Electric powered would fix the need for the donkey add-on 'clutch'. And keep the speed while being quiet. Slip thru waterways without the dirtbike sounds and exhaust.
I added three more layers of fiberglass to Tom's muffler cover and used epoxy resin. You can stand on it if you wanted to. .... I also added another air intake and exhaust outlet to it along with an adjustable flap on the back so that no water can come in at all..... It is as dry as a bone.
I bet that did stiffen up the cover. I've never worked with fiberglass, so I went the HDPE route, which makes a really sturdy cover. It's nice not getting water in the engine compartment. I seldom see more than and once or two in mine. Most of the water in mine was backflowing through the bilge pump before I installed the check valve in the output hose.
It has a 9.5 hp Kohler in it. I wouldn’t take it in less than a foot of water. Sitting still, it sits 7” down. If you get too shallow, it can suck debris off of the bottom.
They have the prices on the “Order” page. Just click the menu icon on the top left and select Order. You will see the prices for the electronic controls model and the manual controls model, along with a few accessories. Www.mokai.com
Surprisingly, it is very comfortable. The factory seat is hard plastic with a little cushion on it and it is comfortable. I added the Woowave kayak seat to both, add more padding and to make the seat a little higher to give me better visibility over the front of the Mokai.
You definitely have to slow down in big waves. I was out a couple of weeks ago in 20 mph winds on the Ohio River and it got too rough. I went 5 miles and called it quits. Check out the into to this video to see how rough it was: ua-cam.com/video/3T3y2SVTKmA/v-deo.html
@@RiverRatArtifacts No it isn't. I try to watch the winds and stay under 15 mph. A few weeks ago, it got up to 20 and that was too much on the Ohio River for the Mokai.
Do you think a bigger motor would fit in there? I have 13hp Honda single cynlinder and an 18hp vtwin, been thinking of getting one and take it with me on long trips with my polaris 6x6. Many shallow creeks and rivers where I live in with lots of trout and pike fishing spots.
There isn't much extra room with the 9.5hp motor in there. My concern would be with the extra weight and heat from a larger motor. More weight in the rear of the boat would make it harder to get on plane and if it produced more heat, you could have an issue with the HDPE haul melting.
It took a lot of time to make and I spend my spare time out on the rivers hunting artifacts, so I don't have time to make them to sell. PainlessTom sells the muffler/cover on his site, which is: www.painlesstom.com/PNC.html He makes them with fiberglass, so he can crank them out quicker. This one is made out of HDPE, so it is sturdier, but does take more time to make.
Now that I have retired, I want to spend as much time as I can doing stuff I enjoy and not working. Here are a couple of links that might help if you can or if you know someone that can make one. The first link is for the HDPE I bought (2’x2’x1/4” sheet) and the second link is for the fusion stapler/plastic repair gun. I cut the 2’x2’ sheet into 6 pieces. There are three 1” wide strip for the bottom (1 across the front and 2 down the sides) that attach to the engine cover, 2 side pieces and 1 top section that runs from the front to the back and has approximately a 60 degree bend in the front and a 30 degree bend as it goes to the back. On the top section, I scored the sheet where it bends about halfway through with a table saw, so that I would bend easier. I scored the top side and it might have been neater to score the underside, which would have caused less work by not having to fill in the scored area later. I used a heat gun to warm the plastic up so that it bent to the shape I wanted. Then, I used the fusion stapler to staple the pieces together and the welding tip to melt the joints together. I also added JB Weld in the seams on the underside of the cover to give it added strength. buyplastic.com/king-colorcore-plastic-sheet/ www.amazon.com/dp/B0BN9WVQFZ/ref=sspa_dk_detail_2?pd_rd_i=B0BN9WVQFZ&pd_rd_w=YWuWE&content-id=amzn1.sym.386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_p=386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_r=REWZ6PNF17DX7DS572C1&pd_rd_wg=bfMkp&pd_rd_r=fcfcff51-47c2-4e21-9c7b-c74f2d8d3f35&s=hi&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&th=1
@OutdoorRetiree Thank you brother. I completely understand. I just retired a few years back my self. Thank you for your time and info sir. Your a gentleman, through and through. God bless sir. I did 23 years in the Army. 4 combat tours as a infantryman. So I understand, doing what YOU want!
@@shawndale1552 Thank you for understanding and thank you for your service! If you decide to try to make one, look up my email on my About page and send me an email if you have questions. I can answer them and send any pictures that might help.
I've never gone out in my kayak or Mokai without a life vest. I usually have my Onyx M-16 belt pack on, which is an inflatable belt vest. In the winter, I will put on a foam vest. The foam vest gets too hot in the summer.
That is impressive you made it that far. I too have many of Painless upgrades on mine and doing some (more) modifications myself. Bu the way, What is that "tray" that you mounted on top of those ram scoops/engine cover? It sounds practical for many uses. And how did you mount it? Thank you 😊
It is a small sifter that I mostly use to put artifacts, like flint flakes, chunks of chert, etc that I want to take home. Mounting it was simple. I just installed kayak tie down loops on each side of the engine cover and made a bungee cord to fit it snugly. Thanks for watching!
@OutdoorRetiree Oh thats a good idea too. And thanks for "brewing/seeding" of an idea with a modification that may suit me. 😁 Also thank you for your response back. Again congratulations on your 1000 mile adventure.
Mark i love that little boat!!!! I’m going to the river tomorrow in my canoe with a troller motor!!! I’m just happy I don’t have to paddle!!! What’s the app you use for the speed?
I'm lovin it too! That App is called Speedometer Simple. It gets the job done and saves some history if you want to keep it. Good luck on the river today!
Weight does make a difference in the Mokai. I'm 170, which it handles pretty good. I have installed most of PainlessTom's upgrades, such as aluminum steering nozzle, intake grate and had him fix the bearings in the pump. All of which can help the speed. I noticed a 1-2 mph increase after installing his flex ring. I also always use non-ethanol fuel.
@@mcconja I changed the factory one to Tom's aluminum ring, then upgrade to his flex ring when he started making it. I noticed a difference with the flex ring.
No, my longest outing was just under 30 miles and it took 2 gal. to fill up the tank, so I had another 30 miles available. I started carrying a gallon with me, but dropped the weight once I saw what I normally use.
In prime conditions, I have hit 22, but I seldom seem those conditions. I usually have a little chop on the water, some wind, maybe a piece of debris in the intake, so I usually get around 17-18 mph.
I guess you could, but it might be a rough ride for the dog if the water gets choppy. The nose cone is a sealed air filled section that provides a little buoyancy. Painless Tom has been retrofitting it as a fuel tank for customers that want to move some weight to the front of the boat to balance it better.
Never have seen anything like this “ makes you wanna pack up and vanish into the sunset.
Love that kayak. Seems to be very reliable. Thanks for the update.
Thanks Swamp Fox! It's been reliable so far and saves me a lot of paddling.
Electric powered would fix the need for the donkey add-on 'clutch'. And keep the speed while being quiet. Slip thru waterways without the dirtbike sounds and exhaust.
I bet you wouldnt go 20, but i like the sound of no sound. @EcoSpeeder
Awesome 👌!! If I could retire, I'd get me one,and cruise up and down the Green River 👊
I added three more layers of fiberglass to Tom's muffler cover and used epoxy resin. You can stand on it if you wanted to. .... I also added another air intake and exhaust outlet to it along with an adjustable flap on the back so that no water can come in at all..... It is as dry as a bone.
I bet that did stiffen up the cover. I've never worked with fiberglass, so I went the HDPE route, which makes a really sturdy cover. It's nice not getting water in the engine compartment. I seldom see more than and once or two in mine. Most of the water in mine was backflowing through the bilge pump before I installed the check valve in the output hose.
I have the same year and upgrades. Love it.
It is a lot of fun and the upgrades make it better!
Well its official, i need me one of these but im going to swap in a two stroke twin and hit the rapids.
I used to have a Jet Ski years ago and I would love to have that power in the Mokai!
lol you’re gonna be like those racing boats that flip
This is hilarious
What is the horse power and how deep of water do you need?
It has a 9.5 hp Kohler in it. I wouldn’t take it in less than a foot of water. Sitting still, it sits 7” down. If you get too shallow, it can suck debris off of the bottom.
@@OutdoorRetiree thank you!
How come the price is never posted ?
They have the prices on the “Order” page. Just click the menu icon on the top left and select Order. You will see the prices for the electronic controls model and the manual controls model, along with a few accessories. Www.mokai.com
The seat doesn’t look all that comfortable, what would you say?
Surprisingly, it is very comfortable. The factory seat is hard plastic with a little cushion on it and it is comfortable. I added the Woowave kayak seat to both, add more padding and to make the seat a little higher to give me better visibility over the front of the Mokai.
How does it handle the really big wakes from the barges?
You definitely have to slow down in big waves. I was out a couple of weeks ago in 20 mph winds on the Ohio River and it got too rough. I went 5 miles and called it quits. Check out the into to this video to see how rough it was: ua-cam.com/video/3T3y2SVTKmA/v-deo.html
Definitely not very fun when the water is choppy.
@@RiverRatArtifacts No it isn't. I try to watch the winds and stay under 15 mph. A few weeks ago, it got up to 20 and that was too much on the Ohio River for the Mokai.
@River Rat Artifacts Just gave you a sub!
@@OutdoorRetiree I was out on the water the same day not fun. I enjoy your videos the reason I bought my mokai .
Do you think a bigger motor would fit in there? I have 13hp Honda single cynlinder and an 18hp vtwin, been thinking of getting one and take it with me on long trips with my polaris 6x6. Many shallow creeks and rivers where I live in with lots of trout and pike fishing spots.
There isn't much extra room with the 9.5hp motor in there. My concern would be with the extra weight and heat from a larger motor. More weight in the rear of the boat would make it harder to get on plane and if it produced more heat, you could have an issue with the HDPE haul melting.
Wow, what an awesome project. Subbed!
Awesome, thank you!
How much for you to work one of those muffler covers, up good sir?
It took a lot of time to make and I spend my spare time out on the rivers hunting artifacts, so I don't have time to make them to sell. PainlessTom sells the muffler/cover on his site, which is: www.painlesstom.com/PNC.html He makes them with fiberglass, so he can crank them out quicker. This one is made out of HDPE, so it is sturdier, but does take more time to make.
@OutdoorRetiree So 200 wouldn't work sir? Along with taking your time on it?
Now that I have retired, I want to spend as much time as I can doing stuff I enjoy and not working. Here are a couple of links that might help if you can or if you know someone that can make one. The first link is for the HDPE I bought (2’x2’x1/4” sheet) and the second link is for the fusion stapler/plastic repair gun. I cut the 2’x2’ sheet into 6 pieces. There are three 1” wide strip for the bottom (1 across the front and 2 down the sides) that attach to the engine cover, 2 side pieces and 1 top section that runs from the front to the back and has approximately a 60 degree bend in the front and a 30 degree bend as it goes to the back. On the top section, I scored the sheet where it bends about halfway through with a table saw, so that I would bend easier. I scored the top side and it might have been neater to score the underside, which would have caused less work by not having to fill in the scored area later. I used a heat gun to warm the plastic up so that it bent to the shape I wanted. Then, I used the fusion stapler to staple the pieces together and the welding tip to melt the joints together. I also added JB Weld in the seams on the underside of the cover to give it added strength.
buyplastic.com/king-colorcore-plastic-sheet/
www.amazon.com/dp/B0BN9WVQFZ/ref=sspa_dk_detail_2?pd_rd_i=B0BN9WVQFZ&pd_rd_w=YWuWE&content-id=amzn1.sym.386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_p=386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_r=REWZ6PNF17DX7DS572C1&pd_rd_wg=bfMkp&pd_rd_r=fcfcff51-47c2-4e21-9c7b-c74f2d8d3f35&s=hi&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&th=1
@OutdoorRetiree Thank you brother. I completely understand. I just retired a few years back my self. Thank you for your time and info sir. Your a gentleman, through and through. God bless sir. I did 23 years in the Army. 4 combat tours as a infantryman. So I understand, doing what YOU want!
@@shawndale1552 Thank you for understanding and thank you for your service! If you decide to try to make one, look up my email on my About page and send me an email if you have questions. I can answer them and send any pictures that might help.
May i ask why you don't wear a life vest? Just curious
I've never gone out in my kayak or Mokai without a life vest. I usually have my Onyx M-16 belt pack on, which is an inflatable belt vest. In the winter, I will put on a foam vest. The foam vest gets too hot in the summer.
какая модель мотора? Обьем цилиндра, обороты?
It is a Kohler CH395-3190 MOKAI 4000 RPM 9.5 HP (7.1 kw).
Спасибо!. Я также делаю мотокаяки -ua-cam.com/video/Xdj2fjDNTYw/v-deo.html
That is impressive you made it that far. I too have many of Painless upgrades on mine and doing some (more) modifications myself.
Bu the way, What is that "tray" that you mounted on top of those ram scoops/engine cover? It sounds practical for many uses. And how did you mount it? Thank you 😊
It is a small sifter that I mostly use to put artifacts, like flint flakes, chunks of chert, etc that I want to take home. Mounting it was simple. I just installed kayak tie down loops on each side of the engine cover and made a bungee cord to fit it snugly. Thanks for watching!
@OutdoorRetiree Oh thats a good idea too. And thanks for "brewing/seeding" of an idea with a modification that may suit me. 😁
Also thank you for your response back.
Again congratulations on your 1000 mile adventure.
@@Pelagic_Hunter1204 Thank you! I appreciate you stopping by. Good luck with your mods!
Mark i love that little boat!!!! I’m going to the river tomorrow in my canoe with a troller motor!!! I’m just happy I don’t have to paddle!!!
What’s the app you use for the speed?
I'm lovin it too! That App is called Speedometer Simple. It gets the job done and saves some history if you want to keep it. Good luck on the river today!
U won’t need it lol
What is your weight? We sure have trouble getting ours to move that well.
Weight does make a difference in the Mokai. I'm 170, which it handles pretty good. I have installed most of PainlessTom's upgrades, such as aluminum steering nozzle, intake grate and had him fix the bearings in the pump. All of which can help the speed. I noticed a 1-2 mph increase after installing his flex ring. I also always use non-ethanol fuel.
@@OutdoorRetiree I suspect our wear ring is the culprit.
@@mcconja I changed the factory one to Tom's aluminum ring, then upgrade to his flex ring when he started making it. I noticed a difference with the flex ring.
How many miles per gallon ?
Mokai says about 15. I usually do a lot of stop and go running and I get 13-14 mpg. It has a 4 gallon tank, so you have a good cruising distance.
Have you pushed your fuel limit yet? I’m nervous about it and always carry fuel with me.
No, my longest outing was just under 30 miles and it took 2 gal. to fill up the tank, so I had another 30 miles available. I started carrying a gallon with me, but dropped the weight once I saw what I normally use.
So freaking cool ! 👏👏👏👏👏👏👏👏👏👏👏 you lucky bugger 👍👍👍👍
If can go downhill even a little hill will get right up to 20. It is slower going uphill i found
In prime conditions, I have hit 22, but I seldom seem those conditions. I usually have a little chop on the water, some wind, maybe a piece of debris in the intake, so I usually get around 17-18 mph.
Man I want one so bad
Could You cut a hole in the front bulkhead for a Dog?
I guess you could, but it might be a rough ride for the dog if the water gets choppy. The nose cone is a sealed air filled section that provides a little buoyancy. Painless Tom has been retrofitting it as a fuel tank for customers that want to move some weight to the front of the boat to balance it better.
IS THIS THE CHIGGGG!!!!
No, I have metal detected with Chigg, but this isn't him. He does have two of these boats, but he uses his River Rat Jet Boat more than his Mokai's.
Send your muffler to jet hot coatings. Get the 1500 coating. Will make a huge temp difference. 😊 probably 150 bucks.
I haven't heard of that before, but I'll check into it. Thanks for the tip!
Put a hyabusa engine in it
I'd like to have the power it offers, but it weighs way too much for this boat. More power would be great though!
Same like riding a jetski
Yes, it is very similar.