100hp 140+ MPH Custom Yamaha Banshee
Вставка
- Опубліковано 13 бер 2021
- I buy a ridiculous custom Yamaha Banshee with a 600cc sport bike engine swap. This Banshee is supposed to make 100hp and a top speed of over 140mph. Can we fix it up and make it run? #Yamaha, #Banshee, #100HP,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►FORUM: 2vintagerider.com/community/
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Who wants to be the first to test drive it?
Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot!
Check out my Instagram: 2_vintage_
Thank you for all the support!
I will
@@neumansown alright I might need you to haha
Let me know, I live in gb
That thing looks pretty sketchy....whoever built it didn't own a square or straight edge...lol. Sketchy but fun.
I just got a 250 timberwolf bored out to 350, big cam, crank, piston, timing chain and rod. I've never seen a 250 built like it is it's all stock plastics and wheels that's about all that's stock on it. I got it for free not running. I cleaned the carb and went through it and now she runs great. She'll stand up in every gear.
I wouldn’t trust going over 30mph on that thing. Looks like its held together with some rusty bubblegum welds. 😂 cool build though but looks sketchy asf.
It could definitely use some gussets
Yh looks dodgey
It looks like a METH MACHINE.
That's awesome
Mad meths machine haha
if you look up ""death trap"" there is a picture of this bike there....
😂😂😂
Accutuly
The only thing i saw was your house
I surprised you still alive living there
@@ericablack2950 I live in a trailer... And your sister just left with her $20.00...
Ray Charles did a good job welding that together 😬
Lol I just started watching can't wait to see these welds 😂
Ray Charles welded it with his feet blindfolded 😂😂
Helen Keller helped
Inspected and passed by Stevie wonder. Lol.
He’s gonna get hurt bc it’s gonna vibrate the welds apart over 30mph I think he wasted 850$ on this.
I do believe a lot of alcohol was involved in the creation of that their machine😜
HOLY HELL!! What kind of welding is that???? Stackin turds not dimes lol
Perfect description 😂😂
This would be a really cool frame up project. I would love to see it get completely tore down and be dialed in!!! It’s definitely super fast and fun
i wouldn’t even consider running that thing before every bearing, bushing, and every other part was replaced on this thing
If they took the engine and half the frame out of a katana 600 that was somewhat aerodynamic, only had 2 wheels, and only topped out about 135 on a good day. They put all that weight into a banshee frame, with 4 wheels, no aerodynamics anymore, and weighs more than the katana weighed, I'm thinking 180 might just be a pipe dream. Could still prove to be a blast to rip though.
Be careful with that thing it looks like a death trap . Those welds look suspect, if one ever let go at 100mph you know what the story would be
Good week to be a 2 vintage fan. Lots of content this week. Always look forward to a new video, keep up the good work 🤘
Good ole Harbor Freight Flux Core welder work at its finest... lmao. Be safe!
Holding the clutch in to start a motorcycle is motorcycle 101.. You done a lot of motorcycles and you didn't know that...
On my two motorcycles I own you only have to hold the clutch in if it's in gear. If it's in neutral, then you don't have to hold the clutch in.
He had vise grips holding it
Cant wait to see this thing in action. Great vid as always 👍
Awesome video man keep up the good work
Thing looks awesome, happy it ran for ya. Great video man
That engines are bulletproof and that Yoshimura pipe is a good one
Like how you took your time and made sure everything was working right before you tried to start it nice vid can’t wait to see you ride it
You should use a Gatorade bottle for gas when your testing the machines... I can't believe you got that Frankenstein bike running... Whoever ruined that banshee frame for that project should be jailed lol...
I used to work on dirtbikes and 4 wheelers, rebuilt 2 kx 80's, a blaster, a yz 125, and had a few Xr 75s I bought used and would rebuild them on a budget, I was 15, hahaha I am inspired to get a new project! Great video!
Never seen such skill working the starter, choke, and throttle simultaneously🤣 got them hands a reachin
Love your videos m8 keep it up !
Can’t wait to see her run looks awesome
Quick question why when my dirt bike turns on, warms up and I ride it for what 2 minutes and I turn it off, it won’t want to turn on after (kickstart)
Joe, man, you need a small test gas tank to hook up to all your projects. Pouring gas in the line is killing me. Lol
Same. I would get extremely annoyed.
That thing is a beast! Carborated inline 4 sound is so freaking adictive when they hit the sweet spot!!!
I've always just heard it and said it like YO-shimura
^^^
Yosh like josh
I like E
Mura like Moor A
Josh-E-Moor A
@@ZafiraSteve Legit know one at all says it like that
@@monstereng43 did you live in Japan for many years?
@@ZafiraSteve No i did not! I would still be saying it the exact same way as i do now!
Any idea of the year, make and model of the engine?
Great stuff as always
Always present for new videos 😌 good video bro
I was just watching the Polaris one 😂then I got a notification
Should have started with a shopping cart. The structural integrity would be better, as would the geometry.
i would definitely look into refabricating some of that. You could definitely make adapter plates to bolt it together. I don't know how good of a fabricator you are but this might be a great opportunity to learn! The katana was a pig, but that will definitely scoot in the banshee frame. Kind of sad they fd up the banshee though, they're getting harder and harder to find. Pretty excited to see you fix her up though. A good sport bike motor swap with proper fabrication and CLEAN wiring can go for 3k plus. Without it though, it's worth maybe what you paid for it. Has great potential, but take the time to really do this right.
Pumpin out videos every day 👍👍👍👍👍👍👍👍
You are definitely becoming my favorite atv UA-cam channel !!! KEEEP IT UP
I think it will run 140mph. That's a motorcycle engine on it. Nice🔥🔥🔥🔥🔥
Im excited to see this run gotta hurry this video series
Damn, cant wait to watch this beast go 😰
cant wait for a ride on it man
You should totally keep this ,this isn't something you see every day
keep and clean it up/reinforce welds maybe
the thing is a complete hackjob
This thing is the first thing to get rid of lol.. you don’t see it everyday because it’s absolute trash. You can’t even change the fucking oil filter..
@@IllestA4 yeah tbh I agree, it would need a complete re-fab, may as well make an entirely new frame or sub frame at least. Welder, tubing bender, etc.
I see these all the time and there always a hack job rarely you'll see a decent one, I say get rid of it
I’ve been trying to figure out the wiring on my raptor 350 and I guess I did something wrong because when I connect the battery the start automatically starts going? Any tips
At exactly 12:53 the last time u hit the start button, it sounded like something happened. Is it just my phone? I’ve literally watched it 6-8 times😂.
I heard it too...lol. Joe didn't say anything so I shrugged it off...lol.
Sounds like it might be running lean, and with those white plugs she got REALLY warm by the look of it. Nice video!
That quad is sick looking 🔥👍
I was screaming hold the clutch in the entire time 😂
Nice vid can’t wait for the ride vid
I built a shifter cart 10 yrs ago with a cbr motor on it. It was nuts. Be careful, they are squirrelly.
bet jade loved this one dude xD what a shed haha , potential is so there though :) keep em coming , I love your vids :D
Definitely should redo this from the ground up it would be a statement piece for sure awesome potential
It’s a widow maker 😂😂
You always find such good deals I wish I had that luck😂
JEEEZO THAT SOUNDS
WICKED.
NICE ONE.
Hopefully u get the beast done and have some fun 👊🏻👊🏻👊🏻
Really nice find, gotta love those banshees cause you can do pretty much anything you want to them. Also its pronounced yoshi, like yoshi in super Mario lol. Great job and great video. That motor sounds really good and mean.
I kinda dig it man, im not crazy about the frame welded situation, extended swingarm on it and it's a hillclimb machine, out in cali we call those pipes Yo....Shee...Meee....Ra , I hear they're the best. Very pricey. Be cool if you could make a subframe removable, and put a bridge on those tubes sticking up for the seat mount. I feel like this one needs alot of time to be right, glad you took on this challenge its in good hands.
It’s alive and it’s a beast
Those pod filters, I’ve been told, definitely require jetting differently compared to the stock air box. Not sure if that’s causing it to run lean and show on the plug tip
#2 cylinder looked leaner than the rest to me. I'd love to peak inside those carbs.
Probably a burnt valve.
Never heard of a 600cc sport bike topping 180 but sprockets are like magic. I’m gonna guess that anything above 125-140, the front wheels won’t even be on the ground. Straight hovering lol.
Wow that’s a beast go careful brother 🤙
Id full send it lol....Ive seen more people in the last two years doing this, adding street bike engines on an atv, seen a few on marketplace around here in ohio. ive got an old blaster roller im thinking about cutting up and throwing a 74 amf harley 1200 engine on it. Gonna be a project for sure.
interesting project definitely a crappy engine choice you could pick up an 883 evo sportster engine for cheap
@@thecarse1447 it's been fun jigging this frame up so I could slug it and add pipe. Yeah tons of good harley engines I could go with but I would have to spend a decent amount for one. I've already got the 74 amf engine in the garage and didn't have to pay anything for it. Took it on trade a few years ago, triple tree was broke in two, and the rear was bent so the bike wanted to dog leg down the road, so using the engine from it is just cost efficient and should be plenty, it runs very good.
Oh dam let’s see what you get into now Joe 🤣🤣💪🏻
Dude... keep that
Hold tight on your first ride!! Looks very iffy!!
Might be something rigged up with that clutch cable it seems like everytime you let go of the clutch it stalls maybe something with the safety wire connected to the clutch?
Nice one bro I am building one right now with the same type of bike
Things gonna be sick fast ...
One heck of a contraption 😂
What a monster! I don't know for sure, but i'm wondering if the Katana frame is aluminum while the Banshee frame is steel and the previous owner tried to MIG weld the steel and the aluminum together. Again take it with a grain of salt but just make sure those welds are strong. I know that many people use a "TIG" welder on aluminum. Thanks for sharing your new find with us, good luck and stay safe.
The katana GSX600F was a air/oil cooled bike with a steel frame, they’re pretty cheap/simple/plentiful which is probably why someone used it for this. The faster/lighter/more powerful GSXR600 or Gixxer would’ve had the aluminum frame but also be liquid cooled so you’d have to make room for radiators
I cant wait to see this thing move!
Definitely make it look mint and keep it
The reason why 2 and 4 spark plugs were running lean is my guess is you should adjust the idle on those two carbs
That’s crazy but looks fun
Definitely a keeper that things sick!
That looks like a death trap 👀
those welds look suspect to me id dig in a make it a full project take care of the frame if its a keeper :) gotta be mad to ride it tho haha
Hey man I subscribed to see if your going to upload any more videos of the banshee looking forward to it man good buy$$
people just call them "Yoshi" pipes, like the character from mario world, long O
Or 12
3 videos in 3 days? Respect it
+1....Made my morning. Haha!
Can't wait man you know that thing is fast clean them fenders up needs ah smaller tank on there keep it up!!!!!!
You're smart, you executed that no start situation in record time. wow.
holy shit i didnt realize how big it was till u showed it in the garage lmao.
Same motor as in my katana..fast n smooth..nice find..
Ok what the hell?! I need one of these now!
Cool bike,the white tips on the plugs mean the mixture is too lean,the center cylinder gets hottest, may need carbs re balancing, and mix adjusted
It’s going to be a beast
That thing is awesome!!
What a find nice man.
i could be wrong but ive always heard yoshimura like pronounced yoshi from mario lmao
Always wanted to build one of these with the gsxr 750 engine
What a beast 🤘🏻
Are you going to have a part 2 on this one soon?
Just letting you know, all street bike motors even in neutral you have to pull the clutch in to start it if it has wires going to the clutch because it's a safety feature.
Looks like an older one, first Gen probably. Nice find. Weird but nice, have fun.
Finally some 4 inline bike
I'd love to take that beast for a rip!!! Lol sucks Yamaha and other atv brands never put grease fittings onto wheel and axle bearings. I'd check those out before ever going over 100 on it. They can be smooth but dry and when you go super fast it could heat up and lock up. You would prob smell the seals burning before that happened but still. I'd check the bearings up close. Sweet build though. Can't wait to see this thing moving!!! Sounds sick bro!!!
Love your videos.But why do you clean electrical parts with wd40.
Nice. For testing purposes use a zip tie to keep the clutch lever pulled in.
She be a sand drag race beast or even hill climber.
This could be a cool project with a little bit of tlc. 👍
Subscribed!!! I need to see this thing going! #SickProject!!!!!!!!! #FTW
Sport bike motors are different, you usually have to keep them choked for awhile while they warm up, and the sit around 4000 rpms while warming up and you adjust the choke accordingly