DSI USB C Mod C to C

This will work with basically all USB C chargers making it much easier to charge up your old electronics. No need to buy a special port with a board for this mod. Just a port and a couple of 5.1k resistors.

[@goof539]

This is pretty epic man. Nice job!

[@Johntriger]

Thanks, sure beats having to find the special charger Nintendo made haha.

[@Johntriger]

ua-cam.com/video/8H1PPEl0tLA/v-deo.html
See this video for the long video of how I did this mod. Just need a usb c port no special part just for dsi required for this. In this mod I added 5.1k ohm resistors to enable usb c to c functionality.

[@ok-eh3lk]

What guide did you follow to do this mod?

[@Johntriger]

ua-cam.com/video/8H1PPEl0tLA/v-deo.html
You can watch this where I do the mod, didn't follow a guide since this is just a usb port that i soldered in place of the stock port. I use 6 pin usb c female ports to do this. The middle two pins need to be soldered to ground with 5.1k resistors to get usb c to c to function otherwise you have to use a usb c to a cable if you just solder on the hot and the not. Hope that was helpful.

[@ok-eh3lk]

@Johntriger Thank you so much! Awesome work dude 😄