How to Adjust Clinical Settings - AirSense 10
Вставка
- Опубліковано 23 сер 2024
- This video is for clinical adjustment of the AirSense 10 CPAP. We over how to access the settings and what each of them mean. The links below will help you get started with everything else related to the AirSense 10 CPAP.
AirSense 10 Link:
cpapmyway.com/...
Thank you for your comprehensive video. It was extremely helpful for me and my wife. Sometimes it takes a while to get to the provider, but with this, the provider can give you the parameters you need. Sleep doctors and staff don't make house calls.
Glad it was helpful!
Thank you this was very helpful turning auto on.
Nice. Glad we could help.
Excellent explanation and assistance 🎉🎉🎉🎉
Thank you.
Great video! I had to laugh though at "most people use Fahrenheit unless you're overseas" - my friend, the whole world including the rest of North America uses Celsius, even your neighbours to the North and South 😊🇨🇦.
HAHA! We do everything weird here. Keep us unique.
Awesome, thank you.
Welcome!
I see that there is a way to do it, but you were moving a little bit too fast for me… But I do appreciate everything you’re doing
You are very welcome.
Great video thank you
You are welcome
Under reminders, setting the filter for 3 months would be useful for most.
Thanks for the input.
I just changed my turbine motor and I would like to learn how to reset the message so it doesn't come on anymore
Have you tried returning to factory settings?
Really helpful
Glad to hear that
I have a question when I take my nose piece off to go to the restroom during the night shouldn’t it stop blowing out air… I can’t figure out how to make it shut off while I’m in the restroom. Is that a possibility? Does anybody know?? Thank you.
You can press the button on top to stop it while you go to the bathroom.
Do you know how to resset mensage " Motor life expired " ? . Tks. Excelent video.
That usually is not just a message. My understanding is that it is a warning that the motor is not longer doing what it should. Time to replace typically.
cpapmyway.com/store/cpap-machines/auto-cpap-machines/resmed-airsense-10-autoset-cpap-1
Thanks for the videos. It looks like the AirSense 10 has an option for AutoOn but not AutoOff. Is that correct?
Correct.
How do I find humidifier? My water is not being used and I need it. I see climate control it’s in auto my heating tube is on 80 degrees. I hope I didn’t mess something up than you
You have to change the humidity from Auto to manual.
I've been waking up most mornings feeling dizzy, my cpap was set on 8.4,could ramping up the pressure help stopping the dizziness
That would be a question for your Dr. I'm sure the answer would vary from person to person.
If 8.4 is the high pressure. That is way too low. I just talked to a friend yesterday, who had the pressure too low. she waked up dizzy and short of breath and was tired all day. The pressure was set higher and she is much better now
I don’t see your link to learn about EPR please help
Here is the link to exhalation relief.
cpapmyway.com/blog/cpap-exhalation-relief-setting
How to take out your Sim card
You press it gently and it will release to pull the rest of the way out.
Excellent content....but way too fast!!
Sorry about that. Thanks for watching. I think you can slow the speed down in your settings.
take photos of settings before you adjust
Great input.
Thanks for the very valuable information. But, you talk so fast, and push the buttons so fast you're leaving us old people in the dust! I watched it 3 times though and I will run it again when I get busy trying to adjust my machine. When I first got the machine the blast of air blew the mask right up off my face!, believe it or not. And it dries me out terribly and runs out of water. I am going to experiment with the settings to see if I can improve it. I don't have another person who knows anything about it. Thanks again.
You are welcome. Always a tough balance on the speed thing. Thanks for watching.
One option is to slow down the video by selecting 0.75 speed at the bottom of video
@@supriyasou3722 - Oh. I did not know that. Thank you.
Same here
@@supriyasou3722 - Yes, I just did that. It's under "settings" pictured as a little wheel. It was very easy, I don't know why I didn't notice that before. Thanks again.
talking too fast
Sorry about that.
You can slow it down.
That’s what the video speed adjustment is for….
Talking too fast and clicking too fast - worse as the video ran
You might can slow the speed on the video down a bit. Sorry about the speed.
Hard to believe people are taking your """" advice """ .
Thanks for the input.