Lowes, home depot....online. All hoses/garden hose nozzles and pressure washers should have these installed on them. Makes life so much easier, especially if you are one to use it often. Got mine at Lowes, here's link low.es/37BctVd please keep in mind garden hose connections are not the same size as pressure washers (and pressure washer ones are more heavy duty) hope that helps 👍👍👍
Hey Joshua, if your pressure washer features an M22 threaded connection at the end of the pressure washer gun (usually where gun attaches to lance) you can install our 81240B - Threaded Direct Adapter into the M22 fitting on your gun, then attach our 81240F - SS Quick Disconnect Coupler, Female to the ¼” end of the 81240B fitting. This setup will allow you to quick connect your BOSS Foam Cannon directly to your pressure washer gun via the 81240F - SS Quick Disconnect Coupler.
Hi Bart, not sure we have a start to finish wash with the BOSS Foam Cannon but did you have any specific questions we could help answer? And you'll just want to fill the reservoir with water and run it through the cannon until the water turns clean.
Those are our auto-mix metering tips, they take the guess work out of mixing your car wash concentrates and do it for you. Simply pour our Foaming Surface Wash into the reservoir or attach the 35oz bottle directly to the foam cannon and let the cannon do the rest.
Hey Rolando, the links for the BOSS Foam Cannon and 2,200 PSI Pressure Washer are in the description of the video. Are you looking for the links to different products?
Would love to see you guys send me one i detail alot of semi trucks I would give you guys alot of feedback I detailed about 30 to 50 semi trucks a week
Maybe this is just me, but this video, in my opinion, shouldn't have been more than 2 minutes long. But maybe this was more in depth for those truly new to this type of setup 🤷♂️
Hey Tony, thanks for the feedback! As you said, we wanted to provide sufficient info for someone just looking to get into washing with a foaming system.
No mention in the video or the user manual on how to adjust the knobs.
Hello! The knob on top of the cannon will adjust the soap pick up rate, with all the way left being no soap and all the way right being full pick up.
@ Griot's Garage. Thanks Sam for your thorough explanation of the BOSS Foam Cannon and pressure washer setup.
Happy to help!
2nd from smokey California
Hello from Tacoma! Hope you're staying safe in California
Who's '57?
How can buy all those coupler sets?
Lowes, home depot....online. All hoses/garden hose nozzles and pressure washers should have these installed on them. Makes life so much easier, especially if you are one to use it often. Got mine at Lowes, here's link low.es/37BctVd please keep in mind garden hose connections are not the same size as pressure washers (and pressure washer ones are more heavy duty) hope that helps 👍👍👍
Hey Joshua, if your pressure washer features an M22 threaded connection at the end of the pressure washer gun (usually where gun attaches to lance) you can install our 81240B - Threaded Direct Adapter into the M22 fitting on your gun, then attach our 81240F - SS Quick Disconnect Coupler, Female to the ¼” end of the 81240B fitting. This setup will allow you to quick connect your BOSS Foam Cannon directly to your pressure washer gun via the 81240F - SS Quick Disconnect Coupler.
@@GriotsGarage thank you... and ordered the pieces just about 30 mins ago.
Have you measured the actual gpm? Not ar blue spec but the actual gpm out of the various tips?
Do you have a video of a complete car wash with the BOSS Foam Cannon including how to clean the Foam Cannon afterwards like it says in the manual?
Hi Bart, not sure we have a start to finish wash with the BOSS Foam Cannon but did you have any specific questions we could help answer? And you'll just want to fill the reservoir with water and run it through the cannon until the water turns clean.
This turned into more of a pressure washer how to. How and where do those little fucking tips go??
Those are our auto-mix metering tips, they take the guess work out of mixing your car wash concentrates and do it for you. Simply pour our Foaming Surface Wash into the reservoir or attach the 35oz bottle directly to the foam cannon and let the cannon do the rest.
@@GriotsGarage Thanks! love the wash and sprayer bottle
I have one , you need at least 1.8 GPM to get good foam.
1st WA State!
WA State represent!
Awsome products im going to be ordering one very soon
Thank you! We know you're going to love it!
What are the links for the items?
Hey Rolando, the links for the BOSS Foam Cannon and 2,200 PSI Pressure Washer are in the description of the video. Are you looking for the links to different products?
Now I need a garage
It can be done in your driveway too!
4th from PA
Hello in PA, thanks for watching!
3rd from Kentucky
Hello from the PNW!
Would love to see you guys send me one i detail alot of semi trucks I would give you guys alot of feedback I detailed about 30 to 50 semi trucks a week
Maybe this is just me, but this video, in my opinion, shouldn't have been more than 2 minutes long. But maybe this was more in depth for those truly new to this type of setup 🤷♂️
Hey Tony, thanks for the feedback! As you said, we wanted to provide sufficient info for someone just looking to get into washing with a foaming system.