DBrand Darkplates for PS5 - Temperature Tests of the Internal System & SSD Expansion
Вставка
- Опубліковано 30 чер 2024
- NASCompares Free Advice Area - nascompares.com/contact-us/
DBrand Darkplates Review - Are They Good Or Bad For Your PS5 SSD & System Temperatures? - nascompares.com/review/dbrand...
Video Chapters
00:00 - Introduction to the @dbrand Darkplates 2.0
01:20 - Unbxing the dBrand PS5 Darkplates
02:20 - Why I am Conducting these Temperature Tests
05:20 - How the dBrand Darkplates & the Original PS5 Plates Comare in Design
06:45 - Why SSD Temperatures in the PS5 Are a Concern?
10:10 - How the Tests were set up
11:05 - dBrand vs Original Test #1, Heavy Write
12:35 - dBrand vs Original Test #2, Far Cry 6
14:05 - dBrand vs Original Test #3, Demon Souls
15:35 - dBrand vs Original Test #4, Heavy Read
17:05 - Conclusion & Verdict
17:40 - The Results
Vulnerabilities And Exploits On Synology & QNAP NAS - Stay Updated! - nascompares.com/2021/05/26/vu...
This description contains links to Amazon. These links will take you to some of the products mentioned in today's video. As an Amazon Associate, I earn from qualifying purchases.
Thanks for watching. Do you still need help? Use the NASCompares Free Advice section above. It is my free, unbias community support system that allows you to ask me questions about your ideal setup. It is NOT a sales platform, NOT a way to push hardware you don’t need and, although it is just manned by me and might take a day or two for me to reply, I will help you any way I can. Below are some more popular guides.
NAS Buyers Guide - Get It RIGHT First Time - nascompares.com/2021/01/01/na...
Synology DSM 7 Review - ALL PARTS - nascompares.com/synology-dsm-...
Synology DSM 6.2 vs DSM 7.0 - • Synology DSM 7 0 vs DS...
Synology DSM or QNAP QTS in 2021/2022, Part I - nascompares.com/synology-vs-q...
Synology DSM or QNAP QTS in 2021/2022, Part II - nascompares.com/synology-vs-q...
Synology DSM or QNAP QTS in 2021/2022, Part III - nascompares.com/synology-vs-q...
Mesh Routers VS Powerline Adapters And Wi-Fi Extenders - Buyers Guide 2021 - nascompares.com/2021/03/08/me...
Synology NAS Unofficial Memory Upgrade Guide - nascompares.com/2020/04/06/sy...
How To Switch From Google Photos And Drive To Synology NAS - A Step By Step Guide - nascompares.com/2021/01/17/ho...
This description contains links to Amazon. These links will take you to some of the products mentioned in today's video. As an Amazon Associate I earn from qualifying purchases.
Amazon NAS Solutions - amzn.to/37oX47P
Or follow and speak with Robbie directly on his Twitter - / robbieonthetube
Still not enough? Then why not visit and subscribe to our blog. Updated regularly it gives you a far wordier version than the NASCompares UA-cam, as well as provide you with hints and tips on how to make the most of your hardware here www.NASCompares.com
Don't forget to visit them on Facebook to enter prize draws, giveaways and competitions, as well as hear about the latest news, NAS releases & offers - / nascompares - Наука та технологія
The Dbrand's Darkplates contains the entire Cease & Desist Email in Binary sent from Sony.
I did NOT know that! I'll have a check etc, but if that's true, that is some top tier brass! Respect. Cheers for sharing
Yes for the first plates why they had to change them now they can't do anything about it.
@@nascompares dbrand published the letter
There’s awesome for that. Especially reading the product description on their website, it always make me laugh.
@@nascompares k
Thank you for making the video! You mentioned great points there and glad you are going to do more comparisons, especially on the Sabrent Custom Heatsink based on how it’s designed and how it can potentially be more affected based on its design. Once again great work man and looking forward to the next video!
Really appreciate the detailed reviews do you !!! Waiting for my DBrand plates during this next March drop. Can’t wait for next video on the tests with and without M.2 cover, while still using the Dark Plates.
Pretty cool test results - I bought the DP 2.0 for the aesthetics but glad to see it didn't make the cooling worse in the process.
ur comment is 3 months old, any negative changes after using the dbrand plates? I was curious if the vents will cause problems with dust buildup or damage some parts inside the PS5
@@koniredfox8640 I haven't noticed any negative side effects yet - nor clogged vents. Luckily the plates are easy to remove and the vents easy to access - so should you experience different results, cleaning should be a breeze.
@@koniredfox8640 YOUR comment is 3 months old, now, have you pulled the trigger on this purchase, yet? BTW, PS5 owner for almost two years, now, and I can tell you that you're going to get dust inside the system regardless of which plates you use.
@@ITX-EcoClassyou comment was 3 months old 3 plus 1 months ago how does that make you feel
@@Sketchi_ Like I just got off of brianstalter's mom after pulling an all nighter. Have a good day, sir, and thanks for asking - appreciate ya 👍🏼🙏🏼
Been waiting for someone to temperature test the 2.0 plates. Thanks!
Absolutely fantastic well done. Look forward to more tests on this subject 🙌
Cheers buddy
@@nascompares How/Where did you get the classic Playstation logo on the center strip near the power and eject buttons?
Thank you for doing this. Very good review with lots of fantastic well presented information.
Thank you for making the dbrand Darkplate 2.0 temperature test vid.
I have similar set up with black Darkplate 2.0 & Seagate Firecuda 530 2TB M.2 SSD with factory heatsink on my PS5. Indeed just shaved off 2 - 5C° and doesn’t affect much, but certainly good to know dbrand Darkplate 2.0 does its job ever slightly to lower the C°. Anticipating next test with Sabrent PS5 heatsink cover with Darkplate 2.0, may be also try Elecgear and PNY heatsink too with the temperature test with Darkplate 2.0? Keep up the good work!
If you already went that far with the 2TD. Might as well just pay the price for removed 5C°/41F° over the long term.
Only legit video with testing on ps5 faceplates! Thank you, video definitely deserves more views !💪🏽
love this review. i ended up not getting the dbrand plates due to $$$$ for cooling value and just opted for black bubble vented plates that allow my ps5 rgb ring lights on the fans shine through. thank you for the review!!!
Thank you for making the video!
Dbrand plate looks promising. I can't wait for more testing.
Another useful analysis, thank you!
The ssd card cover is important to keep on. The cooling system actually blows cool air into the ssd card housing from what playstation has stated.
They must be wrong then if the ambient is hotter with it on.
@@fixyourgame6157 it’s also to keep dust out
GRAUGEAR Metal Heat Dissipation Cover looks like a good compromise of leaving the cover on
Great results. I bought DarkPlates 2.0 anyways for looks & the vent (just for the peace of MY mind knowing that there’s “better” airflow)
Thanks for this!
Very good test Brilliant!!!
Love these PS5 videos. Thank you for making them.
Thanks for the super informative comparisons. I watched all 3 parts of this video. However, I do wish that you had a video showing temperature difference between the original Sony’s PS5 Plate vs Dbrand’s PS5 Darkplate 2.0 with Sabrent M.2 NVMe Heatsink installed with Rocket 4 Plus or any other SSD installed along with Sabrent Heatsink. So basically it would be interesting to see how much cooler temperatures can be achieved on Darkplate 2.0 with SSD + Sabrent Heatsink installed compared to the original PS5 plate.
I literally do not understand the comments from people saying they’re surprised that the dark plates even work. Just because the original PlayStation plates was designed around negative pressure does not take away the physics of having more airflow come through the system to cool it off. I’ve had my Darkplates for about a week now and there is a drastic difference in cooling. I’ll play disc games and when I take my disk out to put it away the disc is much much cooler than it was using the old plates. Plus the air that comes out of the PlayStation is much cooler. I’m a Sony fan boy but even I can recognize that there is a flaw in the original plates. Negative pressure aside, the physics of having more airflow will always have better results. It’s common sense and I’m surprised by the lack of it by people‘s blind following to Sony‘s design philosophy…
Good point. I actually did this before my Darkplates came in. I used an external fan.
The Darkplates come with a standard dust filter on each ventilation hole that you would find on any PC set up and they are easy to remove and clean so dust shouldn’t be an issue with standard cleaning. I would rather my PS5 run much cooler with slightly more dust exposure over 5 years than much hotter with minimal dust exposure. Look up gamer nexus thermal test on PS5. The PS5s memory temperature runs right at the max temperature threshold of 90 Celsius, while having to plates dropped that temperature by 5 Celsius across the system, which over hours/days/years of having would have a large impact because of how close the system was running right on the edge of its thermal envelope. 90 Celsius to 85 Celsius is much different than 80 Celsius to 75 Celsius. Just my two cents.
I can honestly say my disk has never been hot when I have removed it but it should be obvious adding more holes doesn't improve cooling. There is a reason they designed the console the way they did and I'm gonna trust the engineers who spent years testing and perfecting cooling over a cheap plate maker 😂
great video
Got ya self a new sub bro
I bought one of the Sabrent heatsinks that replaces that metal cover, I'm not sure if it works well but I haven't had any issues (also using it with a sabrent drive). I like how it looks, got it for $16.99 Canadian, normally they are $25. Forgive me if you have already tested it, but I just came upon this video when researching darkplates 2.0.
*edit* i found you have a video on it already, nice!!!
I have to say that I have just picked up these plates with the light strips (green) and central cover. Its more for aesthetics really as I'm not a fan of the 'collar' on the original plates, but hey it is down to each individual I suppose. But if there are any additional benefits like dropping a couple of degrees, then all the better. Have the Samsung 980 PRO SSD with the heatsink as well so hopefully will get similar results. But great video sir! Like sent ;)
I have the same set up as yours but i just bought the DP today (haven't even open my PS5 yet lol) any negative effects or downsides with the plates and the M.2 SSD in which regards to temp? your response is greatly appreciated.
I dont like the dark plates because they are round. I prefer harsher edges.
I like the rounded panels better personally. But I use the console on its side and the stock stand wobbles and slides, so I had to get get stock style ones again to fit a proper stand. Tried only using the bottom side original, but it looked odd with the rounded one on top.
Finally got an Elecgear heatsink (still shopping for SSD's)... I wonder how the darkplates 2.0 work with that heatsink...
Nice video! Love those plates but I barely pulled the trigger on my $120 Atom50 1tb ssd. Running it with just the stock heat spreader and no cover. Pretty happy with not having to bounce PS5 games between internal and external.
The thing here is, it'll target certain temps. So the question here should be, is it quieter with the Dark Plates?
Take the silver metal protective covers off of the fans as well. That's where a lot of blockage comes from.
You're doing the Lord's work with these PS5 videos.
I think the vent holes themselves could have been made to look better instead of like a target/bullseye.
How did you get the Ps2 logo for your ps5 front plate ??? 😮
Did you make the ssd metal plate on plate off comparison video? Trying to find it. Thanks
M2 slot does get air flow, if you look just above the connector for the M2 you will see a gap for air flow.
I found a vented SSD cover for my corsair 2TB and will be using the original external plate covers till i either see a price drop or more significant temp drops before i spend 60-80 dollars on a vented external plate.
What about a test with and without the mesh over the fan holes?
A bit late to the party. But i think an overlooked thing on the PS5 is those metal grills over each side of the fan. Which i assume are mainly there for protection, and perhaps catching large clumps of dust. But at the same time, i thiink it obscures a percentage of the fan itself, and is another obstacle for air to travel through.
I removed mine completely and screwed the fan back in without them, along with the dbrand case with filters on. It's probably a minimal thing in reality, but I find it opens up the fan a bit more to airflow. As long as the console is in a safe spot and is cleaned regularly, it wouldn't hurt, right?
I love that the binary inside the dbrand is the sony C&D letter translated haha
What PS sticker is on the front of the system? Love the look!
The rounded edges is the selling point alone. Idk why Sony chose the design they did
where'd you get the little PS sticker for the middle portion of the console?
Nas, can you use the original PS5 stand plate for those covers?
can you do a video test with the original sony plate on the intake of the fan and the dbrand on the exhaust side? im interest on knowing if keeping the sony back pressure but maximizing the discharge pressure make a different outcome.Also would be interesting to see dbrand vents closed about 30% allowing a little more air directed through the front of the playstation allowing maybe more cooling to the SSD area.
Both sides of the fan are intake. The exhausted air eventually leaves the back of the console next to where you plug in the power and HDMI.
@@GamerErman2001 ooh ok thanks i misunderstood the whole air directions then,i thought it was 1 intake and 1 exhaust.
I'm curious what the temperature inside the console is like. You measure the SSD that isn't really affected by the plates and still saw a slight improvement, but it doesn't tell us anything about the temperatures of the CPU and GPU which is what the plates are supposed to effect to bigger effect.
I so tempted to drill holes in that ssd cover plate, even with the built in heatsink on the nvme
GRAUGEAR Metal Heat Dissipation Cover. Looks good too
Orientation makes a difference as well
Hmm just a quick question what if u left the original plate on the disk side and the other vented would it be cooler ? So mix n match
So the plastic holds more heat?
Because the exhaust does not change due to changing the plates .
So no custom heatsink cover fit over that firceuda version?
Big unanswered question is how much more dust enters the PS5 with the vented covers and how that increase will impact temperatures IRL over time.
Where did you get that colored PS logo on the front of your system?
I was going to comment the same thing lol I want it
came to the comments for the same question but no answer I can find yet
you can get these virtually everywhere nowadays on ebay and etsy
I was wondering if or how much of the internal temperature difference would be without the fan guards. Air moving threw them will become turbulent and slow down. In theory.
How you put the Playstation logo in the middle and where I can buy one ?
stupid question but did you make sure to NOT test with the ps5 standing vertically without the factory stand? i've been reading a ton of blogs saying that running the ps5 vertically-flat (like in your non-running commmentary) inhibited air intake flow from the bottom vents.... again i'm sure you ran it horizontal but just wondering. thank you!!!!
Nah, what would sony know. Lol
How did you install the PS3 logo in your PS5??? I want to do this, but i don't know how do that.
So is it fine to lay the ps5 on its side with the Dbrand case dose it blow hot air back into it
Bought the Darkplates, added a screen to the curved intake/center section and even added a micron mesh to the Darkplates to reduce dust intake. I also plan on removing the fan cover grates since they are simply useless unless you plan on travelling. The Darkplates actually DO assist in active airflow and reduce the internal temps by 40 degrees Fahrenheit. Gamers Nexus numbers with/without PS cover plates temps would be more accurate since they placed thermocouples on the actual memory and processors and you are taking a temperature of a piece of plastic that maintains the same constant temperature. I even ran a FLIR camera on my system after 2 hours of playing Horizon Forbidden West in resolution (4K) mode and the exhaust temperature was 50 degrees Fahrenheit lower than with my old PS5 plates. Plus you can see on your PS plates side that the graphics activity is much less drastic than the Darkplates video. you were really trying to get that processor to work on the Darkplate side.
Hi would you advise me to buy this cover
my greetings for you
50 degree difference? That's a lot
I'm confused. At 13:30 your charts show that temperatures fell way down between games using the Darkplates, whereas it stayed almost the same with the regular PS5 plates. How is it, then, that your conclusion from that is that the Darkplates have WORSE heat dissipation? If temps are falling faster between games... that's better dissipation, is it not?
No Sony designed a very specific cooling solution and dark plates reduce it's efficiency.
@@bagelbomb1887ok lol, but that doesn't address my question. His conclusion does not align with the results shown, unless I'm misunderstanding something about the charts.
I don’t understand these temperature tests, doesn’t higher temp mean the console is dissipating more heat? So the cpu will be cooler then the console dissipating less heat?
can you add a fan filter to that then add an usb fan to cool everything quickly
Does it knock out all the dust off inside the system?
please I'm wondering where did you get the ps logo on the faceplate of the ps5 like that??
Cheers for watching. Just put together a guide on it. Fairly low cost and I am adding this to the end of a video coming soon - nascompares.com/custom-ps2-design-build-for-the-playstation-5/
Where did you get your little PS logo on the black section ? Thanks in advance
Amazon. Just search for ps5 controller logo stickers
@@deLAchrys9 thank you
You should test the newer model with the smaller heatsink
Dremel tool and add your own vents?
How/Where did you get the classic Playstation logo on the center strip near the power and eject buttons?
Flaming Toast!
@@jamess.3013 It looks like Flamingtoast just has stickers to put under the original face plates. I'm talking about the tiny Playstaion logo on the black center strip of the console
@@GabrielJosephAhYea it’s the “button mashers” that they have. The PS logo that he’s got there is actually meant to go on the PS button on the dualsense. Trust me, I have them myself haha
@@jamess.3013 Oh awesome! I'll check em out!
Where did you get the ps logo
Personally I like the OG plates it's nice to know there temp difference is negligible
What i am curiuos about is dust, the PS5 original covers channel dust to certain areas to be vacuumed out. will the dark plates put dust in bad places or have the system get dirtier faster
The dark plates have dust filters where the vents are. They are removable , you don’t need to keep them on, which will allow more airflow, but also more dust.
Don’t wanna try that but vertical vs horizontal console placing ?
I personally am loving my Dbrand dark plates but I’m not loving the vents. And reason being I noticed there’s not as much heat coming out the back like normally it would. Which leads me to believe its not cooling the internals as it should normally. I’m thinking of taping up the inside where the vents are or putting back on the ps plates.
I think something that's not being mentioned (by dbrand) is that maybe the materials are different (the composition of the plastics used) from those used by SONY, and that this has something to do with heat dissipation. Maybe the dbrand plates insulate better for some small reason, and that's going to matter in the overall life of the console.
Not as much heat coming out actually means the air coming out as cooler. Therefore they are actually working.
@@TDIETZ22 Bingo
@@TDIETZ22 Exactly. If it's coming out hot, it definitely needs a better solution.
Why would you no place the heat sensor where it exhausts? Putting it under the fan really doesn't represent the actual temperature difference.
What ab the dust filters there selling on amazon?
Interesting. Here’s a slightly different take: The DBrand plate has increased air intake. With this being the case, how do these measure up over time whereas dust builds up internally creating a heat blanket.
It seems to me that using the DBrand covers will result in the need to clean the internals more frequently.
Also of note is that the opening on the DBrand covers didn’t appear to have any sort of mesh to help capture dust particles from entering internally.
the darkplate have an easily removable mesh grills. Cleaning will be much easier. all through if your taking nthe plates off you might as well take the fan out of the console and give that a clean too
@@IronGuardLegionnaire, thanks, I didn’t see them.
Edit: I watched a video from Linus Tech Tips after your comment and this initial reply where he was installing the plates and in the video the mesh plate dislodged from the plates.
PlayStation 5 is an extremely Awesome Machine but I do have one little caveat which is how hot the back USB ports get as I’m not sure what Sony was thinking but I had my cable plugged in for just a few hours and the piece which plugs in is uncomfortably hot in My opinion !
Getting the faceplates with cooling vents is just going to accumulate dust faster on the fans
Nope the DP has filters built in to the vents the dust only accumulates on the filters
Does changing the ssd help with the system just shutting off in the middle of game for no reason with no error
No. The SSD won't solve that. You may be overheating or having other issues like power supply. Clean your PS5 out. Make sure fans work.
Are they making them for ps5 digital yet ?
@NASCompares I’ve not been able to locate the temp tests without SSD cover plate (and original PS5 covers). Will you send the link, mate? I’ve got the Firecuda with heat sink and am wondering if I should remove that pesky cover plate
It should be published in just under a week. No worries man
But, in short, I would remove the plate. Had an overwhelming number of tests over 6 months indicate as much
Can find video did he post it ?
@@neonghost8608 I haven’t noticed but his reply was sufficient for me lol 🤷♂️
GRAUGEAR Metal Heat Dissipation Cover looks like a promising concept
The charts should have had the same scales. Hard to compare between the two.
I want that little logo Ps5's decal.... *.*
Since they’re intake fans, won’t they just build up dust much more quickly?
@@anthonymercado8126 Thanks for the info. That’s unfortunate though. They’re marketing a product that does the opposite of what they claim.
and i was waiting for this kind of tests to buy my plates or not...
writing this before watching until the end
18:12 just a question, if the darkplates make a better job of "cooling" the ps5 can you in a next time you make a video like this (please) read the exhaust temperature?
I think that a multimillion dollar company that spent years of research, testing and designing the system with top engineers experts on the field particularly working on the ps5 should know better why it is the way it is.
Ps5 has a magnetic airflow but what do they know right 😅
I own a device PS5 CFI 1116A Is the device strong?
Tbh everything about having airflow is good like for example if it has airflow then you get dust but also performance but no airflow means no dust but less performance
My nigga you're doing Gods work ty. Cant wait for my DP 2.0s I'm in February wave so by the end of this month I should have mine in. Anybody wanna buy the OG DP 1.0 plates hmu
Never felt more G than when I read your comment. Cheers
@@nascompares lol. Hope you're having a great weekend. Much love and light my brother
How much louder is it though?
is that ps logo on the ps5 just a small sticker? if so where can I also get one
I wanna know this too
@@TheTurboLag hopefully one day theyll see our message lol
Bro its just a sticker
Great video, but you need to choose less-creepy testing music, next time.
Thank you for this. Glad to see it's a $50-$60 waste of money that can go to a game, or an extra controller... unless, of course, one buys it simply for the aesthetics.
Not only that, due to the fan holes on the side it’s gonna be a major dust magnet and all you get is some slightly better cooling. With these plates on you will have to clean it a lot more regularly than with the original plates. What i think is that Sony thought of this and thus sacrificed a bit of cooling for a longer lifespan of the console
@@spillinout although you would think that having the sole intake on the top of the console would allow for more dust to get inside, as dust typically falls downward, rather than moving sideways. so the intake vents seem like they'd benefit more from being on the sides rather than the top. but maybe I'm missing something, idk.
@@spillinout those side vents don't let dust in nowhere near as much as the vents have mesh filters, u can't notice them in this video but they are there
Dark Plates look way better than those Sony wings. Even if they had tied, Dark Plates would get the win for esthetics imo.
is it possible to drill multiple holes on that plate over the SSD?
GRAUGEAR Metal Heat Dissipation Cover. The Germans think of everything
Where can I get the PlayStation logo in the front ?
Cheers for watching. Just put together a guide on it. Fairly low cost and I am adding this to the end of a video coming soon - nascompares.com/custom-ps2-design-build-for-the-playstation-5/
Should I remove the factory ssd plate if I’m using the seagate with heat sink and original PlayStation 5 covers
Nope that would allow easier dust access as well as most likely damaging that particular area over time not to mention PlayStation 5 covers are designed for optimum airflow to cool down the entire system, removing that will impede it
Look at the GRAUGEAR Metal Heat Dissipation Cover
Ic covers the ssd so that it's li ked back with the fan stock system atleast thats what's said we all know what's said and does often varies
What will happen if you use a external ventilator? The one you use in a livingroom for example. Just target the ventilator on the PS5.
Test Kingston Fury Renegade please
How does PS5 function without any plates??
I have a 2TB Firecuda 530 with the factory installed heatsink on the way. I'm wondering if there is possible/makes sense to replace the SSD plate that goes on top with a very slim additional heatsink for even lower running temperatures?
I don't think it's worth it (even if there was one available).
SABRENT M.2 NVMe Heatsink
If you have the factory heatsink, you don't need additional heatsink. The proper temperature of an ssd is 45 celsius to reach peak performance. The factory firecuda heatsink keeps temps below 40 celsius, which makes me wonder if it's over kill? The unsafe temp for ssd is over 68 celsius. The factory heatsink for firecuda does more than enough cooling for your ssd. Just look at Nascompares videos on Firecuda's built in heatsink, the average temp was 37 celsius.
Look at the GRAUGEAR Metal Heat Dissipation Cover. Love the concept
So basically it's such a miniscule difference you should really only make a purchase if you like the asthetic of the plates over the original