Tacoma Ditch Lights - Baja Squadron w/Cali Raised Low Profile Brackets - How to Install & Review.
Вставка
- Опубліковано 22 лип 2024
- Today I'm installing the Baja Designs Squadron Sport Amber Lights along with Cali Raised Low Profile Ditch Light brackets on my 2019 Toyota Tacoma TRD Off-Road.
👉 Parts Used In Video
------------------------------------------
►Baja Squadron w/Cali Raised Low Profile Ditch Brackets: bit.ly/2J3baEe
►Baja Lights without Brackets: bit.ly/33byDuh
►Brackets without Lights: bit.ly/336DWLm
★Coupon Codes★
Code: HARLEY - 5% off at TheYotaGarage► bit.ly/3nMBpPc
★★★Build List ★★★
2019 Toyota Tacoma TRD Off-Road Cavalry Blue
-------------------------------------------------------
► F/ Bilstein 5100's: bit.ly/2YatEbJ
►OME 887" 2" Lift Springs: bit.ly/3bJSS4t
►R/Bilstein 5100's: bit.ly/2YatEbJ
►ICON 1.5" AAL (Add a Leaf): bit.ly/3cPAOWO
►Milestar Patagonia M/T (285/75R16 - 33X11.50): bit.ly/3kd84e7
► Method Bronze 701 Trail Series - 16X8: bit.ly/3eX9Kqo
►TRD Pro Style Grille w/ LED Lights: bit.ly/3aKLx3g
►WeaterhTech Dark Smoke RainGuards: bit.ly/3cSTLId
►WeatherTech Floor Liners: bit.ly/2VERWsE
►Tailgate Inserts
► Diode Dynamics SL1 Headlight Bulbs: bit.ly/2QENjLS
► Toyota Tacoma Baja Designs Amber Squadron Sport Fog Lights: bit.ly/3jmQHqW
►Smoked Sequential Mirror Turn Signals : amzn.to/2HXVn9e or amzn.to/2TO8axH
► DV8 Toyota Tacoma Roof Rack: bit.ly/3k6Yl9m
► RSI SmartCap for Tacoma: bit.ly/2SumFq1
►Cali Raised 43" Amber/White Dual Function Light Bar: bit.ly/3oINw0c
►Cali Raised Accessory Switch Panel: bit.ly/2UabW4R
►Baja Squadron w/Cali Raised Low Profile Ditch Brackets: bit.ly/2J3baEe
#bajadesigns #tacoma3g #toyotatacoma
00:00 Intro
01:02 Unboxing
01:57 Mounting Baja Lights Onto Cali Raised Brackets
03:54 Install Ditch Lights onto Tacoma
06:55 Review and Light Output Test - Авто та транспорт
Hands down one of the best tutorials on UA-cam. Straight to the point, no fluff, just pure content of actual product. Well done Sir!
Thanks for watching, glad you found it helpful!
Much better tutorial than most of the bigger channels and better visually even than Cali Raised own video. Thanks!
I've been using the Cali Raised ditch brackets for five or six years now, they're great.
Instructions are dummy-proof, installation is basically fire-and-forget.
nice video dude! always informational.
Exactly what I was looking for. I’ve only had the Cali Raised ditch lights for a few weeks but the output isn’t as great as I thought it’d be. So I wanted to know if another brand would fit into the low profile brackets. So thank you so much!
Great videos. Straight to the point👍🏼
Thanks for watching!
I needed the one part you didnt film lmao so i have everything installed, and like you Im running a switch panel very similar to yours. What did you cut in order to expose the + and - in order to connect to your switch circuit?
Have you noticed any pinching or cutting of the ditch lights wiring with where you placed the wires?
What amp Fuse did you use on the Switch panel for these lights?
i liked this video 3 seconds after it started
does that Cali raised ditch light brackets you got fit 2015 tacoma?
Great job!
Thank you!
bravo drug ovo mi je trebalo
Can't find a video that doubles my ditch lights as blinkers and ditch lights..
Will this product fit my 2015 toyota tacoma
I wonder how long the battery last with all the extras...
Whats your tint level??? =] got my 2017 tacoma at 15% and i should have gone darkerrrrrr
Just FYI, go buy some black spray paint to make the brackets match everything.
What sort of spray paint or will any do?
Nice job..but how is the reflection on hood with the lower brackets...also people said that having higher brackets alleviates the glare...? I do like the lower brackets though.
Ditch light point "Out" so the hood glare is minimal.
How did you set up and cut the original Baja harness/wiring into the switch panel? I have the same ditch lights + the 8 button switch panel. Thanks!
Would also like to know...great videos though. I sub'ed
Great video.
Will this set-up work on a 2015 Tundra?
Yes it is work. Just need to buy second gen brackets.
I’m running same lights to after market switch oem style it requires relay what’s your take the Baja harness didn’t come with relay
Bantamx with spod switch/touchscreen you’ll never go back
Id be nice to see how you use the Baja wire harness thru the firewall, I'm trying to install mines and wanted to see how you would connect with an OEM switch button.
Check out the firewall portion of my switch panel video, it will give you an idea how to run the wire through the firewall and access the oem switches/coinholder: ua-cam.com/video/ke3Nn7-kgmY/v-deo.html
Thanks for the vid. I am about to do the same install and I have the same style switch panel as you already installed. I am planning to wire them individually to the panel so I can run them individually or together. Do you think there is enough wires in the provided kit to run both lights to the panel with the provided harness So I can keep the factory connectors on the pods?
Sorry for the delayed response, yes, there is going to be enough wires and you will be wire them individually!
@Beto71 hdz perfect. There was more than enough wiring to have each light wired to individual circuits on the switch panel. Now I can light up either side on command. It is nice when looking for animals or house numbers on the passenger side without blinding oncoming traffic.
@Beto71 hdz I like very neat wiring, so the way I have it ran, I was able to run each light using parts of the harness. So yes, I cut the harness wires right at the point each lead entered the bottom of the Auxbeam switch panel which is mounted just above the stock fuse box. Each light is then connected to its own lead using the provided waterproof connectors from the light kit. Long answer, but yes, I cut up the provided harness...lol
@@oldmanhare hey man kinda new to this wiring stuff, the wiring harness that came with the lights you cut them off at the relay? Since you have 4 connections wired at the relay how do you wire them when you cut them at that point? Thanks man!
@@kriscarnage753 So, I wired mine individually to an Auxbeam switch panel i have installed under the hood. The switch panel has a positive and negative for each item to be switched (8 positive and negative outputs). If you want to run both lights on one switch, you can simply twist the 2 positive wires from each LED together and then screw them down to the positive and the same for the negative. You could also connect the two positive wires to a single extension wire and then run that wire to your switch...and the same with the negative wires. But on mine the left pos and neg go to the pos and neg on port 6 on my switch, and the pos and neg of the right light go to the pos and neg output of port 5 on my switch. If you don't have a switch (like the Auxbeam 8 port panel or a Switchpros panel), then keep the harness in one piece and use the relay.
Do you find they impede corner view out of your windshield?
Not at all, as they are fairly low on the hood. After about a day of driving, I barely notice them anymore. Also, I'm 6'1" and sit up fairly tall in the truck.
I’ve got the same switch panel as you.
what wire harness did you use that doesn’t have a relay and switch attached?
I used the Baja designs Harness and just cut the harness at the relay, you don't need to run the relay with the Switch Panel.
Which fuse did you use on the switch panel?
What light bar did you used on the top?
I'm running the Cali Raised 43" Slim: bit.ly/3aUOEb8
What is the purpose using a yellow light as ditch light?
It’s easier on the eyes and it’s also a more traditional color
Did the hood shift?
It didn’t!
how come no one ever includes wiring into these videos?
I know.. killing me. I have the same setup with the 8 gang panel and when he said he wasn't going to use the harness I was so excited to see how he wired it up.... :sigh:
jealous
Make sure to use anti theft nuts. These get swiped all the time in Colorado.
Good feedback, I'll have to look into anti theft nuts!
good thing I don't live in Colorado.
How about ohio?
Oh hai jt!
Hi Khan!
Don't make fun of that dog!!!