I think Bachmann gained a bad reputation in the 80's and early 90's, because almost all steam locomotives had wheel quartering issues and diesel locomotives' gears cracked, causing a loud click sound.
Just ordered my EZ Command controller yesterday,along with a couple of DCC Locomotives. Me and my father just picked up the hobby again after about 35 years...He's 82,I'm 40...He wantes multiple trains on one track,And sometimes the whole wiring bit can be a bit frustrating. So this is a blessing indeed!
I've known of the E-Z Command system since it first appeared in 2004 catalog. It was my first exposure to DCC. After that, I came to learn of DigiTrax, MRC, NCE, Lenz, and ESU. And, no offense to Bachmann, I've found the best of the bunch to be NCE. Of course, rather than an NCE throttle, I usually use my own iPhone and the WiThrottle app, all at my model train club.
Lovely Video clip! Forgive me for the intrusion, I would love your thoughts. Have you heard about - Januke Henatalie Formula (Have a quick look on google cant remember the place now)? It is a smashing one off guide for operating a DCC model railroad minus the hard work. Ive heard some amazing things about it and my work colleague after many years got astronomical results with it.
Nice! I'm planning to get that system. I have the bachann dcc Durango and silverton 2-8-0 locomotive, the bachmann southern 2-10-2, a 2-6-0, a 0-6-0, a Santa Fe 4-8-4 and 4x7 layout on the bottom bunk of my bunkbed!
Regarding running an analog locomotive on the E-Z Command system, I found that making an isolated dead-end siding that can be powered on and off via a switch (like the Atlas connector) to park the analog locomotive on is a pretty good idea.
Hi I am being given a HO Scale layout and am wondering about useing Bachnan EZ track not sure yet if I will need to replace any thing thank you for posting these videos Dave
Will someone please explain to me why the left handed crossover from Bachmann is very unpopular and on top of that when I was looking for them on ebay everybody was wanting the "Right Handed" ones instead. Why is this the case? I have a left hand no. 6 Crossover with two controllers item number 44575 and noticed that they are not in demand....why again I ask? Do people prefer going right instead LOL
Good video. I have a small dcc layout, Two separate tracks. We used flex track and the drop feeders are connected to separate bus wires. How do I connect to the two red wires from the controller? Where do I solder them? To the end of the bus wire or directly to the track. Which wire is negative, they are both red.
I am using a DCC on Board train and the EZ Commnad. For some reason the train won't activate or respond unless I push it, even then it only runs for a couple inches then stops. PLEASE HELP!
Hownottobuild This is my second account but I'm pretty sure I cleaned it when I posted that comment. I forget how I cleaned it though... Is there a certain way or thing I should use to clean it?
Help I got a DCC setup and it didn't come programmed to 3 ,according to your video here I'm getting a short circuit signal every time I put it on the tracks? any help would be appreciated.
I say some other videos and I just saw a video of MTH HO NKP 765 because I saw he runs with EZ Command Control and evening Lionel HO Polar Express because I just saw that video. I might get one soon.
This is a question I haven’t been able to find on UA-cam yet. So I just received a DCC locomotive from eBay, and I don’t know how to recode the locomotive from a multi digit code, to a single digit code using EZ command, since that’s all I have for DCC controllers. Is there a way to do that with it?
Let me see if I understand what your saying here Mr Bachmann trains Guy that at "video clip" 7:13 your saying that I may use a Power pack; speed controller and engine from another Bachmann train kit and it will allow me to operate that engine with a DCC controller track layout ?
@@agonquin I would think that would be true if running on lower speeds and old engines. I'll play around with it and let you know. I have some old junk engines I can try. Just powered up the EZ Command. Worked perfect. Running a Bachmann 2-8-0. (Ticked off, as I was told the engine had sound when I bought it! UHG). Anyway... If I run into issues, I'll share. Happy to be a test subject. LOL.
@@Curious_Skeptic LOL thanks ... I tried it too and it works but not going to run it for very long as I think that's the deal breaker other people had the issue with
@agonquin All my trains are packed up for who knows how long. 😞 I will say most everything I tried ran fine though. As you say, just down run for extended times.
@@carterbrown3807 Yeah it does, but I rarely use analog locomotives regularly on my current layout. But on my previous layout where I used the E-Z Command system I had an isolated siding that I could switch the power on and off to, for parking an analog locomotive on, so I wouldn't risk damaging the motor from letting it sit getting power for too long.
please bachmann answer this question: if the ez command controller says "light" instead of "function" will that button still work as the function button or am I gonna be ripped off and only be able to turn on the light. I was told I would have 10 functions able to control sound. can u answer this question please ASAP!? thank you
I got a DCC engine from u and I try programming it to a different address on a digitrax and I coundnt program it to the address 3002 and I really need help but I can't find any.
I have a digitrax dcc equipped athearn s12 I am trying to program it to run on both dcc and analog dc I have a ez command controller and I am unsure if it will kill my decoder to program it to 10 which is for analog locomotives
When I plugged mine in when I got it the light's went dim an it's getting hot . I cannot get it to do anything I believe I purchased one that's defective? Any answer you can help me out with?
You can control DC locomotives with this controller but to have the consist and lights and sound features you have to have a DCC decoder in the locomotive
Sorry you probably can never understand me I meant when the DCC controller is plugged in on the other side of the board can you plug in a regular controller and run non doc locomotives
Quick question if I turn on my controller to the Bachman Santa Fe train with a hopper with plastic coal an empty black small hopper and a red kaboose if I were to put a second train with remote and turned it on would the other train go as well?
It should be, I've actually connected some old Atlas track to the Bachmann E-Z track, and everything works just fine on both. The power connector will be different for the Atlas track, but it shouldn't be difficult to make an adapter.
The other day i was running my Bachmann DC Chattanooga engine and the smokestack started melting! it is not a older engine about a year old I had it on low power and running with smoke. but even without smoke, it will still get hot! I am afraid to run it. any advice?
I have the Bachmann DCC EZ command control center (item #44932), which does not have the option to connect accessories. So, how to connect remote turnout red wire.
That I know; I've got one locomotive that came with the controller that has a decoder. I may get another DCC-equipped locomotive as well, and then attempt to upgrade on certain models.
Eric Trostin Yep, the locomotive actually runs pretty well. I currently have four DCC-equipped locomotives: two are Bachmann (BNSF GP40-2 and ATSF FT-A Warbonnet), one is a Life-Like Proto 1000 F3A (ATSF blue/yellow) and one is a Walthers Trainline Dash 8-40BW (BNSF Warbonnet); the latter two use TCS decoders.)
Now here's a million-dollar question. If you get 2 of these and you have 2 DCC equipped engines can 2 people be able to driving the engines on one layout?
Yes, it is possible to have more than one operator running a train at one time. For this, you can use our E-Z Command® 44907 Walk-around companion. One of the operators can use this, while the other can use the standard E-Z Command® controller.
You can only use 1 EZ Command Station. If you want to have 2 control panels, you have to use one command station and one walk around companion. If you try to use 2 Command Stations they will cause a short circuit.
Hi Phil, this sounds like you have a short somewhere on your layout. Check your track connections and ensure they're tight and correctly aligned, look for any rolling stock that might be derailed, and check to make sure that no metal items are making contact with the rails (other than wheels).
Perhaps I missed it, are the DCC encoders that come with the locos in the set compatible with other systems like will my bachmann loco work on a digitrax system?
Hello,the plug for my ez command track wire ,the plug that connects into the ez command itself broke does bachmann sell replacment track wires for the ez command?
@BachmannTrainsUSA it worked! Thanks! Plus you can use any of those analog/speed controllers? Because I'm working on getting one to add some DC engines to it, but one at a time
This video is surprisingly very helpful! Thank you very much bachmann for your (sometimes) amazing locomotives and (always) amazing tutorials
Bachmann has always worked for me with no problems.
@@jdc121 same, All my stuff is Bachmann and I have no idea why everybody hates on Bachmann
@@robbykoopman5559 fr
I think Bachmann gained a bad reputation in the 80's and early 90's, because almost all steam locomotives had wheel quartering issues and diesel locomotives' gears cracked, causing a loud click sound.
Childhood Memories! I used to watch this video all the time when I played with my HO Thomas And friends trains.
Just ordered my EZ Command controller yesterday,along with a couple of DCC Locomotives.
Me and my father just picked up the hobby again after about 35 years...He's 82,I'm 40...He wantes multiple trains on one track,And sometimes the whole wiring bit can be a bit frustrating. So this is a blessing indeed!
I've known of the E-Z Command system since it first appeared in 2004 catalog. It was my first exposure to DCC. After that, I came to learn of DigiTrax, MRC, NCE, Lenz, and ESU.
And, no offense to Bachmann, I've found the best of the bunch to be NCE. Of course, rather than an NCE throttle, I usually use my own iPhone and the WiThrottle app, all at my model train club.
I just bought the bachmann DCC starter set that comes with 2 engines, it's freaking awesome!
Lovely Video clip! Forgive me for the intrusion, I would love your thoughts. Have you heard about - Januke Henatalie Formula (Have a quick look on google cant remember the place now)? It is a smashing one off guide for operating a DCC model railroad minus the hard work. Ive heard some amazing things about it and my work colleague after many years got astronomical results with it.
Was it the commander?
Just got one of these today, Great product Bachmann! 👍
Nice! I'm planning to get that system. I have the bachann dcc Durango and silverton 2-8-0 locomotive, the bachmann southern 2-10-2, a 2-6-0, a 0-6-0, a Santa Fe 4-8-4 and 4x7 layout on the bottom bunk of my bunkbed!
That is awesome!
The decoders are NMRA compliant and will work with any NMRA compliant DCC system.
Will the atlas lok sound work? I have been planning to buy a c424
(with no intention of disrespect) does this work with other items that aren't bachmann?
thanks in advance :)
The system will work with any NMRA compliant DCC decoder.
+bachmanntrains ok, great! thanks for your service!
You Guys removed the DC controller Plugin.
I run Bachman and I love everything about it,I run n scale and I love it won't sell or trade for the,world.
I'm old school DC, Bachmann DCC made the switch easy for me to understand. In 1953,Tokyo Japan, we bought our first HO RxR by selling coal and brass.
Im getting my first loco (Single $119 Union Pacific NZD) From Bachmann! Thanks Bachmann!!
It doesn't have any sound tho, :( But im happy still and should be grateful. :)
What is the Rail Height Code for your track, I would like to use standard sections with the ez track, I have code 83 and way more code 100
Our E-Z Track® range is code 100
i have an analog DC locomotive runing with this E-Z digital controller, but the speed is very slow. do you know the reason?
Regarding running an analog locomotive on the E-Z Command system, I found that making an isolated dead-end siding that can be powered on and off via a switch (like the Atlas connector) to park the analog locomotive on is a pretty good idea.
I don't have this one. but wanted to check if you knew anything about a DC master module if so please let me know.
This looks straightforward and simple
You can probably get one by contacting the Bachmann parts department
Can you use this with bachmann sound decoders
Yes
How do I control the sounds? The one I want to buy has the sound value but I am not sure how to do the sounds on the controller?
Use the function button
Hi I am being given a HO Scale layout and am wondering about useing Bachnan EZ track not sure yet if I will need to replace any thing thank you for posting these videos
Dave
Just purchased this! A bit late to the party. Fingers crossed all works. Even havev Bachmann Steam dcc Spectrum unit. Can't wait.
Will the EZ companion # 44907 ever be available again ? If so when and where can I get one ?
Yes it is here :www.walthers.com/e-z-command-accessories-walk-around-companion
Will someone please explain to me why the left handed crossover from Bachmann is very unpopular and on top of that when I was looking for them on ebay everybody was wanting the "Right Handed" ones instead.
Why is this the case?
I have a left hand no. 6 Crossover with two controllers item number 44575 and noticed that they are not in demand....why again I ask?
Do people prefer going right instead LOL
Good video. I have a small dcc layout, Two separate tracks. We used flex track and the drop feeders are connected to separate bus wires. How do I connect to the two red wires from the controller? Where do I solder them? To the end of the bus wire or directly to the track. Which wire is negative, they are both red.
I am using a DCC on Board train and the EZ Commnad. For some reason the train won't activate or respond unless I push it, even then it only runs for a couple inches then stops. PLEASE HELP!
Daniel McDonald
Have you cleaned the tracks and the wheels
Hownottobuild This is my second account but I'm pretty sure I cleaned it when I posted that comment. I forget how I cleaned it though... Is there a certain way or thing I should use to clean it?
Thumbs up if you are about to go use YOUR E-Z Command Control System! Go E-Z Command!
When you connect the 2nd controller (DC) will older locos still be prone to overheat and cause issues
Help I got a DCC setup and it didn't come programmed to 3 ,according to your video here I'm getting a short circuit signal every time I put it on the tracks? any help would be appreciated.
riverlifeva maybe it’s the train
The problem is in the Locomotive.
Twelve years ago? It sounds like this video was made in the 1950’s-trumpets and all-I couldn’t stop laughing!
Lolz. I love it! So appreciate!
I say some other videos and I just saw a video of MTH HO NKP 765 because I saw he runs with EZ Command Control and evening Lionel HO Polar Express because I just saw that video. I might get one soon.
This is a question I haven’t been able to find on UA-cam yet. So I just received a DCC locomotive from eBay, and I don’t know how to recode the locomotive from a multi digit code, to a single digit code using EZ command, since that’s all I have for DCC controllers. Is there a way to do that with it?
You just normally program it using the Controller and you don’t need to know the previous code
Let me see if I understand what your saying here Mr Bachmann trains Guy that at "video clip" 7:13 your saying that I may use a Power pack; speed controller and engine from another Bachmann train kit and it will allow me to operate that engine with a DCC controller track layout ?
Yes!
@@Curious_Skeptic because I saw others mention it will burn out DC engines
@@agonquin I would think that would be true if running on lower speeds and old engines. I'll play around with it and let you know. I have some old junk engines I can try. Just powered up the EZ Command. Worked perfect. Running a Bachmann 2-8-0. (Ticked off, as I was told the engine had sound when I bought it! UHG). Anyway... If I run into issues, I'll share. Happy to be a test subject. LOL.
@@Curious_Skeptic LOL thanks ... I tried it too and it works but not going to run it for very long as I think that's the deal breaker other people had the issue with
@agonquin All my trains are packed up for who knows how long. 😞 I will say most everything I tried ran fine though. As you say, just down run for extended times.
will the E-Z command work with DC locomotives
Milepost 241 Productions no
Haha late reply but it does, I use dc locomotives white my system
@@carterbrown3807 Yeah it does, but I rarely use analog locomotives regularly on my current layout. But on my previous layout where I used the E-Z Command system I had an isolated siding that I could switch the power on and off to, for parking an analog locomotive on, so I wouldn't risk damaging the motor from letting it sit getting power for too long.
Yes but don’t run the DC engine on the DCC track for too long. It will damage the motor of the locomotive if ran for more than an hour
It can but it’s not healthy for the motor of a DC locomotive
I got the Bachman Thomas whit Annie and carabel and that one is my sons first Bachman
please bachmann answer this question: if the ez command controller says "light" instead of "function" will that button still work as the function button or am I gonna be ripped off and only be able to turn on the light. I was told I would have 10 functions able to control sound. can u answer this question please ASAP!? thank you
Yes
I got a DCC engine from u and I try programming it to a different address on a digitrax and I coundnt program it to the address 3002 and I really need help but I can't find any.
Perhaps call Digitrax?
I have a digitrax dcc equipped athearn s12 I am trying to program it to run on both dcc and analog dc I have a ez command controller and I am unsure if it will kill my decoder to program it to 10 which is for analog locomotives
When I plugged mine in when I got it the light's went dim an it's getting hot . I cannot get it to do anything I believe I purchased one that's defective? Any answer you can help me out with?
Hi there, please email our service department at service@bachmanntrains.com
When you say "One Analog Loco", do you mean one DC engine? If so, you're a life saver!
yes that's what it means
Well that means i can run my old athearn blue box bnsf number 2099
I know this is old but I cannot find that black interconnecting cable. it wasn't in any of my sets I have from Bachmann is it sold separately?
I would like to know where to get this as well
What dc locomotives can I do the same with this controller as like the other locomotive that was shown in this video?
You can control DC locomotives with this controller but to have the consist and lights and sound features you have to have a DCC decoder in the locomotive
Is that what comes in the controller set
Do Bachmann trains with DCC Sound Value On Board work with the E-Z Command Center?
Yes
No - it is DCC
Good joke
Hi buddies
With the regular controller can you run non-Dcc locomotives or not
Sorry you probably can never understand me I meant when the DCC controller is plugged in on the other side of the board can you plug in a regular controller and run non doc locomotives
Quick question if I turn on my controller to the Bachman Santa Fe train with a hopper with plastic coal an empty black small hopper and a red kaboose if I were to put a second train with remote and turned it on would the other train go as well?
What
Is it compatible with Atlas track?
It should be, I've actually connected some old Atlas track to the Bachmann E-Z track, and everything works just fine on both. The power connector will be different for the Atlas track, but it shouldn't be difficult to make an adapter.
Does anyone know if it is possible to convert the locomotive in the rail chief set to dcc?
All locomotives as long as they have a DCC decoder or you have a DCC socket with a DCC decoder that you can install will work with this controller
The other day i was running my Bachmann DC Chattanooga engine and the smokestack started melting! it is not a older engine about a year old I had it on low power and running with smoke. but even without smoke, it will still get hot! I am afraid to run it. any advice?
All the analog locomotives overheats when you are using the ez command
Does anyone knows if bachmann locos will work with kato unitrack?
Hi Ryoten99, yes, our HO and N scale locomotives will work on Kato Unitrack!
@@BachmannTrainsUSA thank you
@@Ryotenian7826 All trains will work with all track as long as it’s the same scale
@@BachmannTrainsUSA Hi, will it work with Atlas tracks too ?
@@michaelhorath6851 Yes, all Bachmann models are built for use on any standard HO scale track system.
Does all of this work for N scale trains too?
Yes
I look forward to giving this system a try!
Can we change from the default 28 speed steps to 128 speed steps using this controller ?
No
trying mine tomorrow, thanks for the vid 👍
I have the Bachmann DCC EZ command control center (item #44932), which does not have the option to connect accessories. So, how to connect remote turnout red wire.
Is this controller also good for large layouts with a very long distance?
You will need to purchase the Bachmann DCC 5amp booster for large layouts.
Do yiu have to us the modern track.
If you were asking if you have to use modern track as long as it’s clean and conducts power well and can be hooked up to the controller it will work
Can u consist a DCC lead engine with a DC engine? I'm switching over to DCC and I'm trying to figure out which system to use.
No.
Thanks. I ordered my EZ command controller today!
Can you use Atlas locomotives for this?
Bachmann's E-Z Command should be compatible with most other brands of locomotives.
do dcc controllers work on dc tracks
All track is interchangeable
@@user-sd7qo7qe4v thanks
Can you controlled sound, like the horn or bell?
Yes
I bought a bachmann engine but it won't run. It can receive power but its wheels won't move. Please help
Contact our Customer Service Team, toll free in U.S./Canada, 800-356-3910, ext. 304 or 305.
The 2 track power wires comes with the controller set
Ok ok ok I want this now with a Dcc Bachmann gg1.
Actually they do have a Bachmann DCC GG1 I made a video on my channel of when I bought one
What if you done know the address number and you bought the dcc train used.
You can program it so that way it’ll be with a new DCC address regardless of what the previous one is
Can I use any locomotive that has any decoder?
Yes, as long as It is to the correct scale
7:38 so how does this make any sense running a DC engine with a DCC engine? Is the DC engine running at enough track power to power the DCC engine?
I might get this in the future; I currently run all-DC trains and I can probably upgrade my layout using this.
It's not easy, you need decoders to use ez command, it was really hard to install the decoder into my analog trains.
That I know; I've got one locomotive that came with the controller that has a decoder. I may get another DCC-equipped locomotive as well, and then attempt to upgrade on certain models.
Yeah, and nice about the dcc train, Bachmann???
Eric Trostin
Yep, the locomotive actually runs pretty well. I currently have four DCC-equipped locomotives: two are Bachmann (BNSF GP40-2 and ATSF FT-A Warbonnet), one is a Life-Like Proto 1000 F3A (ATSF blue/yellow) and one is a Walthers Trainline Dash 8-40BW (BNSF Warbonnet); the latter two use TCS decoders.)
That's good, I have four, too!!!
Pretty late but I want to get a dcc ready usra 2-8-2 loco and how do I install a decoder?
hey, bachmanntrains, do you know which manufacturers HO Scale DCC locomotives are compatible with this system?
Basically all of them except MTH
@@user-sd7qo7qe4v ok 👍
Can I hook up my switch track wires to it?
How exactly would one activate the sounds on a dcc model equipped with sound with this controller?
Do you need a decoder in every dcc locomotive to be able to use it with this remote
Yes, if you want to run in DCC. You can use address 10 to run a non DCC locomotive.
Please help for speeding. How do chance to low and high speeding. These Locomotive was fast need to calm smooth slow?
Now here's a million-dollar question.
If you get 2 of these and you have 2 DCC equipped engines can 2 people be able to driving the engines on one layout?
Yes, it is possible to have more than one operator running a train at one time. For this, you can use our E-Z Command® 44907 Walk-around companion. One of the operators can use this, while the other can use the standard E-Z Command® controller.
Does the black connecting wire come with the DCC controller? 7:21
edit: OMG HE HAS GREEEN 4501? 9:32
Thats 722
It’s been 2 years I’ve matured and you don’t have to respond
I can't wait to try this!
if I have 2 dcc contorlers can 9 run on 1 and 9 run on the other
You can only use 1 EZ Command Station. If you want to have 2 control panels, you have to use one command station and one walk around companion. If you try to use 2 Command Stations they will cause a short circuit.
if you sith train will it run
Question, when it says the analog loco, can I run dc and dcc with this?
You can run one DC locomotive on address 10
my bachmann ez controller started blinking and nothong will run on my layout.
Hi Phil, this sounds like you have a short somewhere on your layout. Check your track connections and ensure they're tight and correctly aligned, look for any rolling stock that might be derailed, and check to make sure that no metal items are making contact with the rails (other than wheels).
i just got a switch track today and do not know wat to do and i got a dc controller and this is my first switch track wat do i do
Perhaps I missed it, are the DCC encoders that come with the locos in the set compatible with other systems like will my bachmann loco work on a digitrax system?
+The Lowmein yes i have a bachmenn Alaska locomotive DCC and run it on my digitrax system
thanks
Is there any way to connect the EZ Command to a computer? Would the I/O port work?
I don’t use an old DCC controller but I’m planning to have to have this i use EZ track
Hey bachmann what is an i/o port used for this type of power pack????
The IO Port is ONLY for connecting our E-Z Command Walk-Around Companion. Plugging anything else into this port may damage the controller.
Bachmann dónde puedo conseguir más modelos de trenes?
Hello,the plug for my ez command track wire ,the plug that connects into the ez command itself broke does bachmann sell replacment track wires for the ez command?
Yes
is it only for HO, or can I use it with N scale?
Can it be used with DC
Bachmann Thomas Works with ez command?
No - Thomas models are not Digital Command Control
my controller quit working , I unplugged it for 30 mins and the power light will flicker a little and then nothing I used it for 10 mins
Does the decoder work on other model trains, not just Bachmann?
Would this work with Hornby DCC locomotives
Yes all decoders work with each other, as long as they say "Meets NMRA Standards" on the box.
Does this exist for n scale?
The power can be run into into N scale track
if you hook up a analog controller with the dcc command centre, could i use 2 analog locomotives and 9 dcc locomotives?
it just allows button 10 to control a 10th digital locomotive.
young1nicholas aw well thanks for the info :)
Oh my… the nostalgia!
I just got that dcc controller and it doesn’t work and my engines make weird noises when on the track and the dcc doesn’t work on the analog
Got mines yesterday. When trying to make it move after setting up, the engine won't move. Can you help?
Make sure you have the correct locomotive selected using the address keys. Most locomotives will be set to #3 by default.
@BachmannTrainsUSA it worked! Thanks!
Plus you can use any of those analog/speed controllers? Because I'm working on getting one to add some DC engines to it, but one at a time
My dcc controller keeps on not showing the stop light I’m doing what this tells me too and it’s not working