Cougar Duoface Pro RGB Build - Step by Step Guide

Поділитися
Вставка
  • Опубліковано 28 чер 2024
  • A full step by step guide to building a PC in the Cougar Duoface Pro RGB. This guide assumes no previous knowledge and is perfect for a first time PC builder. Links to parts used in the build are below.
    00:00 The Parts
    01:06 Preparing the Case
    08:47 CPU Installation
    09:29 M.2 SSD Installation
    09:57 CPU Cooler Bracket Installation
    10:22 RAM Installation
    10:44 Motherboard Installation
    10:58 Case Cable Installation
    12:53 Power Supply Installation
    14:28 CPU Cooler Installation
    17:58 Graphics Card Installation
    19:48 Complete Build Footage
    20:28 Case ARGB Demo
    21:37 Outro
    Parts used in the build (Amazon links are Affiliates Links)
    • Cougar Duoface Pro RGB
    UK - COMING SOON
    US - amzn.to/3CjhIaa
    CA - COMING SOON
    • ASRock X670E Taichi Carrara
    UK - amzn.to/3VcfQbJ
    US - amzn.to/3RLSre3
    CA - www.newegg.ca/asrock-x670e-ta...
    • AMD Ryzen 9 7900X
    UK - amzn.to/3UXwMm3
    US - amzn.to/3e4kB6w
    CA - amzn.to/3SPml23
    • ASUS ROG RYUO III 360 ARGB CPU Cooler
    UK - amzn.to/3WVVdSl
    US - amzn.to/3J4X3KQ
    CA - amzn.to/43SLWgi
    • Kingston FURY Renegade RGB White XMP 32GB 7200MT/s DDR5 CL38 DIMM Desktop Gaming Memory (Kit of 2)
    UK - amzn.to/3nXAC2y
    US - amzn.to/3LosNfK
    CA - amzn.to/3bOCyVb
    • ADATA Legend 960 1TB
    UK - amzn.to/3UpzbEM
    US - amzn.to/3VMWae4
    CA - amzn.to/3XTiUuI
    • MONTECH Titan Gold 1200W Power Supply
    UK - amzn.to/3ZNssb8
    US - amzn.to/3D0o7rI
    CA - amzn.to/3GQMHMR
    • ASUS ROG STRIX RTX 4080
    UK - amzn.to/3N8sOFo
    US - amzn.to/3Nl0bFf
    CA - amzn.to/3P1PMz8
    • EZDIY-FAB GPU Power Sleeved Cable Extension, 16pin(12+4) 12VHPWR PCIe 5.0 Connector Male to Female
    UK - amzn.to/3CX3Nra
    US - COMING SOON
    CA - COMING SOON
    • Gelid Solutions GC-Extreme Thermal Paste - Save 10% with Promo Code - gelid x Chris 240
    UK - amzn.to/3tzlnwT
    US - amzn.to/3mM8Sdm
    CA - amzn.to/3xp1n0Z
    • Maidesite Standing Desk S2 Pro Plus - shrsl.com/3wwme
    Affiliate links
    I am part of the Amazon associates program, this means I get a small commission when you buy through these referral links.
    More photographs of the build can be seen at pcpartpicker.com/b/xGVcCJ and a time-lapse of the build can be seen at • Cougar DuoFace Pro RGB... and the Case Review at • Cougar DuoFace Pro RGB...
    Useful Links
    • AMD Ryzen 7000 Series PC Build Guide - • AMD Ryzen 7000 Series ...
    • How to make a Windows 11 Bootable USB - • How to Make a Windows ...
    • Motherboard Drivers - www.asrock.com/mb/AMD/X670E%2...
    • NVIDIA Drivers - www.nvidia.co.uk/Download/ind...
    • Armoury Crate - rog.asus.com/uk/graphics-card...
    • ASUS ROG RYUO III 360 ARGB - Installation Guide - • ASUS ROG RYUO III 360 ...
    Music
    There's Only One - HALLMAN
    www.epidemicsound.com/track/O...
    #pcbuild #Cougar #gamingpc #buildcomputers #tutorial #beginnersguide #buildingpc #electronics #personalcomputer #budgetgamingpc #budgetpc
  • Наука та технологія

КОМЕНТАРІ • 38

  • @hasanuguz6868
    @hasanuguz6868 Рік тому +3

    Realy clean, detailed and informative pc build guide Christopher. Thanks.

  • @markkeener569
    @markkeener569 11 днів тому

    Your Prensention the best I've ever seen. I'm close to using the same case on a build, and after your Vid I think I will do just fine. Thank you Christopher.

  • @nicolasrolke3538
    @nicolasrolke3538 Рік тому +3

    Hey, can I just say thank you man for your channel. It is so helpful unlike most of gaming channels that are out there, yours is straight to the point, well produced and goes over everything. Thank you man. Keep going. 💯💯💯

  • @leonardocabrini3934
    @leonardocabrini3934 5 місяців тому

    This video was AWESOME! very detailed and organized

  • @SoftCloud27
    @SoftCloud27 4 місяці тому

    Pretty relaxing video, was a really good watch!

  • @renebitorajac2094
    @renebitorajac2094 3 місяці тому

    What a fantastic tutorial!

  • @vrekman256
    @vrekman256 Рік тому

    perfect as always

  • @user-bv1cr2bp1y
    @user-bv1cr2bp1y 3 місяці тому

    Thank you, I benefited from your explanation

  • @victorvelesvillavideos
    @victorvelesvillavideos 7 місяців тому +2

    I don't know if you have heard about the new PSU from Corsair, the shift series that have the cables to one side, the thing is that they say that the case must have a minimum width of 210 mm, I know that this model does comply, but in your experience you see that the back cover is very tight or glued to the source... because I think it should at least measure more than 5 cm, so that the cables can bend and go up or go to one side.

  • @jimjimakos897
    @jimjimakos897 5 місяців тому

    thx for this

  • @vikey9140
    @vikey9140 7 місяців тому +1

    Cable management is brilliant 🤣🤣

  • @user-ve7ve5yr2l
    @user-ve7ve5yr2l 10 місяців тому

    Hello Christopher! I notice, that motherboard need 10 stand-offs, but in video i see that's being installed only 9. Is this normal for this motherboard?

  • @GuillermoMartinezVasquez
    @GuillermoMartinezVasquez 3 місяці тому

    hello. An orange USB 3.0 port doesn't work for me. Do the two front orange ones work for you?

  • @exceededrust9884
    @exceededrust9884 4 місяці тому +1

    When I click that button it just restarts my pc. Anyone know the answer to this?

  • @EuripidisZ
    @EuripidisZ 8 місяців тому +1

    Great review. Have you found how to sync RGB lights with motherboard? In manual it says that you have to press the RGB button for 3 seconds and then it syncs but it doesn't work for me

    • @georgejimenez9197
      @georgejimenez9197 6 місяців тому

      Hola amigo, me pasa exactamente lo MISMO. Lograste solucionarlo mi motherboard es una MSI software msi mystic light

    • @kalitkas
      @kalitkas 5 місяців тому +2

      For rgb need connect to motherboard ARGB. Try press ~5s and you see white color, it's mode for motherboard. Use msi center.

    • @kalitkas
      @kalitkas 5 місяців тому

      ​@@georgejimenez9197read

    • @affita5723
      @affita5723 4 місяці тому +1

      @@kalitkasthanks bro

  • @sethporter3145
    @sethporter3145 Рік тому +1

    I'm wondering when you'll upgrade the SSD to M.2 5.0? Most of the motherboards you show support M.2 5.0 drives.

    • @ChristopherFlannigan
      @ChristopherFlannigan  Рік тому

      One on the way from Crucial, so hopefully covering it on the channel soon

  • @ytice695
    @ytice695 Рік тому

    How can you control the rgb on the fans with Msi mystic light does it need to be in a certain mode on the case

    • @kalitkas
      @kalitkas 5 місяців тому

      Connect argb on motherboard, press reset for ~5s and wait white color, now u can connect in msi center

  • @davidpatrick8153
    @davidpatrick8153 7 місяців тому +1

    I noticed other people with the similar problem, but I connected my CPU cooler RGB to the Cougar RGB panel and synced it all to my motherboard. However the CPU fan light acts all wonky and does whatever it wants. Just curious if anyone found a fix, thanks

    • @kalitkas
      @kalitkas 5 місяців тому

      For me work fine, msi center.

  • @talkingcom
    @talkingcom 11 місяців тому

    ❤❤❤

  • @keczupowyzdzisiek7417
    @keczupowyzdzisiek7417 7 місяців тому

    Hello, which case wil be a better choice. Cougar Duoface PRO or Lian Li LANCOOL II Mesh C. Thanks in advance

    • @user-vn2nx1yq9e
      @user-vn2nx1yq9e 2 місяці тому +1

      мне понравился cougar mx600

  • @henrylober1373
    @henrylober1373 11 місяців тому

    Did the motherboard mounting screws come in the box?

  • @simoeqr1113
    @simoeqr1113 Рік тому +2

    can 750w psu handle these specs r9 7900x rtx 4080, no overclocking.

  • @MARCO-vj9oy
    @MARCO-vj9oy 9 місяців тому

    duvida cruel, entre esse e o Lian LANCOOL 216

  • @ytice695
    @ytice695 Рік тому

    How can you control duoface rgb case arg

  • @vrekman256
    @vrekman256 Рік тому

    +1

  • @alejandroit2974
    @alejandroit2974 5 місяців тому

    why u removed reset of hub? and connect to mother