Dude your on a roll you already have 2 engines done and Bacman 1 I like to imagine what Peter sam, duke,rusty,Duncan,and Rhenas would look like great work on sir handle and Skarloey
Oh for gods sake EVERYONE WILL YOU STOP ASKING FOR PART 6!!!!!!!!!! Cudak has a life, he may not want to continue it and you have to respect that so stop asking!!!! And actually pay attention to the video it's pretty rude
It looks like the actuall tv show. I wish i can get my hands on any of these small narrow guage engines like Skarloey, Rheanese Smudger, Duke, Peter Sam, Bertram, Fearless Freddie, Mighty Mak, Sir handel. I also want the coaches as well. Maybe i can make my own narrow guage episodes.
That is so impressive! I can only imagine how many back-breaking weeks it could have taken to make this. My only question is are you going to leave Skarloey without his nameplate, or just decide that it's just fine without it? All the same though, I think the model looks fantastic! :)
Been kicking Skarloey around since the beginning of November, but got delayed at least a week. What you didn't see in the video is that the first paint job (and pinstripes!) had to be stripped off and started all over again. Much more pleased with the results now. I'm planning on ordering some etched nameplates for both of them. For my needs, they'll have to wear different names depending on the show they'll be on.
Word of warning to anyone trying this on a die-cast model: For the love of God, wear something that'll prevent the bit from going through your fingers when the Dremel flies out of your hands.
At this point, if they happen, they'll be to-scale Season 4 replicas, like the scratchbuilt Sir Handel I'm working on at present (not the Bandai one here).
This is impressive man! I agree that the Bandai Tecs are better choices anyway, plus, Bachmann is only doing CGI, which isn't bad, but as a classic series fan, the Bandai Tecs used from HOn30 are better choices, despite the expense! Awesome! Also, would the other Skarloey engines be made by any chance?
Not sure. These guys are for looks on screen more than anything else, so was more concerned about visual authenticity. I can always futz a coupling system where nobody can see it.
Amazing Video!!! If I may ask, I know you said they were micro scale decals. But what type/model number? They needed to be a set size or did you cut them smaller ?
Nope. What's next is the real Sir Handel. As in a near-perfect replica from the series. It's already on my Twitter feed. Oh, and Part 6 is on the way too...
![PART 6...ish [April Fools - Random Project Collage]](http://i.ytimg.com/vi/UNcn9F17jBE/mqdefault.jpg)
![PART 6...ish [April Fools - Random Project Collage]](/img/tr.png)
I would love to see a Bandai Tech Peter Sam converted into a Bachmann version.
AWESOME WORK ON THE MODEL. This looks amazing, you are so talented!
"Styrene stock with a sanding block"
Brilliant, just brilliant
The memories.... the nostalgic. ^_^
Oh my, that looks lovely!
Awesome work, I can't wait to see what you do next.
Dude your on a roll you already have 2 engines done and Bacman 1 I like to imagine what Peter sam, duke,rusty,Duncan,and Rhenas would look like great work on sir handle and Skarloey
Oh my god you're right about the front mirror height. My whole life is ruined
Your custom models look very accurate they should have chose you to make the Thomas models in the tv series
you are amazing at what you do no one I know in person could do this
you should make a series with these enginw, these are incredible!
Bachmann skarloey won't look ridiculous next to sir handle they will look nice together
Oh for gods sake EVERYONE WILL YOU STOP ASKING FOR PART 6!!!!!!!!!! Cudak has a life, he may not want to continue it and you have to respect that so stop asking!!!! And actually pay attention to the video it's pretty rude
Thanks for the kind words. (But guess what's happening?)
Sans and Carrot shut up he is not being rude your being rude he is just teling people to stop asking for part 6
exactly
Amazing!
Can you make Duncan, smudger or ivo hugh, I know ivo isn't a bandai but that'd be so cool! Awesome video aswell :)
I feel like this should have been the real bacmann skarloey
It looks like the actuall tv show. I wish i can get my hands on any of these small narrow guage engines like Skarloey, Rheanese
Smudger, Duke, Peter Sam, Bertram, Fearless Freddie, Mighty Mak, Sir handel. I also want the coaches as well. Maybe i can make my own narrow guage episodes.
That is so impressive! I can only imagine how many back-breaking weeks it could have taken to make this. My only question is are you going to leave Skarloey without his nameplate, or just decide that it's just fine without it? All the same though, I think the model looks fantastic! :)
Been kicking Skarloey around since the beginning of November, but got delayed at least a week. What you didn't see in the video is that the first paint job (and pinstripes!) had to be stripped off and started all over again. Much more pleased with the results now.
I'm planning on ordering some etched nameplates for both of them. For my needs, they'll have to wear different names depending on the show they'll be on.
Wow! That would've been absolute torture for me. Looking forward to see what you have in store for us!
Wow your leaving bachmann in the dust with how much details are on these
looking great!
The proccess makes me anxious
The next Peter sam
I’ve always wanted to put a wooden railway chassis on one of this guys. But I don’t have any soooo lol
I probably would have used the dremel tool to drill the port hole windows to look much better, less risk of damaging the cab.
Word of warning to anyone trying this on a die-cast model: For the love of God, wear something that'll prevent the bit from going through your fingers when the Dremel flies out of your hands.
Skarloey
So who's next?
Until Rheneas or Rusty are released, Peter Sam or Duncan are most likely.
Are you telling me the people who make my beloved gunpla also make Thomas merch
I'd love to see smudger or Duke, but you'd probably have to wait till they release rheneas spares ;)
At this point, if they happen, they'll be to-scale Season 4 replicas, like the scratchbuilt Sir Handel I'm working on at present (not the Bandai one here).
Nice
Love the Skarloey model. Just a question - are you going to consider applying decals for Skarloey's nameplate and #1?
ok that is beautiful...
also what Bandai model do you plan on motorizing next?
cool!
will you try and make Duncan next?
I was the first one to view it. Btw, good job, cudak888. That's all I have to say.
Who do you think on scratchbuilding next?
Nice, will we get to see more of that Rheneas station layout that's shown in this video?
Oh my gosh, that looks stunning! Didn't you hint somewhere that Duke was next?
This is impressive man! I agree that the Bandai Tecs are better choices anyway, plus, Bachmann is only doing CGI, which isn't bad, but as a classic series fan, the Bandai Tecs used from HOn30 are better choices, despite the expense! Awesome!
Also, would the other Skarloey engines be made by any chance?
What about Skarloey's name plate and number plate? And What about the replica James part 6?
Fantastic video! Are you going to print out numbers and nameplates for Skarloey eventually?
What are you gonna do for rolling stock and coupling system?
Not sure. These guys are for looks on screen more than anything else, so was more concerned about visual authenticity. I can always futz a coupling system where nobody can see it.
who are you making next, i'm learning so much
Disliked by Smudger, no doubt.
Make rheneas
peter Sam
Or Bertrum
and diesel 10
stop annoying him he has a life outside of this
Are you making a bandai peter sam in bachmann next?
Could you do Duncan next please? All you have to do for the wheel base is remove the rear axel on the Skarloey wheel base.
Duke is next....soon as I get my fingers on a Bandai Duke. Not cheap, those things.
cudak888 If you are going to make Rusty, i suggest making him using the ertl Rusty, so you can save some cash.
how do the ertl models (standard and gold rail) compare size wise with the tecs?
baxter22071990 pretty sure gold rail is just Bandai without side rods.
Very nice Cudak! Since you've made theses two, will you be converting the other Bandai models to fit N-Scale?
do rheneas next. anyways, when's the gauge one james going to be done?
Please cudak888 Please Make Part 6 Of The James The Red Engine Project
Jessica Bowen check his twitter
"STILL WAITIN' FOR PART 6!"
Are you going to do Rheneas too.
why the hell didn't bachmann put in charge of their narrow gauge line?...
Please come back to UA-cam!
u should do proteas
Amazing Video!!! If I may ask, I know you said they were micro scale decals. But what type/model number? They needed to be a set size or did you cut them smaller ?
It was what I had on hand - the lower stripe off an HO GATX Leasing decal set, cut to size.
@@cudak888 How Strong Is Styrene?
But where's Skarloey's nameplate and number?
Would this Skarloey still look good with an HO Thomas or no?
This is amazing ! Do the bandai tec wheels fit on the track or do you need to Bachman bogeys?
Build rheneas next
what about rolling stock
Can you use Bandai for making ho scale models?
The standerd gauge ones fit great on there own so it would make it better
And by the way where is Skarloey's Nameplate?
where it's the part 6
I thought these models were discontinued? How are people able to find them if they're rare?
EngineerRailMan Probaly Ebay?
Do Bachman rheanaes
2 questions : Did this cost more or less than the Bachmann skarloey, and do they still look ok next to HO models?
can you Send a link or tell me where you get this pleassee
you forgot to aply his nameplates
Can you make rheneas or peter Sam?
Are you part of the Thomas Creator Collective?
If not, maybe you should consider...
Nope and nope.
hey ck888 are you going to make peter sam or ivo huge?
There is no Bandai Ivo Hugh.
How about you make the other engines
Make Peter Sam next time
Will you add his number and nameplate
Yes, but etched.
What's next? Peter Sam?
Nope. What's next is the real Sir Handel. As in a near-perfect replica from the series. It's already on my Twitter feed.
Oh, and Part 6 is on the way too...
Well, can I ask why you decided to motorize the Bandai TECS Sir Handel?
When I thought that I could 3D track a face on a model of that size...which didn't work.
do renehas
do you wont to mad a LBSC Thomas
hi make a bandi other engines not just narrow gauge engines
jokkeeee😂😂
"Mounting Hole"
There is no name or number
make rusty
First.
Nope. I was first. Very first, I might add...
cudak888 Clever
Can you make Duncan, smudger or ivo hugh, I know ivo isn't a bandai but that'd be so cool! Awesome video aswell :)