Hi Crystal I just have a regular dryer, I made a cleaning tool from a paper towel tube just bend it flat on the end then duct tape the other end to a vacuum cleaner Your video was excellent.
That’s a great idea. I actually do have some, but have always refrained from the extra step. This is seriously annoying though, so I might need to train the kids to make that happen. Thanks for the tip!
Yeah I have two kids and their little socks will get stuck in the gasket area if I don't put them in a bag. Thankfully it's usually just one sock but yeah that happens.
That’s what we do! In fact, we have a mesh bag on a peg by where the shoes are kept and anyone with lilliputian feet puts their socks in there when they come home at the end of the day. Once it’s full enough (but not too full), the bag gets zipped up and goes into the hamper and another is hung. This technique has the added bonus of doing a great job at keeping small socks from getting lost.
I have a small shop vac with a 2 foot wand extension I bought from Amazon to reach inside the filter section. Pain free cleaning. I clean after every wash, looks new.
I bought some 2 x 4 pieces of wood along with a small piece of 3/4" plywood and I made a stand for my machine. I painted it to match the color of my machine and it works great. Cost me less than $100 for the material and it allows me to clean the front lower filter very easily. I put an old Tupperware container underneath the filter opening to catch the water that comes out. Super easy process....
I can only imagine how many customers you visit who,have never maintained any of their hardworking appliances. She does an amazing job of taking care of her machine. Ill bet she treats her car the same way 😀
I've done 24 washes. I wish I had ordered a regular washer and dryer. This combo machine has been a pain in the....I would NEVER recommend it to anyone.
I have all GE appliances…the basic non fancy models. LOVE all of them…that said GE is ridiculous for not including those necessary brushes with the purchase of the machine. Thank you for the thorough review! I’d love to try this unit in my upcoming tiny home purchase.
This is the best explanation for the use of this machine that I have seen. I wish the salesman that sold it to me had been as thorough. I never would have bought this machine. As a 72 year old with bad knees, the last thing I need is to get down on the floor to clean a filter, not to mention trying to get back up. Now I’m stuck with it until I die.
I’m so sorry that you weren’t fully aware of the process. I doubt the salesman even knew, which is also unfortunate. On the note about getting up and down, I used to teach chair yoga and had a lot of older clients. Keep a chair close to you, and use it to get yourself up. Also consider that this skill needs to be worked on, even if it’s scary or uncomfortable. If you were to fall, which a few of my clients did, at home alone, being confident in your ability to help yourself up is a huge help. I’m sure you can find chair yoga content on YT. The movement is very gentle, and modified for ages and ability. You might also consider buying a thick mat for under your knees when cleaning the machine for extra cushion when getting up. I’m cheering you on from my corner of the world, and I hope you can figure out an effective way to have this machine work for you. 💕
Yeah that is a bummer. Most front loading washing machines I have had over the years have the front filter you need to clean. Currently we have a top loader and the maintenance is a lot less than the previous front loaders.
Have same issues on our 2 units. They should have made this area easy to access with a panel on top. I recommend NOT reinstalling the filter, take it out after each load and clear it and leave it on top of the washer hard side down, rubber gasket side up so the duct can air dry as moisture builds up in there.
We love our All In One so far. I do think GE should reengineer the filter and access to the lint left in the machine. I really love the convenience of this machine.
Truly helpful video! I have a suggestion regarding clearing the water collected from the filter at the bottom. I use one of those extra-large, yellow sponges which soaks up most of the water from the tray. Once the water soaks into the sponge, simply lift your tray (now mostly dry) with the sponge in it to your sink and squeeze the sponge! Easy peezy!! Thanks again for your clear, uncomplicated review. It's nice to listen to a video where the speaker talks easily without a lot (or any) "ums", "uhs", or "you knows"!! Great job!
I don't get it. I'm a guy that designs and builds things, and I just don't understand why anything gets past the filter. If the filter fit properly and perhaps had a silicone seal, then NOTHING should get past it. Cars have had filters that seal perfectly for a hundred years. What's the problem?
Some gets past the filter. I do think the seal is not properly designed. Additionally, a huge amount piles up and stays deep down in the machine before the filter.
I’ve been watching reviews for this machine and I must say you do an amazing job of explaining everything. From one video I saw they said to put electrical tape (or other high temp tape) on the cracks of the black filter housing. They said it helped prevent the lint from escaping and getting on the coils.
Thank you! Yes, my husband sent me that link. I have reservations about electrical tape causing stickiness. Perhaps it won’t, but I’m going to try following my routine of brushing when the filters need cleaned, and see how it goes, for now. Thank you for the kind words, and thank you for watching! I actually just put a 1 year review on my calendar for the fall, so more to come as I keep trying things to see what works!
Thanks for posting the brushes. I’ve had my combo for almost a year now and just now having the lint problem but there are only 2 of us. I also clean my filter after all of our wash is done and leave it out to air dry. I love this washer. It has maintenance, but has worked awesome for us.
I'd totally try to shortcut by sticking the crevice attachment on my Vacuum into the lint compartment suck up that lint (Of course being careful not to damage anything by jamming it around obviously). Then I'd pull out my brush for the finishing touch followed by the vacuum again to suck up anything that got loose. My vacuum is pretty powerful. And while I don't have this model, I definitely started enploying the vacuum to suck out the lint... I just did a MAJOR clean out on my dryer's lint duct because i had to replace the belt anyways- Im pretty sure now that im starting fresh with no buildup, utilizing the vacuum trick will keep it much cleaner for me.
I started my journey with this machine using an old Fuller brush designed to remove lint from a dryer. Was not long enough. I evolved to using a vacuum with an adaptor to vacuum a computer that had a long enough tube to reach the back. Had to reinforce the tube with some wire. When I take out the filter I have a crevasse tool in and suck up any lint on the edges while pulling it out. Then wipe the white side with it to get the bigger lint. Stick the tool in to suck up what it can. Check for build up with flashlight. If needed. plug in the computer attachment and go at it. Then clean up anything on the floor that snuck by. Airflow is important to heat pump efficiency. Hope you find a routine that works for you. I too have found using wrinkle care aids in perfect drying.
You’re welcome! For some the cleaning is a deal breaker. For me, forgetting the laundry in the washer was way more common than the occasional cleaning. 🥴 Thanks for watching!
I'm sorry but for the price demanded for this machine, the lint build up issue should be resolved in a better filter and casing design or self service solution. The same goes for the annoying bottom drainage filter.
The bottom drainage filter is similar to many front load machines. The only major problem with the servicing is getting something shallow enough to not leak under the machine if you don’t have the riser. I do think they will upgrade the filter systems on future models.
Fabulous to hear! When I used them the first time, I couldn’t believe they weren’t part of the set. Glad I could help, and good luck with your machine!
I just received this machine today and am so glad I found your videos. I ordered the brushes and silicone pet mat off your links. Thank you so much for sharing 😊
I have the pedalstol for it which helps for cleaning. I also bought brushes and a hose to put on the vacuum to clean inside. Didnt know they offered brushes from the manufacturer.
Thanks for the update. I have watched all the videos you have posted so far on this GE washer/dryer combo and can’t wait to purchase my very own. I’m thinking could you use a Norwex microfiber wand to get back into the filter crevices so it wouldn’t be landing on the floor and the envirocloth to soak up the excess water to save on paper towels and keep your cork floor dry. Totally agree on using a bag to keep the socks together. I l have a Norwex house and noticed you have the mop system and are familiar with the products. Im hoping that Norwex will help me with the issues you’re currently experiencing.
The wand is a fabulous idea but I wanted to try their brushes for the flexibility. I have a stack of Norwex, but no wand yet. 🤷♀️ Glad you’re planning to get one, and I hope it works out perfectly for you. With the proper maintenance routine, it’s a lifesaver for our family! Thanks for watching!
I love the wand and it’s really versatile which I why I was wondering how that would work. I’m definitely going to try it out when I get the machine. It will be a while because we are redoing the laundry nook! Thanks for sharing your experience!1
I agree that they ought to include the brushes with the machine. We clean the screen filter every load, the foam filter every notification, and brush the cooling fins weekly, with a brush I got from Lowes. We are a family of 7, 5 kids ranging from middle school to pre-k.
Heard from CES that in April another download cycle will be a pet cycle that will use the powerful fan to blow pet hair from the clothes before the wash cycle begins.
In my search for the best all-in-one machine for my family, I was glad to hear you include a review of the wrinkle free feature and tips on cleaning the filters. Thank you.
When I first got my units at launch I read the manual and noticed they recommended brushes but I didn't want to wait for shipping. So I got one locally which was similar to the one with a wooden handle that you got. I always wanted the other one because I could more easily get different parts and clean it really good. However, I do have a couple suggestions since I watched you clean the coils and you're commenting how they were moist. It's a good idea every once in awhile, especially before you clean to pull the filter out and just lit all the moist air leave the upper part of unit. Also, it's usually best practice to leave the door cracked a bit after a load, so that way all the humidity can leave if you don't plan on doing another load right away. This will help keep down the moisture in the filter area so that way when you're cleaning it, it won't be a wet massive lint and the lint will more easily come off the fins. Also, one more suggestion, the bend. The appliance guy UA-cam channel has a pretty good suggestion for our filter where we can fill the crannies between the secondary filter with either electrical tape or a bead of silicone between the snaps so that way there is a better seal. I love it when people actually talk about their experience and how the units change their lives because this has definitely changed my life. I haven't had a laundry machine in a long time, but I remember how awful it was transitioning laundry and even though this unit needs a little bit more cleaning or should I say if you don't clean it, it will stop working very quickly.. Far supposed to be cleaning their dryers and washers anyway and they don't do it and eventually they die. So this unit is just making us clean it more regularly but saving us time by not having to transfer laundry. So it really annoys me when people complain about cleaning because if you keep up on it and you do it maybe every 50 cycles or less it doesn't build up that much and it only takes a couple minutes to get with a brush. Or if you have a really small vacuum you can get in there really good too. Yeah, one more tip, I saw you going in and out with a brush while holding the handle at an angle so it'd be pushing pressure against the fins. I'd suggest you not do that anymore and instead if you let us, there's usually a plastic sheath around the metal. You can then turn the handle to make the bristles go up and down the fins. Because if you're pulling in and out while putting pressure against the fins, you have a possibility of damaging the fins or bending them which will impede airflow so ever slightly. And this machine screams because it's an airflow beast. Also excuse any typos above and the length of this message. But I just wanted to leave my comment here. Like I said earlier, I've had this unit since launch last year and I really love it.
I have this LG profile washer dryer combo and I absolutely love it! It’s very convenient for me now that I’m older. This is the best video out there as far as I’m concerned thank you so much for taking the time to show us how to maintain our machines for longer use and safety !! Much much appreciated !!
Wow. That’s quite a bit of maintenance for that machine. Seems GE would tweet that. We recently bought a new set and I looked at this GE unit because our home is very small and I felt I could capture the space the second unit would take up. Ended up with a traditional set. Still like the concept of the single unit.
I would assume traditional units are full of lint, including the vent out of the house. This is just all contained in the unit. I actually have a friend who almost lost her house due to a fire from lint, that said, they should send the dang brushes, AT THE MINIMUM, with the machine.
@@thehometownhomestead we check the dryer vent because I’ve heard of that happening too. Very sad. Yes. They should send the tools and instructions on how to. Or link your video.
The issue is that back track not being clean creates blow by. If there is build up the filter tray cannot seat/properly. I use a vacuum kit I purchases from amazon, it will reach all the back there. I still really like the machine but that filter set up is an over site on GEs part. Also, im still having issues with balancing but I thick it is because the base is not sturdy enough, I’m going build my and replace the GE base.
I have this combo, and love it but you have to take care of it (which you do a good job showing all of the things you need to do). You can't slack on it either. Did the electrical tape trick as well, which is definitely a fault on GE's part and they should definitely release a new revision of the filter tray. But if you do keep up on it, the machine is fantastic. It has saved plenty on my energy bill. I only wash a load once, it gets them clean and the drying process is much more gentile on my clothes.
Ours ended up dying. 🥴 Hopefully yours lasts for you, because even cleaning very often lead to a critical compressor breakdown. Keep on it, and I hope they eventually get it right, because the idea is fantastic.
Great video! Your other videos on this machine helped us decide to buy it. So far, I love it. I tried a vacuum cleaner attachment from Amazon to try to get deep into the filter slot, but it didn't reach. Am ordering the brushes you recommend now.
This explanation was wonderful. I ordered the brushes immediately. I had already noticed the problem myself. When I stuck a flashlight in there I was shocked, and I noticed that it wasn’t drying as dry as the beginning. I’ve had mine about four months, but mine is shaking like crazy at the beginning of the cycle Every time I’m not sure what to call the people that lowes back or somebody else for that ? Anybody else have that problem with shaking?
Great video, I had a tech out 2 times for drying issues, they said I should use the more water feature. I will try the wrinkle care option, overall I am not that happy with this machine.
I didn’t even know there were brushes for this machine! I have used my Swiffer duster as well as a long handled bottle brush to clean the lint compartment.
I am having the same issues. I had the tech here today and he had no answers. My lint trap is growing black mold on the rubber pieces. So therefore I run and take lint trap out right after the machine is done. Why is there so much lint? And why isn’t the lint trap collecting more. This is just too much work.
I’m stuck between this machine and the Samsung. If you could go back would you repurchase this machine? It wasn’t clear, do you clean the lint filer after every use and still get all the lint you show cleaning with the brushes ? Thank you in advance and thank you for your personal experience with this machine. I greatly appreciate this video
Here is my update and recommendation. I wouldn’t recommend a Samsung ever. We’ve had terrible luck with their appliances, and our appliance store won’t ever carry them because of the lack of longevity in their appliances. Why You Should Avoid Purchasing a GE Combo Washer Dryer - Failures Revealed ua-cam.com/video/tvT6_l_hPjs/v-deo.html
With the price of this machine in Canada at over $3299 + taxes they really should include the cleaning kit essentials. Thanks for this video. I can across this machine while shopping for a dryer I need to replace in our rental property but I'm now concerned that the renter won't do what you showed in this video. But I really want to get this one. Thanks and Be well.
The bissel little green machine would help clean your floors and carpet and suck up the water on that mat. The shark vacuum has two different attachments. One for under the appliances and small wand with creaves and brush that might work well in there
Mine quit too, and I was on schedule with the cleaning. We cleaned the bottom drain AGAIN, and about 3 gallons of water spilled out on my floor as a result of a massive clog. (Cleaning way more than recommended.) Once that was cleared, it dries well again. Grab some towels and be ready. It was one of those moments that was shocking. Hope this “fixes” your issue. We were back in business after mopping up the floor.
Not sure if I have a different gasket than you but I've had the GE All-in-One Combo machine for almost a year now and I've never had a sock or small item get caught in that gasket.
so I have had mine for over a year. I thought it was amazing at first. I recommended it to a friend that has a 6 person household. He has had a technical come out 3 times to fix errors with it. When this first came out and everyone said this was new tech and they would wait for the results was right too. I fell for people saying there has been combos in other countries for many years. The fact the lint gets like that in the machine should be a class action lawsuit on them. I cant believe there isnt a fix besides buy brushes from them that doesnt come with the machine. Ive seen online were a guy used tape or silicone to see the edges of his filter to have better results. Seems like a shear money grab for GE kinda like the samsung refrigerator issue. The easy of setting and forgetting is nice. I just feel like it is on borrowed time. Ive only had a tech out once for it. I miss the days of top loaders just running forever lol. End of rant
I just use a large beach towel under the bottom filter, soaks up the water and I just throw in the wash - I have a regular front load HE washer, not a all-in-one, and didn't realize that so many people didn't know they had to clean the filter in their washers (it's in the directions)! I do it about every 2-3 months but I also have large double coat dogs so it isn't something I can just ignore. I have even found a dime in it! When we had littles I always washed the little socks in a lingerie bag or a mesh laundry bag, they get just as clean but don't get stuck in the seal which I have had happen with regular front load washers too.
Because this machine does wash and dry, the filter is critical. It won’t pump out water in the wash or dry cycles if it gets clogged. I cleaned mine monthly, and that wasn’t enough. But yes! It’s in the manual for sure. Reading the directions provides valuable info! Thanks for watching!
I love your videos, thanks! My combo unit arrives today. I wanted to tell you that I ordered the pet tray from your link, with no issue. However, when I tried to order the GE brush set from your link, it popped up and said not available. ....thought you would want to know that if you weren't aware. Thanks again!
Thanks for the information! I’ll see if I can track down another link. Several have been ordered, so they are probably wondering why the uptick on orders recently! Once it get a good link, I’ll add it in for you. Having these from the beginning will be a HUGE asset!
If uou use lots of liquid detergent amd cold cycles make sire once every 3 months to do an empty cycle on the hottest setting with 2 tabd of dish detergent following by another cycle with 2 cups of citric acid
Thank you for the video. Have you checked any fault codes? I started to get the 353-fault code. Called GE and they had to send out a GE certified technician. They had to replace a part. It took the technician about 4-5 hours. The technician ran the machine to get it to reset. After it finished, I got the fault code 354. We ran a small load of laundry and now will not go into drying mode and giving the error code 353. I cleared the fault code and tried to run another small load. Again, stopped after the washing of the clothes. Would not go to drying and fault code 354. Now we have a really expensive washing machine.
I would buy again, but with one caveat for anyone shopping. If you aren’t going to do the maintenance, you will have issues. 1. Use the lint brushes. 2. Clean the lower filter monthly. Would I buy the LG? No. I have a great appliance man, plus our own personal experience saying to never buy LG or Samsung appliances because they’re constantly in need of repair and replacement. We’ve had both last just over 5 years, never longer. If I were to buy something else, it would be the Speed Queen set.
Hi There! This was a great and thorough review for cleaning. I noticed you use Puracy laundry detergent and I wondered if you found a way to change the autodispense amounts on the machine. I found that my detergent requires less than the usual brands listed on the menu. Also, how do you like to clean the rubber seal inside the door? Thanks!
Great machine. Sips electricity. Doesn't need a vent (no hot air pumping out the house). Frees up a slot in the circuit breaker. Frees up space in the laundry room. Just clean out the lint trap every load, pull out the filter so it drys first. We keep a vaccum in the laundry room to suck it out. I've never seen the amount of lint you show in the video, even after my college kid comes home with a mountain of laundry. To save more electricity, use a clothes line.
Just ordered the brushes and a vacuum hose attachment. This is the one area that GE missed the mark. The filter allows lint to get through gaps around the filter assembly. For those that were turned off by the lint cleaning, remember you have to keep up on the lint in a normal dryer too. At leat here the lint build up is in one place. I am a widower and this has made my laundry chore a lot easier. Other than the lint thing this machine is amazing. Anyone considering replacing their washer and dryer should consider this or one of the other combo from LG. If you live off the grid, the energy savings alone are worth the extra care. An average load uses about 1KW to wash and dry compared to 4KW for an electric dryer.
I actually agree with you. This machine is forcing us to take care of lint, while older machines allowed up to feel like we completed the job by wiping off the filter. In reality, that was not the entirely of the job, because vent hoses were often full of it, beyond what we could see. I’m glad you’re happy with your machine! We definitely appreciate the ease of use around here too!
The lint gets a bit wet and is slightly stuck to the blue fins. A bit of agitation with the brushes was helpful. The vac would do well on the dry stuff though. I think both could be useful.
Hi Jill, thanks for the great vlog explaining in great deal your thoughts & opinions. I am thinking of buying this combo unit for my rental duplex apt building. I look forward to your next vlog and thanks again for your time and effort. From the capital city of 🇨🇦 😊
A LandLeech buying a heat pump dryer?!? Must be you who's on the hook for the utilities! Guarantee if the poor tenant were paying the utilities, you'd provide the cheapest-for-you-to-buy but LEAST efficient option. RENT IS THEFT. IMPRISON ALL LANDLEECHES.
this lint issue was my greatest fear about this machine, but i bought it anyway. we've only run like 50 loads and have half the family size, but this stuff can both compromise the heat pump system as well as promote mold. not great.
Stay tuned for my update at 2 pm today. before you finalize your purchase! You can use the feet to level it, but the pedestal will make it easier to drain the pump.
I just got the machine yesterday with the 7 inch pedistal. How loud is your machine when it spins? Mine was installed by Lowes and it sounds squeeky. Im not sure if its from the drum moving or from where the pedistal attaches to the machine. But its at least 10 times louder than the washer it replaced.
Mine isn’t that loud. My guess is that it’s your pedestal. You’re inspiring me to check the volume in my next update. We definitely don’t have squeaking.
Here is the latest update, and it will show you exactly what I recommend at this point. Why You Should Avoid Purchasing a GE Combo Washer Dryer - Failures Revealed ua-cam.com/video/tvT6_l_hPjs/v-deo.html Thanks for watching, and let me know if you have any extra question!
Is that a design flaw? Is GE taking steps to fix that? 🤔 My husband and I was discussing purchasing this machine because we have such a small laundry and pantry area it just makes sense for us to buy an all in one. For you, what made you buy this machine for your large family? And does having an all in one work for your family time-wise?
@@micheledeanda4854 it worked well, until it threw a “critical error” and quit. They need to fix this before I would recommend buying. There are workarounds with weather stripping and such, but I don’t think it’s ready to go until this is fixed. We ended up with a Speed Queen set. No regrets.
No, absolutely not. Our regular dryer had way more lint on the filters than this one does. I’d say it’s closer to 1/5 the lint in one cycle. I think this machine just forces you to deal with it instead of filling up a dryer vent hose that you can’t physically see. We used to have lint stint visible on the outside of our house at the vent exit, even with cleaning the hose. This isn’t even close.
Wow this is crazy- I never knew ge made brushes for this I was actually told not to use any brushes because it could damage the computer inside and here I find the company themselves obviously says yes if they make them for it. so my machine worked for a week. It was great and then all of a sudden the power button started blinking and the screen said GE profile. that’s all it would do and after a ge tech came out after two weeks he said he was gonna order some parts and tht was two months ago cause apparently they were back ordered. I haven’t been able to do laundry for months I’ve lost numerous things that couldn’t be saved cause I have a lot of rescue animals which is why I invested in such an expensive washer combo in the first place. From start to finish I feel like I’ve gotten a terrible run around from lowes and ge. I loved it the week it worked but I feel like it’s the worst 3000 bucks I ever spent.😢 I really hope they fix it like they said and I can love it again cause I see nothing but great reviews on it guess I just got the dud😂
Oh no! That sounds terrible!!! Without some sort of extension cleaning brushes, this thing gets DISGUSTING. GE did make these brushes before the release of this machine for other cleaning, I believe. Thats said, this thing won’t last long if it isn’t cleaned. Hopefully yours is up and working again soon!
This machine is supposed to be ADA compliant. Researching the combo from the A.D.A. perspective, is this cleaning something could do from a wheelchair or with one hand? My main concern is the drain filter. Getting down on the floor and back up is a issue.
No. Absolutely not. Firstly, that drain filter needs cleaned monthly, regardless of what the directions say. If it gets clogged, it can cause water to backup inside and will flood your floor. Had I been in a wheelchair, there is zero chance I could have managed it. (IF using the pedestal, that might change my opinion.) Secondly, you will probably have issues cleaning the inside of the filter shown here. It takes a lot of maneuvering to get a good view of what’s going on. Lastly, mine is currently broken down. “Critical compressor error,” and the part is on a SIX WEEK back order. We are currently 10 days into no laundry at home. I will have an update coming soon on how this pans out, as we are waiting on GE to decide what’s next. At this moment, I would not recommend. They do not have the parts available for repair, and THAT is a huge problem for anyone looking at this machine, ADA or not. 🥴
Sorry yours is broken. I contacted GE about the drain filter. Their suggestions, buy the riser, have a friend do it for me or schedule a service call. Service calls once a month would get expensive quickly. Not sure what I'm going to do.
Set the “Wrinkle Care” option and let it run for an extra 5 to 10 min. Option 2 is to set the Wash Complete and pull stuff out and fluff it if it’s twisted up. Usually it isn’t not over full this isn’t needed.
Hi Crystal
I just have a regular dryer, I made a cleaning tool from a paper towel tube just bend it flat on the end then duct tape the other end to a vacuum cleaner
Your video was excellent.
Try using a lingerie bag for the little socks. It helps to not have so many lost socks
That’s a great idea. I actually do have some, but have always refrained from the extra step. This is seriously annoying though, so I might need to train the kids to make that happen.
Thanks for the tip!
It’s a good idea, but it does affect how the socks get cleaned. It doesn’t work as well in terms of cleaning
@Ikey04-ge9gy I don't see how unless it is being really packed. Can you elaborate, please?
Yeah I have two kids and their little socks will get stuck in the gasket area if I don't put them in a bag. Thankfully it's usually just one sock but yeah that happens.
That’s what we do! In fact, we have a mesh bag on a peg by where the shoes are kept and anyone with lilliputian feet puts their socks in there when they come home at the end of the day. Once it’s full enough (but not too full), the bag gets zipped up and goes into the hamper and another is hung. This technique has the added bonus of doing a great job at keeping small socks from getting lost.
I have a small shop vac with a 2 foot wand extension I bought from Amazon to reach inside the filter section. Pain free cleaning. I clean after every wash, looks new.
Yes our rainbow has this too
Please, share the brand *name of that vacuum cleaner with the 2 foot Wand extention* or share the link from Amazon.
Thanks❤
I bought some 2 x 4 pieces of wood along with a small piece of 3/4" plywood and I made a stand for my machine. I painted it to match the color of my machine and it works great. Cost me less than $100 for the material and it allows me to clean the front lower filter very easily. I put an old Tupperware container underneath the filter opening to catch the water that comes out. Super easy process....
I’m a service technician and you did a outstanding job explaining cause & effect.
Thank you! Hoping to save myself, as well as many others, some visits from you! 🙃
Enjoy your day, and thanks for watching!
I can only imagine how many customers you visit who,have never maintained any of their hardworking appliances. She does an amazing job of taking care of her machine. Ill bet she treats her car the same way 😀
I've done 24 washes. I wish I had ordered a regular washer and dryer. This combo machine has been a pain in the....I would NEVER recommend it to anyone.
Do you work on these GE 2 n 1's. If so, I now get a fault code 354
I have all GE appliances…the basic non fancy models. LOVE all of them…that said GE is ridiculous for not including those necessary brushes with the purchase of the machine. Thank you for the thorough review! I’d love to try this unit in my upcoming tiny home purchase.
This is the best explanation for the use of this machine that I have seen. I wish the salesman that sold it to me had been as thorough. I never would have bought this machine. As a 72 year old with bad knees, the last thing I need is to get down on the floor to clean a filter, not to mention trying to get back up. Now I’m stuck with it until I die.
I’m so sorry that you weren’t fully aware of the process. I doubt the salesman even knew, which is also unfortunate.
On the note about getting up and down, I used to teach chair yoga and had a lot of older clients. Keep a chair close to you, and use it to get yourself up. Also consider that this skill needs to be worked on, even if it’s scary or uncomfortable. If you were to fall, which a few of my clients did, at home alone, being confident in your ability to help yourself up is a huge help. I’m sure you can find chair yoga content on YT. The movement is very gentle, and modified for ages and ability.
You might also consider buying a thick mat for under your knees when cleaning the machine for extra cushion when getting up.
I’m cheering you on from my corner of the world, and I hope you can figure out an effective way to have this machine work for you. 💕
Yeah that is a bummer. Most front loading washing machines I have had over the years have the front filter you need to clean. Currently we have a top loader and the maintenance is a lot less than the previous front loaders.
I returned mine with a promise to still buy from hen. I just got a less expensive front loading stackable with vent.
Have same issues on our 2 units. They should have made this area easy to access with a panel on top. I recommend NOT reinstalling the filter, take it out after each load and clear it and leave it on top of the washer hard side down, rubber gasket side up so the duct can air dry as moisture builds up in there.
We love our All In One so far. I do think GE should reengineer the filter and access to the lint left in the machine. I really love the convenience of this machine.
watched a lot of videos on this machine. this is the first time i'm hearing about this cleaning brush. thanks!
Truly helpful video! I have a suggestion regarding clearing the water collected from the filter at the bottom. I use one of those extra-large, yellow sponges which soaks up most of the water from the tray. Once the water soaks into the sponge, simply lift your tray (now mostly dry) with the sponge in it to your sink and squeeze the sponge! Easy peezy!! Thanks again for your clear, uncomplicated review. It's nice to listen to a video where the speaker talks easily without a lot (or any) "ums", "uhs", or "you knows"!! Great job!
Thank you! The next (and final) GE combo review will be up tomorrow around 2, so make sure to come back and find it!
I don't get it. I'm a guy that designs and builds things, and I just don't understand why anything gets past the filter. If the filter fit properly and perhaps had a silicone seal, then NOTHING should get past it. Cars have had filters that seal perfectly for a hundred years. What's the problem?
Some gets past the filter. I do think the seal is not properly designed. Additionally, a huge amount piles up and stays deep down in the machine before the filter.
I’ve been watching reviews for this machine and I must say you do an amazing job of explaining everything. From one video I saw they said to put electrical tape (or other high temp tape) on the cracks of the black filter housing. They said it helped prevent the lint from escaping and getting on the coils.
Thank you! Yes, my husband sent me that link. I have reservations about electrical tape causing stickiness. Perhaps it won’t, but I’m going to try following my routine of brushing when the filters need cleaned, and see how it goes, for now.
Thank you for the kind words, and thank you for watching! I actually just put a 1 year review on my calendar for the fall, so more to come as I keep trying things to see what works!
I use those brushes at well as a Milwaukee wet/dry with air-tip extensions. Works perfectly.
Thanks for sharing!
This machine has a much higher maintenance schedule than I am willing to commit to. I'll stick to my separate machines. Thanks for all this info!
Yes, the maintenance is quite extensive for sure! Glad this helped!
I have seen people put foam tape around the top and back of the filter casing and it has helped lint build up a lot.
Thanks for posting the brushes.
I’ve had my combo for almost a year now and just now having the lint problem but there are only 2 of us. I also clean my filter after all of our wash is done and leave it out to air dry.
I love this washer. It has maintenance, but has worked awesome for us.
The maintenance is doable. I love the concept, and I think they will perfect eventually!
Yea!! Finally. A lint brush that bends. After six months I too should be able to get the remaining lint out. Thank you, can't wait for them to arrive!
Glad I could help!
I use the brush vacuum and at the end i use viper coil cleaner to clean the inner coils leaves them super clean
I'd totally try to shortcut by sticking the crevice attachment on my Vacuum into the lint compartment suck up that lint (Of course being careful not to damage anything by jamming it around obviously). Then I'd pull out my brush for the finishing touch followed by the vacuum again to suck up anything that got loose. My vacuum is pretty powerful.
And while I don't have this model, I definitely started enploying the vacuum to suck out the lint... I just did a MAJOR clean out on my dryer's lint duct because i had to replace the belt anyways- Im pretty sure now that im starting fresh with no buildup, utilizing the vacuum trick will keep it much cleaner for me.
Thank-you for sharing your information. Now I can help maintain my Daughter's washer and dryer when I visit.
You are so welcome!
I started my journey with this machine using an old Fuller brush designed to remove lint from a dryer. Was not long enough. I evolved to using a vacuum with an adaptor to vacuum a computer that had a long enough tube to reach the back. Had to reinforce the tube with some wire. When I take out the filter I have a crevasse tool in and suck up any lint on the edges while pulling it out. Then wipe the white side with it to get the bigger lint. Stick the tool in to suck up what it can. Check for build up with flashlight. If needed. plug in the computer attachment and go at it. Then clean up anything on the floor that snuck by. Airflow is important to heat pump efficiency. Hope you find a routine that works for you. I too have found using wrinkle care aids in perfect drying.
Great tips! Thanks for sharing!
I have always been intrigued by the combo machines. Thank you for the review!
You’re welcome! For some the cleaning is a deal breaker. For me, forgetting the laundry in the washer was way more common than the occasional cleaning. 🥴
Thanks for watching!
Great video! It’s looks like normal maintenance as we should with all appliances etc.. great video 😊
I'm sorry but for the price demanded for this machine, the lint build up issue should be resolved in a better filter and casing design or self service solution. The same goes for the annoying bottom drainage filter.
The bottom drainage filter is similar to many front load machines. The only major problem with the servicing is getting something shallow enough to not leak under the machine if you don’t have the riser.
I do think they will upgrade the filter systems on future models.
I ordered the GE appliance brushes and a very happy with them after watching your video
Fabulous to hear! When I used them the first time, I couldn’t believe they weren’t part of the set.
Glad I could help, and good luck with your machine!
I just received this machine today and am so glad I found your videos. I ordered the brushes and silicone pet mat off your links. Thank you so much for sharing 😊
Hope you enjoy it!
I have the pedalstol for it which helps for cleaning. I also bought brushes and a hose to put on the vacuum to clean inside. Didnt know they offered brushes from the manufacturer.
Thanks for the update. I have watched all the videos you have posted so far on this GE washer/dryer combo and can’t wait to purchase my very own. I’m thinking could you use a Norwex microfiber wand to get back into the filter crevices so it wouldn’t be landing on the floor and the envirocloth to soak up the excess water to save on paper towels and keep your cork floor dry. Totally agree on using a bag to keep the socks together. I l have a Norwex house and noticed you have the mop system and are familiar with the products. Im hoping that Norwex will help me with the issues you’re currently experiencing.
The wand is a fabulous idea but I wanted to try their brushes for the flexibility.
I have a stack of Norwex, but no wand yet. 🤷♀️
Glad you’re planning to get one, and I hope it works out perfectly for you. With the proper maintenance routine, it’s a lifesaver for our family!
Thanks for watching!
I love the wand and it’s really versatile which I why I was wondering how that would work. I’m definitely going to try it out when I get the machine. It will be a while because we are redoing the laundry nook! Thanks for sharing your experience!1
Wow!!! Yes I saw other reviews that talked about the lint problem and clothes not drying properly.
Thank you as I'm considering one.
I agree that they ought to include the brushes with the machine.
We clean the screen filter every load, the foam filter every notification, and brush the cooling fins weekly, with a brush I got from Lowes.
We are a family of 7, 5 kids ranging from middle school to pre-k.
Heard from CES that in April another download cycle will be a pet cycle that will use the powerful fan to blow pet hair from the clothes before the wash cycle begins.
That’s awesome!
I use the air fluff cycle, then go back to the machine to start the normal cycle. It catches some pet hair that way.
In my search for the best all-in-one machine for my family, I was glad to hear you include a review of the wrinkle free feature and tips on cleaning the filters. Thank you.
Welcome! If you do make a purchase through Best Buy or Home Depot, please check out my links.
Good luck on your search, and thanks for watching!
When I first got my units at launch I read the manual and noticed they recommended brushes but I didn't want to wait for shipping. So I got one locally which was similar to the one with a wooden handle that you got.
I always wanted the other one because I could more easily get different parts and clean it really good.
However, I do have a couple suggestions since I watched you clean the coils and you're commenting how they were moist. It's a good idea every once in awhile, especially before you clean to pull the filter out and just lit all the moist air leave the upper part of unit. Also, it's usually best practice to leave the door cracked a bit after a load, so that way all the humidity can leave if you don't plan on doing another load right away.
This will help keep down the moisture in the filter area so that way when you're cleaning it, it won't be a wet massive lint and the lint will more easily come off the fins.
Also, one more suggestion, the bend. The appliance guy UA-cam channel has a pretty good suggestion for our filter where we can fill the crannies between the secondary filter with either electrical tape or a bead of silicone between the snaps so that way there is a better seal.
I love it when people actually talk about their experience and how the units change their lives because this has definitely changed my life. I haven't had a laundry machine in a long time, but I remember how awful it was transitioning laundry and even though this unit needs a little bit more cleaning or should I say if you don't clean it, it will stop working very quickly..
Far supposed to be cleaning their dryers and washers anyway and they don't do it and eventually they die. So this unit is just making us clean it more regularly but saving us time by not having to transfer laundry. So it really annoys me when people complain about cleaning because if you keep up on it and you do it maybe every 50 cycles or less it doesn't build up that much and it only takes a couple minutes to get with a brush. Or if you have a really small vacuum you can get in there really good too.
Yeah, one more tip, I saw you going in and out with a brush while holding the handle at an angle so it'd be pushing pressure against the fins. I'd suggest you not do that anymore and instead if you let us, there's usually a plastic sheath around the metal. You can then turn the handle to make the bristles go up and down the fins. Because if you're pulling in and out while putting pressure against the fins, you have a possibility of damaging the fins or bending them which will impede airflow so ever slightly. And this machine screams because it's an airflow beast.
Also excuse any typos above and the length of this message. But I just wanted to leave my comment here. Like I said earlier, I've had this unit since launch last year and I really love it.
Great advice! Thanks for sharing your experiences. I also agree on the maintenance. It isn’t “more” than a traditional pair, it’s just different. 👍
I have this LG profile washer dryer combo and I absolutely love it! It’s very convenient for me now that I’m older.
This is the best video out there as far as I’m concerned thank you so much for taking the time to show us how to maintain our machines for longer use and safety !!
Much much appreciated !!
Wow. That’s quite a bit of maintenance for that machine. Seems GE would tweet that. We recently bought a new set and I looked at this GE unit because our home is very small and I felt I could capture the space the second unit would take up. Ended up with a traditional set. Still like the concept of the single unit.
I would assume traditional units are full of lint, including the vent out of the house. This is just all contained in the unit. I actually have a friend who almost lost her house due to a fire from lint, that said, they should send the dang brushes, AT THE MINIMUM, with the machine.
@@thehometownhomestead we check the dryer vent because I’ve heard of that happening too. Very sad. Yes. They should send the tools and instructions on how to. Or link your video.
@@Mel-vu9ss I’d take that too. 😉
Thanks for watching, and I hope to see you back soon!
I used a large zip lock bag to drain the water from the filter at the bottom.
Thank you for your great tutorial on using those GE brushes. I had bought some other brushes that didn’t work. They were the wrong shape.
It’s a tricky space to handle, so the brushes were definitely key to making it happen!
I have been researching getting one of these but from what I have seen, I think I will just go for a conventional stackable washer and dryer.
Do you ever get lint and other crud build up around the blue microcar seal or under the edge of the drum?
@@04jenpark I did. I ended with a butter knife and a vacuum to try and suck that lint out. Needless to say, the maintenance list is long on this one.
The issue is that back track not being clean creates blow by. If there is build up the filter tray cannot seat/properly. I use a vacuum kit I purchases from amazon, it will reach all the back there. I still really like the machine but that filter set up is an over site on GEs part. Also, im still having issues with balancing but I thick it is because the base is not sturdy enough, I’m going build my and replace the GE base.
I have this combo, and love it but you have to take care of it (which you do a good job showing all of the things you need to do). You can't slack on it either. Did the electrical tape trick as well, which is definitely a fault on GE's part and they should definitely release a new revision of the filter tray. But if you do keep up on it, the machine is fantastic. It has saved plenty on my energy bill. I only wash a load once, it gets them clean and the drying process is much more gentile on my clothes.
Ours ended up dying. 🥴
Hopefully yours lasts for you, because even cleaning very often lead to a critical compressor breakdown.
Keep on it, and I hope they eventually get it right, because the idea is fantastic.
Great video! Your other videos on this machine helped us decide to buy it. So far, I love it. I tried a vacuum cleaner attachment from Amazon to try to get deep into the filter slot, but it didn't reach. Am ordering the brushes you recommend now.
So glad you’re loving it! It’s been a great extra set of hands for our crew.
Hope to see you back soon!
This explanation was wonderful. I ordered the brushes immediately. I had already noticed the problem myself. When I stuck a flashlight in there I was shocked, and I noticed that it wasn’t drying as dry as the beginning. I’ve had mine about four months, but mine is shaking like crazy at the beginning of the cycle Every time I’m not sure what to call the people that lowes back or somebody else for that ? Anybody else have that problem with shaking?
No shaking here, but perhaps the feet aren’t properly leveled? If that’s not it, I’d call for service.
Glad it helped!
Great video, I had a tech out 2 times for drying issues, they said I should use the more water feature. I will try the wrinkle care option, overall I am not that happy with this machine.
I didn’t even know there were brushes for this machine! I have used my Swiffer duster as well as a long handled bottle brush to clean the lint compartment.
I didn’t have great luck with the swiffer. Has it worked well for you?
I am having the same issues. I had the tech here today and he had no answers. My lint trap is growing black mold on the rubber pieces. So therefore I run and take lint trap out right after the machine is done. Why is there so much lint? And why isn’t the lint trap collecting more. This is just too much work.
Thanks for the tips! We get our machine in a few weeks.
I think you’ll be pleased! It’s a game-changer for the laundry routine!
You still got it, baby - I’d take you to dinner in a New York minute. Oh and good review, too, but I’m all in with Speed Queen.
I’m stuck between this machine and the Samsung. If you could go back would you repurchase this machine? It wasn’t clear, do you clean the lint filer after every use and still get all the lint you show cleaning with the brushes ? Thank you in advance and thank you for your personal experience with this machine. I greatly appreciate this video
Here is my update and recommendation. I wouldn’t recommend a Samsung ever. We’ve had terrible luck with their appliances, and our appliance store won’t ever carry them because of the lack of longevity in their appliances.
Why You Should Avoid Purchasing a GE Combo Washer Dryer - Failures Revealed
ua-cam.com/video/tvT6_l_hPjs/v-deo.html
With the price of this machine in Canada at over $3299 + taxes they really should include the cleaning kit essentials. Thanks for this video. I can across this machine while shopping for a dryer I need to replace in our rental property but I'm now concerned that the renter won't do what you showed in this video. But I really want to get this one. Thanks and Be well.
I wouldn’t go this route for a rental.
Glad it helped, and thanks for watching!
The bissel little green machine would help clean your floors and carpet and suck up the water on that mat.
The shark vacuum has two different attachments. One for under the appliances and small wand with creaves and brush that might work well in there
@@mastertech6302 that’s a great idea! Thanks for sharing!
Thank you! This solves a big problem.
I've been doing all the needed cleaning and mine stopped drying completely. Think the heat pump died but have to wait for service now. Fun times.
Mine quit too, and I was on schedule with the cleaning. We cleaned the bottom drain AGAIN, and about 3 gallons of water spilled out on my floor as a result of a massive clog. (Cleaning way more than recommended.)
Once that was cleared, it dries well again.
Grab some towels and be ready. It was one of those moments that was shocking.
Hope this “fixes” your issue. We were back in business after mopping up the floor.
Not sure if I have a different gasket than you but I've had the GE All-in-One Combo machine for almost a year now and I've never had a sock or small item get caught in that gasket.
Do you have little kids? The socks that most often got stuck were for the 2 year old, although mine also did on occasion.
so I have had mine for over a year. I thought it was amazing at first. I recommended it to a friend that has a 6 person household. He has had a technical come out 3 times to fix errors with it. When this first came out and everyone said this was new tech and they would wait for the results was right too. I fell for people saying there has been combos in other countries for many years. The fact the lint gets like that in the machine should be a class action lawsuit on them. I cant believe there isnt a fix besides buy brushes from them that doesnt come with the machine. Ive seen online were a guy used tape or silicone to see the edges of his filter to have better results. Seems like a shear money grab for GE kinda like the samsung refrigerator issue. The easy of setting and forgetting is nice. I just feel like it is on borrowed time. Ive only had a tech out once for it. I miss the days of top loaders just running forever lol. End of rant
This was a great review! Thanks for the helpful tips :D
I just use a large beach towel under the bottom filter, soaks up the water and I just throw in the wash - I have a regular front load HE washer, not a all-in-one, and didn't realize that so many people didn't know they had to clean the filter in their washers (it's in the directions)! I do it about every 2-3 months but I also have large double coat dogs so it isn't something I can just ignore. I have even found a dime in it! When we had littles I always washed the little socks in a lingerie bag or a mesh laundry bag, they get just as clean but don't get stuck in the seal which I have had happen with regular front load washers too.
Because this machine does wash and dry, the filter is critical. It won’t pump out water in the wash or dry cycles if it gets clogged. I cleaned mine monthly, and that wasn’t enough.
But yes! It’s in the manual for sure. Reading the directions provides valuable info!
Thanks for watching!
I love your videos, thanks! My combo unit arrives today. I wanted to tell you that I ordered the pet tray from your link, with no issue. However, when I tried to order the GE brush set from your link, it popped up and said not available. ....thought you would want to know that if you weren't aware. Thanks again!
Thanks for the information! I’ll see if I can track down another link. Several have been ordered, so they are probably wondering why the uptick on orders recently!
Once it get a good link, I’ll add it in for you. Having these from the beginning will be a HUGE asset!
Try this link! Thanks again for the info on the previous option!
amzn.to/3SGXDm2
If uou use lots of liquid detergent amd cold cycles make sire once every 3 months to do an empty cycle on the hottest setting with 2 tabd of dish detergent following by another cycle with 2 cups of citric acid
Very helpful…..I don’t think my laundry smells fresh…it smells musty. Ever experience this? I ordered the cleaning kit it will be very helpful
Mine never smelled musty, but our machine totally died on us after 9 months. I have an update out on the repair process. 🥴
Thank you for the video. Have you checked any fault codes? I started to get the 353-fault code. Called GE and they had to send out a GE certified technician. They had to replace a part. It took the technician about 4-5 hours. The technician ran the machine to get it to reset. After it finished, I got the fault code 354. We ran a small load of laundry and now will not go into drying mode and giving the error code 353. I cleared the fault code and tried to run another small load. Again, stopped after the washing of the clothes. Would not go to drying and fault code 354. Now we have a really expensive washing machine.
353 is overheating warning, but we never got to 354. Are you still under warranty? I’d call them back asap
I would use the shop vac for the purposes of removal of lint.
Hi! Two questions, the first I always answer when I purchase something. Would you buy it again? Then, if not, would you purchase the LG version?
I would buy again, but with one caveat for anyone shopping. If you aren’t going to do the maintenance, you will have issues.
1. Use the lint brushes.
2. Clean the lower filter monthly.
Would I buy the LG? No. I have a great appliance man, plus our own personal experience saying to never buy LG or Samsung appliances because they’re constantly in need of repair and replacement. We’ve had both last just over 5 years, never longer.
If I were to buy something else, it would be the Speed Queen set.
Is there a warning or advisory to not use a low power vac to in that filter chamber?
We ordered one yesterday. Cant wait to try it. ❤
Hope you like it!
Hi There! This was a great and thorough review for cleaning. I noticed you use Puracy laundry detergent and I wondered if you found a way to change the autodispense amounts on the machine. I found that my detergent requires less than the usual brands listed on the menu. Also, how do you like to clean the rubber seal inside the door? Thanks!
@@reneehelppie7735 I never found a way to make the smaller amounts work. Even on the lowest dosage, it still went though months of Puracy in 30 days.
Great machine. Sips electricity. Doesn't need a vent (no hot air pumping out the house). Frees up a slot in the circuit breaker. Frees up space in the laundry room. Just clean out the lint trap every load, pull out the filter so it drys first. We keep a vaccum in the laundry room to suck it out. I've never seen the amount of lint you show in the video, even after my college kid comes home with a mountain of laundry. To save more electricity, use a clothes line.
I’m sure the vacuum really helps to prevent the lint buildup.
Thanks for sharing!
Use a garment wash bag for small socks and items.
Just ordered the brushes and a vacuum hose attachment.
This is the one area that GE missed the mark. The filter allows lint to get through gaps around the filter assembly.
For those that were turned off by the lint cleaning, remember you have to keep up on the lint in a normal dryer too. At leat here the lint build up is in one place.
I am a widower and this has made my laundry chore a lot easier. Other than the lint thing this machine is amazing. Anyone considering replacing their washer and dryer should consider this or one of the other combo from LG.
If you live off the grid, the energy savings alone are worth the extra care. An average load uses about 1KW to wash and dry compared to 4KW for an electric dryer.
I actually agree with you. This machine is forcing us to take care of lint, while older machines allowed up to feel like we completed the job by wiping off the filter. In reality, that was not the entirely of the job, because vent hoses were often full of it, beyond what we could see.
I’m glad you’re happy with your machine! We definitely appreciate the ease of use around here too!
I use a garment bag to wash small things in
Always check cloths pockets for objects that can damage your machine.
What is the link to get these brushes ?
Here it is, and it’s also in the comments if you ever need to easily get back to it!
amzn.to/3UbhNGN (affiliate link)
Found it I'm a dork lol . I just got this machine today. I hope I love it 😅😅
@@daisymayla no problem at all! I think using these from the beginning will be a huge help.
Good luck!
Very informative! Great video!
Glad you enjoyed it!
Do you think the brushes are better than vacuuming out the lint?
The lint gets a bit wet and is slightly stuck to the blue fins. A bit of agitation with the brushes was helpful. The vac would do well on the dry stuff though. I think both could be useful.
Hi Jill, thanks for the great vlog explaining in great deal your thoughts & opinions. I am thinking of buying this combo unit for my rental duplex apt building. I look forward to your next vlog and thanks again for your time and effort. From the capital city of 🇨🇦 😊
Thanks for watching, and your kind comments!
A LandLeech buying a heat pump dryer?!? Must be you who's on the hook for the utilities! Guarantee if the poor tenant were paying the utilities, you'd provide the cheapest-for-you-to-buy but LEAST efficient option. RENT IS THEFT. IMPRISON ALL LANDLEECHES.
Have grey sludge draining into sink next to the combo every wash cycle ? Have a strainer to catch it because it had clogged my plumbing Anyone else?
this lint issue was my greatest fear about this machine, but i bought it anyway. we've only run like 50 loads and have half the family size, but this stuff can both compromise the heat pump system as well as promote mold. not great.
Agree. This is why cleaning it thoroughly is a must. I do not need to deal with any mold issues.
Too much work for a washer that costs over $2000! Crap Electric has to come up with a better system
Thank you for the information.
I have this machine and I love it.
Glad you’re loving it, and hope this helps!
Question, can you use the dryer feature by itself? Sometimes I quick wash something by hand and just toss in the dryer.
@@sandi7858 yes. You can either wash or dry if you don’t want to run the combo cycle.
@@thehometownhomestead Thank you, that’s very helpful! ☺️
@@sandi7858 you’re welcome!
Question.. pedestal or no? I noticed there isn't one for your machine. My machine will be on an uneven concrete cellar floor.
Stay tuned for my update at 2 pm today. before you finalize your purchase!
You can use the feet to level it, but the pedestal will make it easier to drain the pump.
I cant get one of these machines for 25 years which is when my speedqueen washer warranty expires. Haha Great review!
Speed Queens are great!
I just got the machine yesterday with the 7 inch pedistal. How loud is your machine when it spins? Mine was installed by Lowes and it sounds squeeky. Im not sure if its from the drum moving or from where the pedistal attaches to the machine. But its at least 10 times louder than the washer it replaced.
Mine isn’t that loud. My guess is that it’s your pedestal. You’re inspiring me to check the volume in my next update.
We definitely don’t have squeaking.
Have you replaced the foam filter yet? Or do you keep washing and reusing? I had to replace my foam filter after a few months.
We have been able to wash and reuse without issues.
The ease of maintenance on the LG is much easier
What happens to the lint that gets past even the condenser coils that you cannot reach? Will it affect performance later on?
I assume it will slow the drying time and eventually lead to a service call if there is buildup past the fins.
I also have this combo, I have found that using a vacuum with a small hose attached helps with cleaning out the lint.
That's a great idea!
Is this portable and does it require washer hook ups or what? What is the specifications on this how is it used?
It weighs 300 lbs, so it’s not exactly portable. It requires water hookups like a normal washer.
Just put small items into a mesh laundry bag. I have been doing this since 1992 with dryers. 😅
I haven’t needed to since this beast was replaced with a Speed Queen! All dry, no issues.
hi so would you recommend a separate washer and dryer then?
Here is the latest update, and it will show you exactly what I recommend at this point.
Why You Should Avoid Purchasing a GE Combo Washer Dryer - Failures Revealed
ua-cam.com/video/tvT6_l_hPjs/v-deo.html
Thanks for watching, and let me know if you have any extra question!
Is that a design flaw? Is GE taking steps to fix that? 🤔
My husband and I was discussing purchasing this machine because we have such a small laundry and pantry area it just makes sense for us to buy an all in one.
For you, what made you buy this machine for your large family? And does having an all in one work for your family time-wise?
@@micheledeanda4854 it worked well, until it threw a “critical error” and quit.
They need to fix this before I would recommend buying. There are workarounds with weather stripping and such, but I don’t think it’s ready to go until this is fixed.
We ended up with a Speed Queen set. No regrets.
Do you think this machine creates more lint than a separate washer / dryer?
No, absolutely not. Our regular dryer had way more lint on the filters than this one does. I’d say it’s closer to 1/5 the lint in one cycle.
I think this machine just forces you to deal with it instead of filling up a dryer vent hose that you can’t physically see. We used to have lint stint visible on the outside of our house at the vent exit, even with cleaning the hose. This isn’t even close.
Very nice review 👍👌
Thanks!
Do clean lint trap ever time do a load?
No. I do it when the machine tells me too, for science. 😉
Can you use powder oxy clean ? And odor blasters
Yes, but stay tuned for my update coming tomorrow at 2. I have a lot to share.
I have the the same thing
Wow this is crazy- I never knew ge made brushes for this I was actually told not to use any brushes because it could damage the computer inside and here I find the company themselves obviously says yes if they make them for it. so my machine worked for a week. It was great and then all of a sudden the power button started blinking and the screen said GE profile. that’s all it would do and after a ge tech came out after two weeks he said he was gonna order some parts and tht was two months ago cause apparently they were back ordered. I haven’t been able to do laundry for months I’ve lost numerous things that couldn’t be saved cause I have a lot of rescue animals which is why I invested in such an expensive washer combo in the first place. From start to finish I feel like I’ve gotten a terrible run around from lowes and ge. I loved it the week it worked but I feel like it’s the worst 3000 bucks I ever spent.😢 I really hope they fix it like they said and I can love it again cause I see nothing but great reviews on it guess I just got the dud😂
Oh no! That sounds terrible!!!
Without some sort of extension cleaning brushes, this thing gets DISGUSTING. GE did make these brushes before the release of this machine for other cleaning, I believe. Thats said, this thing won’t last long if it isn’t cleaned.
Hopefully yours is up and working again soon!
This machine is supposed to be ADA compliant. Researching the combo from the A.D.A. perspective, is this cleaning something could do from a wheelchair or with one hand? My main concern is the drain filter. Getting down on the floor and back up is a issue.
No. Absolutely not. Firstly, that drain filter needs cleaned monthly, regardless of what the directions say. If it gets clogged, it can cause water to backup inside and will flood your floor. Had I been in a wheelchair, there is zero chance I could have managed it. (IF using the pedestal, that might change my opinion.)
Secondly, you will probably have issues cleaning the inside of the filter shown here. It takes a lot of maneuvering to get a good view of what’s going on.
Lastly, mine is currently broken down. “Critical compressor error,” and the part is on a SIX WEEK back order. We are currently 10 days into no laundry at home.
I will have an update coming soon on how this pans out, as we are waiting on GE to decide what’s next.
At this moment, I would not recommend. They do not have the parts available for repair, and THAT is a huge problem for anyone looking at this machine, ADA or not. 🥴
Sorry yours is broken. I contacted GE about the drain filter. Their suggestions, buy the riser, have a friend do it for me or schedule a service call. Service calls once a month would get expensive quickly. Not sure what I'm going to do.
I would be concerned that brushing the aluminum fins you could bend them???
They aren’t aluminum. They’re a blue plastic, but I am gentle with them. Leaving them alone isn’t really an option when they’re caked with wet lint.
So I just got my dryer. Everything comes out so wrinkled. Help!!
Set the “Wrinkle Care” option and let it run for an extra 5 to 10 min.
Option 2 is to set the Wash Complete and pull stuff out and fluff it if it’s twisted up. Usually it isn’t not over full this isn’t needed.