Bissell Proheat 2x

[@peezybeezy470]

This was the most helpful video ive seen For my issue! Thanks

[@MpVacuum316]

I’m glad I was able to help …

[@antonyall]

Excellent video and tutorial. I was immediately able to locate the problem which was the bridge rectifier which I verified as I was able to start the pump motor using an external 12V power source. Problem is that I am unable to source the bridge rectifier so if anyone can assist would be appreciated. Thanks much for the time to post this vid which I am certain has helped so many of us mere poor mortals. Thanks again.

[@MpVacuum316]

I’m glad you get it fixed

[@adenlove9207]

The most helpful video i have ever seen, question to be raised, pump is turning and heater was clogged and cleaned but still not spraying ,please note i removed the pipe which comes from heater and before the Solenoid still there's no water, please help.thks

[@sjgrall]

I replaced the hose on one back in like 2008 without instructions...I was successful, but swore I'd never try that again, lol. I gave it away to a friend, still fully functional, around 2017. It was 11 years old at the time.

[@TheeLosAngelestud]

And i need help taking the plastic off so i can get to all that.. i dont want to break the plastic but i dont see any more screws connecting so i guess ill keep trying.. my problem with it is the red rolling brushes wont spin but it turns on an the fan is spinning an it only has 1 belt on 1 side so if any suggestions id appropriate it.. btw i have a brissell pro heat select pet 2x

[@nathanield.4527]

Good job on this video by the way.

[@waldtk3000]

I have an old bissell proheat 2x that was in storage for a long time and was not working. Turned out that the heater core was all clogged up. I replaced the pump and bridge rectifier just in case, but it is not clear how to connect the hoses to the 12V pump. I know the where the hose that is hooked to the heater core is connected to the pump, but how about the other two hoses? To which ports on the pump does the other two hoses connect to? Thanks for any input.

[@MpVacuum316]

Hello
could you send me a picture of the two hoses you are trying to connect

[@waldtk3000]

@@MpVacuum316 Hello! At the moment, I can't because I am out of town. But I should be back in about 2 wees and will send the pics then. Thanks!

[@luiscanul6467]

Good video, I have a bissell project 2x, am already check the pump and it is working, am already clean up the heater also, and still won’t spray, any sugestión on what else can I check any idea will be appreciated, thanks

[@TheVacuumWizard]

if the pump is working and the heater is not clogged the tubes must be clogged

[@Moveon10001]

@@TheVacuumWizard Or one or more of the solenoids are bad.

[@jimraiders7436]

I’ve only used the machine twice it’s been stored for 4-5 years. It still looks brand new. I just took it out and my brushes aren’t turning and no water spraying at all. All tanks where empty all this time. Belts look fine. How much does pump and motor cost together?

[@MpVacuum316]

Pump runs about 25 but I think the problem you have is the heater might be plugged up ….

[@KanataVIP]

I removed the heater and found that I can force air between the inlet & outlet, so it must be one of the other components (solenoid, pump). On my model (looks like the one in the video) there are 2 hoses that go from the plastic riser tube (vacuum?) to the top of the pump and the pump motor. Do they actuate relays or something?

[@nathanield.4527]

To test the solenoid, just plug in the carpet cleaner and pull the trigger to heat for a clicking sound? Do I need to turn on the carpet cleaner then pull the trigger?

[@paulsfish123]

Can u do 1 on the brush roller motor my spins on start up then stops

[@blambmtb6189]

That's what mine does too. Then there is
a slight burning smell

[@wisezombie6856]

I have the same one but not getting suction on the bottom part but I am on the tool wand. I turn the dial to carpet but suction. I cleaned it and took it apart cleaned the filter and nozzle on the front. Still no suction??? What am I over looking? Can the drive belt cause it to not have suction on the carpet part? Still have suction on the tool wand?

[@MpVacuum316]

Hello Joshua
have you checked the red screen inside the dirty water tank.

[@nathanield.4527]

If you are able to spray water thru the accessory hose but do not get water out of the nozzle, could the pump still be bad?

[@MpVacuum316]

No ...the pump should be good. If this is your problem I will the solenoid valve going towards the spraying tips ...

[@MpVacuum316]

Check the solenoid valve ...

[@nwong8]

Mine stopped spraying from bottom but still sprays using the hose tool. Hose and spray nozzles are clean. I also cleaned the heater. What else could be the problem?

[@MpVacuum316]

It could be your pump or the solenoid valve

[@nwong8]

I replaced the solenoid. cleaned all the hoses and heater. Still same issue. In fact, now the hose spray stopped spraying also. I checked the pump, it does have spark. Does that narrow it down to bridge rectifier?

[@MpVacuum316]

Yes the pump runs on that bridge rectifier. Your pump could be plugged up even though it still sparks.

[@nwong8]

Replaced the pump and bridge rectifier. Spraying is fixed but now it has low suction. Suction was fine before replacing those pieces. What do you suggest?

[@MpVacuum316]

I would check the motor gasket.....