Weber Mod: Silicone Seal for Low and Slow Cooking
Вставка
- Опубліковано 29 сер 2024
- TODAY's Amazon Deals: amzn.to/3AjP7no
Silicone used: amzn.to/2BuwKbA
Looftlighter amzn.to/3YSyNEu
Amazon Heat Gun amzn.to/3yAcaKv
Black Nitrile Gloves: amzn.to/2PKMRur
In this video we show you how to seal up your Weber for better temperature control using a tube of silicone and some Vaseline. Be sure to use tons of Vaseline because, if not, you run the risk of sealing your Weber shut.
Free Month of Amazon Prime: • Video
My Gear:
Camera: amzn.to/4dq87yW
Mic: amzn.to/3AlMXnh
Wireless Mics: amzn.to/4dtzNmK
Tripod: amzn.to/4funk3T
Editing software: amzn.to/2yv3rtf
Smart Home:
Raspberry Pi: amzn.to/3yCB2ku
Smart Plugs: amzn.to/3A83vix
Roller Shade: amzn.to/4dq8ppw
Fan Switch: amzn.to/3LSiQq5
Grilling:
Grill: amzn.to/2RO7GYP
Black Nitrile Gloves: amzn.to/2PKMRur
“I’m going to clean the vaseline off of this rim real quick”
That’s what she said
Rub it over the top and bottom aswell!
I think root cause is kettle bottom or lid being out of round. Measure to find the long side of the oval, then bear hug. Works like a charm. I check for smoke leaks and bear hug as needed. Maybe 2-3 times a year. Takes me about 2 minutes to do.
This is exactly how it should be done. Basic stuff. No silicone needed.
Damn that’s a good idea. All three of my kettles are getting this. Thank you!!
Video of this needs to be uploaded . Bear hug it literally? Lol need to fix mine
The weber remains my favorite grill. I still use it. I used it today, as a matter of fact. Mine is about 8 or 9 years old.
perhaps not the point of your instructive (and good) video but one thing I learned from it was that dog absolutely LOVES that dang purple kettle-ball toy. > D
Haha yes she did love that toy. RIP! rest in pieces 😂😂😂
Nice DIY. Very informative. I would suggest a high temperature food grade silicone though. Cheers mate!
No, most aren't high heat food grade
@@Itzascript.
If it’s red silicone it is food grade high temp.
I use large binder clips to seal mine.Works real good
Curious, couldnt you just press the lid down on the grill and then just take it off and let it dry so you dont have to deal with having to pry it off.
The one thing I like about these kettles is the ability to move the vent around. You are now Limited to put in your vent in one spot.
you can still move the vent and it seals very well
@@BreakItYourself at the 2:40 Mark you said it's best to leave it in one spot. This is why I assumed you can't move it around very much.
@@randyj5833 If you're using the kettle in way where you need the vent to be placed over different parts of the grill, then you're probably not going to be worried about smoke/heat retention for longer cooks at low temps. Anybody who uses a kettle for a low and slow cook like ribs or pork shoulder or brisket is usually going to set their grill up the same way every time, so you can estimate where you're going to want the vents at and then create the seal with that in mind. If you use your grill for other purposes that don't need smoke retention, then rotating the lid around isn't going to hurt the silicone seal you've made here, it just won't fit the exact line that the original seal made when it was cured.
Enjoyed the video, BUT just a note for anyone with a Pizza Attachment/Kettle Pizza that this may not be a great idea. The grill can get up to 900f+ temp wise and the highest I have ever seen a Food grade high heat silicon rated to is 650f.
ahh good point! idk if i've ever gotten up above 500 tbh
Break It Yourself With a big crescent of coals and large pieces of hardwood it gets to 800f+ with ease :).
Which felt seal from which vendor will you advise?
Cedric Segard High-Que gasket is made for extreme heat (Built out of Kevlar or Nomex). With a bit of work it can be used / moulded onto a Kettle.
Ok thx a lot
Going with this idea. I don’t do high temp cooks on the kettle anyway. So we will let ride. Thanks
I've cooked so much on my kettle that the resin that's built up makes a perfect seal on the Weber lid...
Just cook more and you're good... Still a nice video.
So youre saying you dont clean your grill much?
lol I was watching this video and was like hmm I don't think my Weber leaks..? went out to check, added a small chunk of wood to check. no leaks!
saw this comment and yep. I've never cleaned the inside... only the grill grates. and I got this Weber for free on Craigslist!!
self-sealin' grills =D
That is very true! and the best seal ! let the smoke resin seal it
@@AndrewLeeW1 i always clean my grate. I don't clean anywhere else though, that would ruin the "season" that makes a grill awesome.
I like the Lavalock felt gasket with high temp peel and stick
Does it hold on after use?
Yes. It'll last at least 2 years
6:04 Daughter broke the shed window and played it off smoothly 🤣🤣🤙🏾 Nope... Nothing to see here
wow I missed that. Sure sounds like she broke something
That's kids for you. I might just start following my son around the house with a vacuum... might be a more efficient use of my time 🤣
Tried this method, glued the top to the bottom. Applied plenty of Vaseline, a lot, but still glued it together I could barely separate the two. Actually damaged the porcelain in the process of separating. Pretty much ruined my grill. Might have to buy a new one. Maybe Saran Wrap might have helped. But I just screwed my grill. Cant say I recommend this method.
I don't know why people would do this method rather than the tried and true gasket + lavalock smoker seal kit(s). Sad to hear you tried his method and as I assumed many would have, with bad results.
Wow this saved my life, I told my girl I have Vaseline in my car because of this video, she went for it. Thanks Man I owe you one.
Great idea. Going to pick up a tube of silicon next time I'm at Home Depot.
Just be very careful and use a lot of petroleum jelly! Also I forgot to mention that I kept the vents open to help dry
Going to try this with my Weber - same style grill, but the dark red colour.
I think I'll do it a bit differently, though: I'm only going to put the silicone on the inside of vertical rim of the lid which goes over and around the bottom rim. Not sure if that makes sense as I explained it. The lid has some freedom side-to-side when it's on, so this way the silicone will take up that space and hopefully create an airtight seal. This removes the need to keep the lid on while it cures - if I put too little, just add another layer of silicone, if I put too much, the lid can still probably be pressed on, or silicone removed by sanding or trimming. I'm pretty sure this way would also mean it wouldn't matter which way the lid is put on after.
FWIW, Weber's answer to the smoke escaping is that it's not really an issue, and you should just wait until the carbon build-up creates a natural seal. I can't wait tho, and want full temp control immediately.
BTW - I have the same knife - Kershaw Leek in black DLC, plain edge. Great EDC folder!
Freaking love that knife! It was a prime deal one day so I snagged it. It’s my edc as well along with a few other things... haha I like your idea. I realize now that having the silicon cure while the grill is together can be risky. Someone commented that they essentially siliconed their grill shut. This method needs some revision.
If you are doing low n slow it actually isn’t a bad thing to have smoke come out one side of the lid, put your meet on the leaking side it’ll pull the smoke over your meat
You can also do that with the damper, rotate the lid so it's above your meat
I have a black shepherd and that ball with the handle is her absolute favorite toy. I couldn't concentrate on what you were doing, I was laughing at your dog
Good idea. I need to that with my Weber Smokey mountain.
Great Idea! Thank you I plan to do the same thanks to your video.
Be VERY careful. The comments of this video are riddled with people who glued their grills shut 😂😂😂 maybe use cling wrap on the bottom, Vaseline on top of that, and silicone on the inside of the top. OR Vaseline the bottom, silicone the top, press together and immediately take off to dry
@@BreakItYourselfI used painters tape, then applied the Vaseline. Worked like a charm
I'd fail this as soon as I had to press down. I ALWAYS have to wiggle the lid around until it sits right lol.
Mmmm, gotta love that smoked silicone gasket flavor.
If you use the RED HI-Temp, it's probably OK. Good for 500F.
I'm thinking a length of Stove Gasket. Made for wood stoves so the heat would be no problem at all.
You can squeeze the the lid to make the lid perfectly level. You just have to have a little patience. My Webber kettles are sealed almost air tight. Occasionally I will see smoke escaping from the lid for about a minute. Of one my webers would seal before I unwarped the lids.
I do like your hack there though. I would have just waited until I straightened out the lid, or bowl first.
I need to try this. Maybe putting a ratchet strap around the edge of the lid could work also?
Good idea... but....I believe this material may cause outgassing (the release of a gas that was dissolved, trapped, frozen, absorbed or adsorbed in some materials)
I want to seal off my grill but i really dont like the idea of using silicone where im cooking
Really helpful man. God bless u
Nice
Thanks, been having this problem for years, gave up BBQ and went to grilling only. Maybe there is hope. The silicone not make food taste bad?
A smoke leak doesn't has to stop your dreams of wanting to do a BBQ it affects the performance just a little bit. It is not a big deal
Nice.. I was going to use lava loc on my kettle. Good tips.
Kevin Nash's Kitchen me too, did this work for you and what type of silicone
I don't really see a problem with little bit a smoke leaking or a real need to prevent it. YMMV.
For sure! Just something I thought I’d try. Thanks for watching and commenting!
The leak causes you to lose temperature control.
Oren
You don't know much about grilling... or smoking
pretty slick
I did exactly like you did and made sure to use gobs of vaseline. Sumbitch is on there like it's welded. Used a razor blade to cut as deep as I could in the rim. No good. I don't know what to do now.
I had to pry my lid to get it unstuck. I globbed so much Vaseline on the lower rim but that was a waste of time. Now I have rtv stuck to the lid and to the rim. Huge mess and now the lid smokes even worse than before
@@drimmie luckily, I work with a neanderthal who was able to pry ot open. That's after I spent hours with a razor blade cutting what I could reach.
Next do a video on how to seal up a “Pit Barrel Cooker.”
🤣
send me one and I will haha
Out of curiosity - why would you care? The seal is not going to help with heat loss. You are just missing a little smoke?
i did it for finer temperature control
More for heat gain if you're aiming for 250 and its windy with an unsealed lid it'll climb over 300 with ease
I don't see why you need to leave the top on for it to cure. Just put the silicon on, make an impression, and then take it off to cure so you won't have any chance of it sticking together.
very good idea
Love the video very helpful an simple. Adore your dog is the a German Shepard I have had many 1 was black with white paws. 👍
Does your lid usually go straight on easily silicone or not?
I'm here for the Vaseline jokes
EXCELLENT!
good idea bro..
Freaking awesome vid!
OK, I'm going to try this. We've had a lot of trouble controlling the heat on our Weber Kettle during low and slow cooking. I suspect part of the problem is the leak between the cover and the bottom. My only concern is my remote thermometer cables that have to pass between the top and the bottom. Do I create a channel for them to pass through?
one of the best suggestions I got was to use plastic wrap on the side not receiving the silicone and then put the Vaseline onto the plastic wrap so that worst case scenario you don't get the grill stuck together. and as for the wires I didn't do any planning for them and just close them into the lid
Maybe try running the wires through the top vent holes......
BansheeFifteen it’s mostly about heat control and patience;
if u do a low and slow method cook, try loading about 80-100 coals to one side as far as u can to one side (spaced into a 1/4 moon shape) (unlit))
start off with bottom damper at about 1/4 open and top vent at about 1/8th open.
heat up 5-6 coals in a chimney like a weber or similar... get good and hot;
once hot, put those directly in the middle AND to the slide of grill of the 80-100 coals that are unlit;
put lid on; wait for temp to stabilize for 15-20 min; adjust top vent in SMALL increments as required after stabilization to go up or down in temp; should hold at 225-240 for 3 to 4.5 hr. low and slow;
works great;
adjust for temps needed to start...
if u need to hold 275-300, start off with 8-10 lit coals (on top of those 80-100 unlit)
same technique.....
I did it with a high temp proof gasket bought from Amazon. Guess what, it seals too good so now I don't get enough air comes in so the internal temperature keep dropping even the bottom and top vents fully open.
I ended up wedging the lid a bit with a piece of wood!! Does anyone find same situation I wonder...
Yoshi. O maybe get a small 4 inch fan to blow at the bottom of the grill? You can get them for 10 dollars ok clearance at many department stores
Was thinking doing the same...
Hi there. I know you had to have used heat resistant silicone, but it would have been good to mention that in the video. Also, what brand was it and it's temperature rating?
www.amazon.com/gp/product/B072JVDG72/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
what is the silicon did you use ? brand name please
Why did you put it on the top instead of the bottom like 2 years ago? Thinking to do this with my wsm saran wrap and vasoline I dont want to chip it up like the other dude lol.
using it on the top keeps it more protected. having it on the bottom it got hit quite a bit.
I do not see the point to close the lid with the silicon fresh and having the problem of removing the lid later having all that sticky seal to the grill, and as you can see the seal is not even and parts of it were left in the grill when you removed the lid day after. I would suggest for the next time to seal the lid using your fingers and let it dry on its own. The weight of the lid then will be enough to make the seal to fully contact the grill without any lose of silicon, no need to make some sort of silicon mold. My 2 cents.
How has this held up for you?
Top and bottom stuck together :(
When you showed the clip of the lid leaking smoke at the end before you siliconed it, why can you see a little red silicone already on it?
Two reasons. 1. This is my second time doing a seal so there was already silicone on there. And 2 I forgot to film before the seal so I offset it after I put the seal on just for example.
Break It Yourself ok thanks for explaining. I'm definitely doing this to my Weber smoker. It leaks and this seems like a good idea.
Just be sure to use tons of Vaseline
Break It Yourself You can also make "protopuddy" by mixing corn starch and silicone together. The corn starch makes it so it's not sticky and you can mold with it. I saw King of Random make it for a seal for a vacuum chamber in one of his videos.
Isnt it dangerous asuming it gwts hot
I always wondered if that would work. I would have never thought of the baseline though. Good job! By the way, did you you use Permatex High-Temp Red?
Is there any chance to a chemical reaction because the silicone? It's safe to use this in a grill?
If it's food grade silicone it should be fine.
Don't do it. Leaves a horrible smell if you get it too hot.
But is it a pressure vessel? Theres no need to do this. - you dont close up teh top vents as well do you !!
Hey, did you get any new idea to solve the leaking without any risk?
In my experience when the kettle leaks it’s because the lid and or kettle are out of round. Super easy to correct this. Use your grate as a reference and “bear hug” the grill. Doesn’t take much force to adjust the round.
@@markboulier2006 This is exactly how it should be done. Basic stuff. No silicone needed.
Why not just use a felt seal and it holds smoke and heat in perfect. Overall not a good choice to just use a solo chemical seal even if food great alone...felt would have been perfect.
How would you seal the felt. Know I'm a year late, but,I just got one of these since its just me and the wife. Still wanted to cook for 4-6 if need and veggies. Had big smoker but don't use as much. I remember a friend had one at his apartment for years
i do not think this is necessary . i live in Wisconsin .i use my kettle in a -24 alot holds heat fine
for sure. It's less about temp retention and more about temperature control. I had a lot of air leaking out around the rim which made temperature control an issue for me
@@BreakItYourself same here. the stuff is curing right now, going to test it tomorrow afternoon!
Tell me why a small leak around the rim matters . Your leaking cause lid and or rim out of round slightly .
It doesn’t matter that much. May keep in some heat and help fine tune temp regulation on long smokes. Just thought it would be a fun video to try
It helps stabilize temps slightly. Definitely a worthwhile mod on a kettle. You really see the difference on windy days and cold ones the most. Great video!
Just snap on a binder clip at location of smoke leak. Works for me.
Binder clip, whats that?
Well, I broke it myself. I guess I didn't apply enough Vaseline, but I had to beat the lid off with a hammer. If you think you have applied enough Vaseline, you are wrong. Apply more. Now that I have beaten the powder coating off in places, I guess it will start to rust. And it still leaks smoke because I changed the shape of the lid. I should have bought a stick on gasket.
Now that I have already messed it up, I am thinking about what I would have done differently. I think I would have covered the base of the Kettle with suran wrap and sprayed it with Pam. I think the lid would have come off easily and I could have pulled the suran wrap off of the lid.
Oh no! We’re so sorry to hear this! What kind of grill was it?
Weber Kettle
I laughed out loud... Real LOUD! I'm sorry to hear what happened, but the way you worded it was money!
Its easier to just bend your lid back into round. Or maybe use Fireplace door rope instead of silicone.
URS A LOT OF Vaseline! That what my she said when I was behind her. Cheers 🍻 EH😂
YOU PUT RUB ON BOTH SIDES IF YOUR RIBS, DON'T YOU?
TELL EM TO PUT:
What a stupid idea. Just cook on the thing more!
Vaseline not baseline.
Vaseline on the bottom lip: after you CLEAN it real good then DENATURED alcohol and Vaseline BOTH SURFACES ( the bottom metal & TOP OF THE SILICONE BEAD?)
TRY THAT { after some lid / kettle :" banging" to make them more concentric?
You forgot to mention:" FOOD GRADE SILICONE" ?
SAVE SOME FOR THE TEMP GAGE TO KEEP GUNK OUT OF THE GAGE/ GLASS ETC. ?
Why not put down some Press n' Seal on the kettle, then apply Vaseline to the Press N' Seal, then put the Lid w/High Temp Silicone on to the Kettle. This way, you don't end up with red silicone all over your Kettle rim. After 3 days, remove the lid with ease and pull off the Press n" Seal. Easy as pie!
now that is a great idea! Bill you are a genius
I like that idea. If I decide to try this I'll definitely use your method. Thanks.
Why didn’t you return the grill? You had a defective product. Weber would had taken care of you.
Complete waste of time, if it needed a seal Weber would have installed one.
Really! - there's also a vent with holes in the top that leaks - need to seal that too. Just a waste of time trying to seal the sides - its not a pressure cooker - its a BBQ!!
That’s a dumb idea plus it doesn’t hurt anything if it billows out one side I’ve done low n slow cooks and my temp is easily manageable good way to ruin your grill plus when your doiing the snake method you need to turn your lid so vent moves as the coal burns now you can’t do that
Check this site. bbqgaskets.com/kits-by-brand/weber.html. They sell gaskets for many brands and many other products.
come on dude, play with the dogs
Seems to me the Vaseline should be first the silicone will already be setting by the time you put the Vaseline on and quit talking ...
There is absolutely zero reason to seal the lid.
This is mostly for smoking...Sealing the lid allows you to completely control the temperature by how much air you let into it.
Taylor R funny, I have 4 weber kettles and a WSM I use them all the time (actually using my WSM right now). I've never needed to seal the lids.
@@jhitt79 Did i say NEED? Nobody NEEEEDS too. I said it allows you to better control the temperature.
Taylor R I'd be willing to bet $1000 that a side by side comparison would show no difference.
My WSM Leaks like a motherfucker yet it runs perfectly I can adjust the temperature from Super lo to super high and keep them very consistent.
LOL, 4:19 that's what she said!
I'll pass... I think a rope seal like they use on wood stove doors will be less hazardous... Then again who cares if a little smoke leaks 😂😂😂
Jeff Tousignant what holds the fiberglass rope in place you asshat? 🤔
salmon taco didn't really think about it cause i don't care if my grill leaks fucktard...
Stupidest thing I’ve ever seen a someone do to his grill!
Who cares if it leaks from the sides you need to get a life
you sound like a ton of fun