2013 Ford F150 Jump Seat Center Console Swap
Вставка
- Опубліковано 4 жов 2024
- I ordered a center console from Ebay and swapped my jump seat.
Double DIN F150 Dash Stereo Kit
amzn.to/3i7MVCr
Rear Camera
amzn.to/35sOFBk
Metra Steering Control Box
amzn.to/3bpjryv
Pioneer DMX 2600NEX Stereo
amzn.to/3q2u52c
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
I did the same to my 14 stx best upgrade I’ve done so far
It cheap and doable if you can find the parts
Looks good. I wouldve went ahead and did the console shifter but using the space for switches is an excellent idea
The console shifter would have been a nice touch, but it was much more work than I wanted to put into this conversion. To this day I still have not put in the switches and the slot has not become my snack and beef jerky holder.
@@powerkarmawhat did you use to put in the space for the console shifter
@@brentonhickerson1722 To this day it is still my snack and beef jerky holder. I still have not installed all my LED light bars, my plan is to put in a switch panel for all the lights.
That Looks clean man. Wish I could hire you to do that exact work to my f150 Haha
Tempting, If I did not love my real job so much I would consider doing this for others. In my next video I will be filling in the floor shifter void with a panel and switches for LED lighting
Nice job!! I'm wanting to do the opposite lol
I'm shopping for a truck, and found one that I like, the only thing is having 4 kids and my wife, I need the extra seat lol
I still have the original grey vinly one that I took out of the truck. I will give it for free to anyone that wants to pick it up or pay to ship it.
Console looks great. I just got a 2013 as well and my only real complaint is that stupid useless jumpseat. So I've started looking for center consoles, which led me to this video. I don't really want the trim that goes up the dash, just plain console for some storage and cup holders.
2nd thing I need to figure out is how to get started with accessing the electrical system to put on a few utility lights with switches. I'm hesitant to drill holes in the body but I may just have to at some point.
If you look around you will find the console that is stand alone. I personally did not like it and wanted it to blend into the dash. Also the lights and electrical are not hard, I still haven't got around to it, but I have utility lights for the front and rear with all the harness, I just haven't got around to installing them and making the video.
@@powerkarma a basic "how to tap into your truck's 12v system" video would be great! Install a light and a switch or something. If I can do it once I can do it anywhere on the truck.
Anything would be better than this gigantic monolith of a jumpseat. The leather trim has no cup holders on the back. It is just one big block of leather covered padded upholstery. I can't even find a picture of it anywhere or I'd link it.
Man that looks good
Thanks, to this day I still have not installed my light bars and light switches in the shifter opening.
Excelent...! I wonder if this version of the console will be compatible with a Ford F-150 Fx4 2011?
If I recall correctly, 2009 to 2014 are the same, so it should work.
I have a 2004 (2005 style) lariat white with black leather crew cab 4x4 5.4. I wish I could swap it to a front black leather bench seat with jump seat and console and change dash to steering column shifter! Don't like a console. I want to be able to turn sideways sometimes and stretch or lay down. Or, ride someone in middle.
You will be doing some customizing for sure, to get what you want. It can be done.
Hey can you send a link for the console? Looks pretty sweet! I like it and want to do the same with my xl.
The best I can do is provide the descriptions since I found all the parts on ebay. here are the parts I orders for the dash trim and center console. 11 Ford F150 Raptor trim, dash, right inner AL34-15045J78-HA39PC
2009-2014 FORD F150 CENTER LEFT AC VENT DASH TRIM BEZEL W/ COIN TRAY SWITCH
Fits 09-14 Ford F150 Raptor Style Front Bumper Grille Hood Grill Guards Black
2013 2014 Ford F150 Front Floor Shift Full Center Console With Lid FX2 FX4
@@powerkarma Thank you sooo much! That's very helpful. Definitely subscribing.
Do you still have the jump seat? I want do the reverse swap of what you did
Yes, I still have it, are you in the US?
I still have it, if you are interested in it. You can find my email in the about me section.
Can you explan a little be more about what you did with your red key power for the stereo ?
Yes sir, on the driver side, under the dash, toward the upper left above the main harness pass through, there is a 16 pin connector for the parking module. Pin #1 violet and brown wire is an ignition power going to Fuse 34. I cut the wire from the connector and soldered an extension up to behind the stereo. I also put some additional splits from it for future ignition power, hope that helps
@@powerkarma OK I think you just saved the day! I been working on my radio all night last night trying to figure out why my stereo only powered on when I spliced the red and yellow wires together. Of course doing it that way, the stereo wouldn't turn off when the key is off.
Anyways I'm assuming that's the issue you ran into as well leading to you splicing into the other harness you mentioned?
@@joshbrowning3488 Yes, I found the issue right away. So I purchased a subscription through cengage for the wire diagrams for my year and truck. My truck is not using the parking module and it is fused so I just tapped into it. I should have made a video doing the install of the stereo, the custom harness I made to keep the steering wheel button functions and the multi ignition splice location for expansion. I will be going back into the dash soon when I install my 3 LED light bars, and custom switch panel to fill the shifter hole. So I will shot a video of what the stereo harness looks like for future DYIers
Let me add this, I purchased a steering wheel button control module for the stereo. However the one I purchase did not have an ignition control, which I discovered later they make. That is how it really should have been installed and there would be no need to look for an ignition source. I already had the module, so it was easier for me to use what I had and run an ignition source. Plus I will need it later when I make my custom light bar switch panel with blue LED back-lighting on the panel.
I got a few of question! First why didn’t you want the jump seat ? Second do you still have the jump seat and will it work on my 2011 F150? You also did a great job on your truck
I did not like the jump seat, I wanted something that had a deep console and more space to put my junk. I don't plan to carry another human being in the middle seat. I still have the jump seat. I will say based on year model range year 10 to 14 that it should work, however as I learned on my install. the hole spacing on the jump seat and console were off by about a half inch. So I would look at your current truck hole to hole measurement and measure the hole to hole on the jump seat.
@@powerkarma thanks for responding so quickly and also on the heads up on the holes being an half inch off
I did the swap also and have the mounting bracket and the seat, if interested
when I received my console they included the mounting bracket, for the console, that's when i noticed the difference in the location of the holes
Thx
No problem
Are you looking to sell that jump seat because I am in the market for one and your jump seat matches my 2014 F150 interior
You are the first to ask about it, you can have it. Just cover shipping or pick it up. It has been just sitting in my garage. I will update my about page with a email contact.
Nice truck,⭐️⭐️⭐️⭐️⭐️
Thanks 👍 I like this truck. I looked at new trucks that would be similar to the way I customized this 2013 F150 and the new truck would be about $50K
Think I could do this same thing on a 2005 ford f 150 ??? Hate the jump seat
Thanks
I'm sure you can, but I know the part are not the same. I'm sure you could fit other year models with some modifications if you want to go that far.
Do you happen to know if that 7 inch pioneer will go in to the stock stereo hole/housing it looks to be exactly 7 inch?
I don't remember the exact measurement, but if you use the parts kit I listed in the video then the stereo fits perfect with no modifications.
I have 2012 xlt,can i do the same?
The 2012 is in the same generation. If you can source the parts you should be able to upgrade the console.
How did you hook up the AC vents on the rear of the console? Wanting to do this swap but am trying to get all my bases covered before I start & I haven’t found anything on hooking up the AC vents.
I did not hook up the rear vents on my install.
Wish you would speak more to project, less on why or what you saved on ebay.
Point taken, I tend to ramble with a general idea of what I want to convey.
How did you hook up the outlet and cigarette lighters in the center console?
The harness was already there for it from the jump seat I removed. The back of the jump seat had the outlets on the back of it. It was plug and play, however I did splice in an additional connector for future upgrade I'm going to make to the new console.
What is the console you got called?? I want to get the exact same one
This is how it was listed on ebay
2013 2014 Ford F150 Front Floor Shift Full Center Console With Lid FX2 FX4
I have done they swap, can't find the dash piece for the left side, was there a part number on the back side , or could you put me in contact with who you got yours from, local ford dealership won't help me
This is the ebay account I got it from, but I just tried looking on ebay, and no one has one listed right now that I can see. www.ebay.com/usr/1-stopautoparts
Bam!, www.ebay.com/itm/393325075178?fits=Year%3A2013%7CModel%3AF-150%7CMake%3AFord&hash=item5b94005aea:g:7R8AAOSwGwtgn~x7
@@powerkarma thank you , just ordered it
Where’d you get the console?
I found it on Ebay
How did you make out with the custom trim peice?
Well... Like many projects I have going on, I have not got around to finishing it yet. Overall everything is functional, it still looks nice with the console and it made it a better travel vehicle. I will get around to it.
@@powerkarma yeah man it looks great I definitely plan of doing it one. Maybe I could get something 3d printed to fit
Where u get the piece at? Where you have the holes?
I got the console from Ebay, all the other parts I put in the description. The holes matched up with the existing holes from the jump seat.
@@powerkarma Could you send a link? That looks absolutely great man!!! I want to do the same thing to my 2011 xl to make it a bit nicer. Thanks for a great video!!!
Is it possible to shift the gear shifter on the concel
I don't know that I would put that much work into it to move the shifter to the console. I'm going to use the console shifter opening to put my LED light bar switches. right not is makes a good place for my bag of beef jerky while traveling.
@@powerkarma i have to agree, to move the shifter and get a new or used Colum is not worth the work
Question how can i find the piece to fill the center shifter hole ??
I don't think they make anything to fill it. I was going to put in a piece of plexi glass and cut holes for the switches to my LED light bars.
@@powerkarma hello! I did the same thing to my truck. I have a 2013 f150 tuxedo metallic black. I purchased a harley-davidson consol with the color coded trim as you can Imagine, it looks way better with the console than with the seat. I came across the same issue where the shifter goes and couldn't figure out what to use to cover it. I came across an organizer on Amazon. Ironically, in your case, it's meant for a Toyota. It works well and has the perfect dimension to fit as a storage tray. I left pictures on the review for the product. It will be the only picture about a Ford lol
@@JuanTorres-yc9qg I still plan to install my switch panel for all my LED light bars. I will have 3 switches for LED lights, 1 volt gauge and 1 USB charge port on the panel. I have not got around to it yet with so many other projects I got going on. I will get to it soon and shoot a video of the install. As for now it has become the place to hold my beef jerky bag and snacks while on a road trip.
@@powerkarma gotcha. There you go lol can always find a use for it.
@@JuanTorres-yc9qg can you drop the link for that?
Would this work on a 2012 ?
Yes, it will work on a 2012
how much did this cost total?
Back up camera $20, Pioneer Stereo $360, Double DIN Dash Kit $33, Center Console $294, LH dash trim $60, RH dash trim $40, Raptor style grill $100 - Total $907
I want to do the opposite and get rid of my center console for a jumper seat so i can have a girl ride next to me
I still have mine that I would give away, but it is grey vinyl no frills, it does not have the built in console and cup holders.
Why make a video if you're not gonna show how you did it I mean how pointless was it to watch this
I'm not always good at making great videos.
Sorry if I sounded like a jerk. Wa's having a bad day. Lol
IT DID NOT GO ALL THE WAY THE CONSOLE BECAUSE YOU HAVE THE SHIFT ON THE WHEEL NOT IN THE CONSOLE
Correct, This console is not mad for this specific truck, this is a MOD.
Do you still have the jumpseat?
Yes, I still have the jump seat