Making Metal Letters using Rebar for a Sign - Without Heat - Rebar MIG Welding Project

Поділитися
Вставка
  • Опубліковано 29 жов 2024
  • This is how I make metal letters using rebar to be used in a metal sign. I bent this rebar lettering without heating it before bending the rebar. These sorts of things make great DIY creative garden art or wall art, it does not have to be a rebar advertising sign like I made.
    I plan to leave the "Gavin Clark DIY" sign on my workbench where it is now, it will get quite a beating from sparks from grinding and getting hit by steel at times, and the bench does get wet when it is raining and the wind is blowing, so even though I have sprayed it I do expect it to rust over time, and it may need a bit of maintenance if I decide the rust does not add to the rustic look of the sign. I enjoy making metal letters is a nice MIG Welding Project using rebar.
    I coated this with Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray and then put a topcoat of Semi-Gloss Clear Coat
    The main tools used were a MIG welder, angle grinder, drill, bench vise, and swivel “V” magnets.
    The big rebar is 18mm, and the small rebar that I made the letters with is 12mm or (1/2 inch rebar)
    Tools / Supplies, I often use are.
    Marking out Tools
    Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
    Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
    Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
    Locking Pliers - Vise Grips
    MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
    Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
    Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
    KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
    Magnets
    Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
    Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
    “L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
    My camera set-up.
    Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
    VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
    Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
    The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
    As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
    ►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJog...
    Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
    Hope you found something of use in my video or at least found it entertaining.
    Gavin Clark DIY

КОМЕНТАРІ • 167