff so I can entertain myself when Andrew's away
That Gear reduction tool is great! Have one here at the farm, for tractor lug nuts and such
That was my first time using that.
@@AndrewCamarata Since you havnt posted that much lately - I was hoping you were doing the carport extention or a bigger shop/garage were you are able to have almost everything under roof. I feel sorry for the machines to stay outside just rotting even if they are old.
I was hoping Andrew would explain how it works. I never seen that before. Looks very useful.
@@charlylucky7508 First time I've seen one too. Pretty impressed with them.
@@charlylucky7508 It must be a planetary gear system inside that housing.
It never ceases to amaze how powerful earth moving equipment can be .. that bucket has gotta be a 7 yard bucket , and a yard of stone weighs between 2500-3000 lbs .. that means that loader is lifting up to like 20,000 pounds.. that’s like lifting 5 cars at once
When they debuted the 675, (the original loader in the mega-loader class), Michigan actually promoted them as a way to eliminate haul trucks entirely. Bucket capacities up to 36 cubic yards were offered (likely for coal) for a capacity of 36 tons or so per bucket (!). The 988, I believe, was offered with a maximum closer to 16 yards, although that would have been a newer generation than Mr. Camarata has here. There have been a wide variety of loaders sold as 988s with capacities from 9 yards on up. Either way, these are massive machines capable of moving amounts of stone that are hard to wrap your head around.
Been so long since I 've seen a new Andrew Camarata video that when one shows up, I am watching it🙂Thank you Andrewe for the great video, great to see him back at work, with some property management projects and fixing his equipment. So great to see... Have really missed him. The gentlemen that installed the new tired after taking the old ones off, My hats off to both of them, they did and awesome job! WOW!! what an improvement you made with that upper driveway, where the hot tube is.. looks 100% better now..seems like Cody and Blue liked it..
The use of heavy equipment to maintain other heavy equipment is always fascinating to me. It's an entire cooperative ecosystem...
And that is why you can never stop at one 😇😇
So much more room for activities! Great video Andrew. Love seeing the big boys out workin’
😊well done Andrew always a pleasure watching you're projects,since i had to take early retirement miss all this,regards pat 🇬🇧🏴🚜
Always love your videos. Thank you for putting the time and care into making them. I know it gets tedious at times and tiring, but I simply can't wait until you show another one. you and watch Wes work, diesel creek with Matt. Samantha is a joy to watch. She is very talented. Love watching you two together in a coordinated effort. Mark
Dear Mr. Camarata.
👍👌👏 It's obviously quite a harder job to take off those big beefy tires than I imagined. The guys did well (at least I hope so). I'm happy to see that you got rid of the old, worn down tires for free. Nice landscaping job by the way.
Thanks a lot for making teaching explaining recording editing uploading and sharing.
Best regards, luck and especially health to you, your helper and the dogs 💚💚.
If I only could receive such a nice and motivating comment on my channel...
S.g. @@sirflooz
Dann schaumerma! 😁 ;-)
Viele Grüße, Glück und Gesundheit im Besonderen.
@@Chr.U.Cas1622 Dankeschön, ich kann es gebrauchen...und dir wünsche ich es auch!
@@sirflooz
Auch ich kann es sehr gut gebrauchen lieber Vespa Fan.
Wold love to see you make a big cut in the mountain property. And make a really nice road there and have the loader there so we can see it get used a lot more. Love the vids from Norway 🇳🇴❤️
It's in his previous videos
@@meric242empire He's never had this big loader up on the mountain. He only used it on the blasting job then parked it up. He needs to take the cab off to move it anywhere anyway, hence removing the ROPS in this vid as he's got a job for it. (Maybe on the mountain? Who knows?)
@@nickmaclachlan5178at least it’s easier to move this than it would be to move a mining loader
You know it's big, when professionals are coming to change the tires. 😎
Man, those tire guys earn their paychecks. Skill and hard work.
The scale those big machines like the 988 operate is amazing, truly 'earth movers'
Thanks Andrew.
As always, it's relaxing and a pleasure to watch YOU
work. You've got the right attitude. There isn't too much that gets to you.
When you do what you love, you'll never work a day in your life.
👍👍👍👍👍👍👍
I'm glad your putting that roll over protection back on , ...I've already lost one friend from a rollover, I don't want to loose another my friend ! ❤️🍺😎
@@bottomlands it's just a saying buddy don't take to literally
@@bottomlands with that attitude I doubt you have any friends or buddies.
Your trouble shooting skills and work ethic are outstanding! Keep up the great work!
Good to hear your neighbour decided to sell. Looking forward to seeing how you develop the new property. Keep up the great content
Interesting tool that you used to crack those bolts loose, buying your neighbors land is always a good move. Thanks for the great entertainment.
The problem with Andrew is that his videos are habit forming, and he's a all around good guy, I've enjoyed his videos for about 3 years now.
You're a rare breed sir. Just get stuck into everything and figure it out as you go 👍
Your property keeps getting better and better. Can't wait to see what else you're going to do with it!
Hi Andrew , good to see you back 😀
Love the fact that your not scared by older machines in fact they tend to be very reliable as they have very little electronic components to go wrong and they're designed to be repaired as if you're a machinest you can make most components
Ha ha, "Nothing's on fire". I think that is a good measuring stick for success. Great videoe and I loved seeing that machine run again.
I’d love to see an updated castle tour video! It’s been a while since we’ve seen the upper floors. Love the videos!
Man, that looks like a fairly dangerous job for the tire techs. Hats off to them.
yea especially when they were putting the "catch ring" or whatever it's called back on the rim with the new tire being held by the lift, if the tire slips while your fingers are in there they are gone 😅
Are always very dangerous. Especially the ones that were on the 3/4 and 1 tonnes back in the 60s. We called those Widowmaker. This was before the tire cage. for safety. And in the mid-to-late 90s. Those tires and service charge was 10 grand each.
yep thats definitely a Job where lack of knowledge can take finger and even a life.
@@wegmandan How much do you think he paid for those new tires including service charge? $7-8K all in?..more?...less?
You have a lot of things now. I remember when you only had the yanmar and John Deere back hoe and it is so amazing to see how much you have grown. Keep it up
Man they put that crane to good use, but that and their teamwork makes a very tuff job manageable! Great watching you guys work
This tire changing job, aint no joke man. I tell you by expirience. Thank you Adrew for sharing. Always a pleasure viewing your videos.
That opening shot was a shock. I remember when I first started watching Andrew, that lot was empty and the castle was a box. You've come a long way son. 😉 👍
Good to see you brought in the Big Guns.
What! Andy's not changing the tires? Good move. 😁
Ya I was shocked but totally happy he did not try that himself. Some time the right ppl for the job are reqd, cost be darned.
Always look forward to your videos, very informative 💯👏🏿
That was a real satisfying dump, of stone, and man, carving those rocks out was really cool! Awesome video Andrew! Love the life!
I’m glad you keep putting long videos out and I can’t understand why other channels insist on putting 12/18 minute clips out 👍🏻🏴
Money, 3 vids earn more money than one.
Big tyres, those! I worked for a tyre distributor [Toyo] for a while, and one of those earthmover ones got away from us as we were unloading it from a container. Trundled off down the warehouse and flattened twenty feet of racking!
The torque on that Makita on the earlier bolt was amazing. The whole body was twisting....great tool.
It wasn't really, has to do with the filmrate of the camera. Like with helicopter blades. 👍
@@Guust_FlaterLook later. The battery was breaking off. It was twisting.
Makita made the handle flexible on the bottom on purpose. It damps the vibration for the battery.
It's a good day when Andrew releases a video!
the 988 is monster great content always nice glad you getting more land
20 thousand dollars for a couple of new tires, I hope your job for the 988 pays well. Great video, it gives a good insight of what it takes to change those tires out
Thanks for sharing.
new video, nice. Thought Andrew ruined the big 40v Makita impact right in the first 5 minutes lol.
The wibble wobble bottom with the battery is normal. Have the same impact for my cars, and works very well with driveshaft bolts and stuff. But a cat loader is a diffrent world of course.
But you need the proper impact sockets. They make a huge diffrence.
The small induction heaters are nice too. There are a lot of induction spools in all diffrent sizes on ebay. All chinesium, but its only a thick copper wire with a fabric mantle with a few bends in it. And of course you can bend the spools yourself, make the loop bigger or smaller so it fits the screw or nut.
Impact socket do not make a difference. Testing has shown that. Socket wear over time regarldess if you use impact or not. Google it and you might learn something.
@@kameljoe21 Well I've never seen an impact socket split like that chrome vanadium one in this video, and I've been on the tools for 35 years. What you get is a thicker wall on the impact sockets, so that counts for the extra strength. Yes, all tools wear out over time, but the first thing I was taught was using the right tool for the right job.
@@nickmaclachlan5178 I have seen split, cracked, wore out, broke, chipped and all kinds of sockets of a number of sizes from 1 in down to 3/8 drive in ever size you would think.
Chrome sockets are slighty more brittle which means they are overall stronger which is why they will split or shatter. Impact are softer and you can see this by the wear on the inside and drive en of the socket. I have also seen impact sockets shatter.
The only thing chrome socket might do it wear you drive anvil down because its softer than the socket its self.
When you pay for snap on tools they do not care and will replace the tool because its broken. I stood in a friends shop in which he had a worn out socket that was quite loose and worn to which he wanted replaced and the snap on guy clearly stated that because the tool was not broken he could not replace it. He went over to an hydraulic press and proceeded to crush said socket and then returned it back to the truck while the snap on guy walked back in to the shop and handed him the socket. Then in a fit of annyonance he went over to his tool box and pulled out half a dozen screw drivers and clamped them in to a vice and twisted all of the handles off while the snap on guy stood watching. He then handed them the screwdrivers for replacement and said I have all day so next time replace the tool and you can break it on your time. This was a decade or so ago. The same guy another time bought one of those snap on cordless impacts and a battery faulted and he was so pissed as it meant no more lugging around hoses and everything else. When the snap on guy showed up he fought over the warranty. Keep in mind every tool that you can get from snap on was in this shop. Even crap he used once and never used again and sometimes those cost 100s of dollars. He was irate as he had not had that impact that long and while I do not recall what ever it is. I do know that when it come to anything battery and electric warrenties are clearly different. He was so irate at this guy that I helped break entire sets of sockets, hammers and screwdrivers even bent a whole set of those pry bars. Later that day he called someone up who had a cnc machine plasma cutters and had them make him a metal sign and then welded and painted that press red. It said on top Snap on destruction zone. With some real thick metal. About a year later or so when smart phone became even more popular he had printed out photos of the snap on guy's face of disappointment. In the end he had to pay out of pocket to buy a new battery for the inpact. This is what made him so made.
There are some other things he has done. For example snap on came in the shop and he was using a screwdriver as a pry bar and the snap on guy proceeded to sell him a couple of set which I do not recall. Being petty as he was the next week he exchanged all his bent screw drivers for new ones. And he said didn't you just buy a new set of pry bars and he said sure did and pointed up on the wall where a nice pretty box with a glass door on it says Emergency Pry Bars or break if need emergency pry bars, can not recall 100% off the top of my head. I mean a pretty oak box with brass hinges. Might even have said Snapon on it. It was painted on the glass in red paint and some gold edges. Like I said he was petty and did thing out of spite.
On the wall in another place is a 10mm sockets that if one is moved the light blinks until it replaced the speaker some how got a screwdriver shoved in to the speaker and no longer works. He made that after an old timer who I was with one day said lets steal his 10mm socket. While I did not take it he sure did. Which resulted in him buying a replacement and having that thing made. Only to have that spot in his box remain empty till his death 6 or so years later to which he got it from a lawyer who has had it in possession not long after he took it. At the time I though he was joking and when I seen him a week or so later I seen that contraption and it never dawned on me that the old timer took it. Any ways the socket and a photo of him is up in the shop in one of those shadow boxes that says something like if you ever wondered where that 10mm when this guy might have taken it contact his lawyer or something like that.
@@kameljoe21 I see it on my cars, every time I change from winter- to summer tires. Aluminium rims, with steel wheel bolts, + 5 months of salt. With the makita mid torque and a chrome vanadium socket, no chance. With a chrome moly impact socket, 2 seconds and the bolt loosens. Thats proof enough for me.
Godt jobba Andrew. Lenge siden sist. Savner dine videoer hver dag,gleder meg til neste.🤗
Iherdisk fyr, gitt.
Pretty sure that it wasn't about Makita being bad, just that those bolts were stuck so badly. Those new XGT tools are beasts.
That Makita had a crack all round the bottom of the handle/battery housing, wasn't doing it any good. It hadn't passed the Camarata Stress Test. Either that or it was used as a hammer or got driven over by something........ you know this channel! 😁😁😁
@nickmaclachlan5178 that isn't a crack. Its on all big impact makitas. I think it's to remove any impact away from the battery.
Had me wondering too. The XGT tools are very very nice tools, not as good as Fein, but for a global brand like that very well made, and finally with enough power
You mean that blue noodle?🤣
You heard the guy it's not like he hasn't had every brand of tool. Not worth it for the cost anymore, like most of them now I suppose.
Nothing more enjoyable than watching a "big kid" and his real Tonka toys !!!!!
Well done Andrew ! Back to your usual high standard. Appreciate the work you put into mixing GoPro and Drone shots with music and change of angles. A lot of time involved putting all of that together but that's what makes your vids stand out.
These videos are great and that seems like a hard job if you don't know what your doing
Andrew you should get some rock chains for the tires so they don’t get beat up. All the rock quarries seem to have them on their loaders so tires last longer.
35/65r33's those are the biggest tires ive installed haha! these guys make it look easy; that's a quality tire shop right there. awesome video Andrew, thanks for showing this. takes me back to my tire shop days (not that i miss it, that job literally broke me). they need a needle scaler for the rims haha! also, if it was me, i would have rotated the new ones to the front, as the fronts typically see WAY more abuse than the rears. in either case, im happy to see new tires on this beast haha! :P
So how come the rears were mullered and not the fronts?
@@sjv6598 that's a good question, and im not sure. Could be from spinning while trying to get a full bucket load. That's probably the only thing i could think of... none of the contracts were doing quite what Andrew does, they were mostly mills and stuff like that, not quarries
Andrew, the best thing about your videos is, when it's your own projects, you do whatever TF you want to do.
Hats off my man!
I use trickle solar chargers for the past 3 years on all my Trucks !! They work great! Some of my vehicles sit for 3 months and fire right up!!!
great job as always. looking forward to seeing how your new mountain property is doing as well. always enjoy watching your videos.
"anything is possible with a sledgehammer" -Andrew
When all else fails get a bigger hammer.
... and a chainsaw.🙄
Hammers, chainsaws and duct tape can achieve anything
@@logansylvester8093you forgot superglue
I think you definitely need to cut a car in half with the Ditch Witch ❤
I still remember the video of you getting that CL35 skid steer. You've come so far, pretty crazy seeing you progress.
One of the hardest working men I have seen. Earns his money.
When I first started watching UA-cam and looking for snowplows for trucks, Andrew's plowing snow was the first one I watched, and I have been hooked ever since.
Awesome video Andrew! Your work with the wheel loader is truly impressive and incredibly entertaining to watch. It's amazing how you single-handedly clear the property and make moving the earth look so effortless. Keep up the fantastic work!
I love these videos. I can't imagine how much work it takes just to keep all the equipment in running condition. It is clear to me that all your hard work has really paid off.
your videos are so full of excellent content andrew, you do what we boys dream of doing! keep it up.
Very cool video , watching him dig out the hillside rock you lose how big that machine is till he was running the bobcat next to it .Thanks for taking us along . B
Somehow so satisfying to watch somebody doing actual work, and getting results.
Andrew , You have more followers than the President .
Reminds me of that movie, Dave your quote reminds me of the movie Dave all right have a good one
We always used to C clamps
love the videos keep up the great work
Have you ever thought of using solar battery tenders for your heavy equipment?
He is to smart for global warming
We had to change a tire in VietNam on a BARC (Barge Amphibious Resupply Craft). I wish we had these tools. These guys are good.
Great job - you really made a ton of space out of that scraggly lot! And those tires - man, would've taken a whole rubber plantation just to make 2 of them; I shudder to think how much the new ones must've cost you..
12:44 EXACTLY why you film stuff, so you can say later 'I told you to go up, not into the glass!" 😆
I was looking for this comment, I thought the same thing and cringed when that canopy smashed that back glass
Andrew is finally back making great castle property videos. Happy to see the effort and hard work he put into this video. great stuff.
Any day with a post from Andrew is a good day! Curious - he has over a million subs, but lives in the county with a lot of land, old timers and seems to keep to himself and isn't flashy with dumb cars and shit. I wonder if he gets recognized in his "town" much lol.
I am actually surprised that New York state allows all that stuff, given that it contains NYC and all the city politics...
@@dyer2cycle Most of New York state is actually vastly different from NYC/Manhattan
@@JJ-yn8fl Yes, it doesn't look too terribly different from where I live, Central North Ga., not far from the TN/NC line, not far from SC either..what is happening here, though, is the urban sprawl from Atlanta is spreading out, creeping in like a cancer, invading our mountains, and consuming the beautiful farmland further south..I was afraid as big as NYC is, it was doing that to the rest of NY state, as well
@@dyer2cycle I hope not. Andrew's area of the state is beautiful. Love all those trees and cliffs!
@@JJ-yn8fl Yes, it is beautiful!
Ditch Witch 6510. I was the illustrator that created the art for the operation and parts manual. I enjoyed working for Ditch Which. I didn't care much for the area though.
That is cool
boy does this bring back memories, I did OTR tires for a company out of Lancaster California 23 years ago I've done tires on everything from 613s to 666 scrapers, motor graders, and wheel loaders from 992s down to 906s even 825 rubber-tired dozers, I even had a 350lb 14.00-24 motor grader tire fall on me once. the good old days, LOL
What are your plans for the old international? I would love to try restoring it a little.
Hey Andrew.. any idea how much those new tires you put on the back of your loader weigh a piece? Just curious 😉
I priced out new tires for a Hough loader I have which is about the same size as the 988 - over a ton and nearly $10K EACH!!! Decided to stick with the old ones. However, I needed to have the bead seal replaced on one, took the mobile guy nearly two hours and cost just shy of a grand.
Did you ever consider some solar trickle chargers for your fleet?
Yeah, I was doing that for a while, they just seemed to kill the battery faster
@@AndrewCamarata lol ok never mind. Maybe you should consider becoming a interstate battery distributor.
Them putting the boom against the center of the hub while airing the tire up is a sign that they know not just what they are doing but that it is dangerous. Using the boom as a safety should the ring pop out, Bravo guys. Bravo.
That trick was likely written in blood.
Such a dangerous job changing tires on those. My uncle worked for CAT out of Illinois. I remember playing in the new ones they had lying around the shop.
Barnwell CT making it to the big time now. I used to do off road tires for barnwell on long island. Those 29.5x25 tires are not joke.