DIY Dolphin Sensor Bar - Best & easy 100% working advise
Вставка
- Опубліковано 22 лип 2024
- To make your own #diy sensor bar you will need :
1) 1 old usb cable ( needs to be able to support at least 5 volts )
2) 4 Infrared ( IR ) LEDs - they shoud be 1,2 volt each and as a suggestion buy the blue leds ; not the transparent ones !!
3) 10 ohm resistans
4) some extra electrick cables
5) a plastic cable channel ( if you want it to look good ) Mine was 25 cm long
Best way of making your own sensor bar.
No need to use candles to hack a dolphin sensor bar.
You can use this for a dolphin emuşlatıor and also for the wii console... - Ігри
Thanks for the in depth explanation man :-)
thanks for the video! i really needed it!
How do you connect the wires?
i tried to do this and i had no luck at all i wish you did a tutorial on how you did it
Where can i get the electrical kabels?
Works
Thanks 😊
Thank you Rami. The reason why I do these videos is to help others. And to hear a small thank is worth all the work I did. I apprisiate your comment.
@@merakltilki2651 Your words are true, a word of thanks is enough and it helps to continue, and I thank you for your work 🌹
I know that would be a silly question but being as though the wiimote requires bluetooth, would this work without bluetooth for dolphin?
The sensor Bar doesnt need Bluetooth it just gives infrared light for the wii remote to orientade. The wii remote needs Bluetooth
ua-cam.com/video/uhRuzbeXccA/v-deo.html
The link i gave is in Turkish. But it shows how to use a wiimote with dolpfin emulator. If you have an orijional wiimote şt is easier but if your wiimote is not origional than you will need a bluetooth dongle and a special programme as shown at video tonset the bluetooth dongle to beat setting for dolphin to match and be able to use with games and sensor bar
But to use a sensor bar you dont need any Bluetooth
Hi, nice video! I can only find the transparent IR Leds; what's the difference with blue ones? Thanks!!
Sorry for my kate reply. I was a bit busy but i hope i can help...
The blue ones should be used as they receive the remotes singal.
I havent triednthe ones you ask but as i know it wont work
Merhaba ,led'leri en kolay nereden temin edebiliriz.
Büyük çaplı elektronik dükkanlarında vs bulunabildiği gibi internette de hepsiburada vs gibi sitelerde bulunabilmekte. Fakat kargo ücreti sebebiyle evinize yakın bir elektik parçaso role vs satan tarz elektrikçiden sorgulamanız daha ekonomik olabilir. NOT: 100-200 adet alınması halinde vs internette de almak ekonomik olabilmekte. Sadece sorgularkeb videoda verdiğim özelliklerde olmasına özen gösterin
gracias :D
Hi.. as explained before i reply, the sensor bar doesnt need a bluetooth dongle or any extra connection. Do as same as video and sensor bar will work. But i belşeve that the question was how to connect the wii mote with dolphin
To be able to use a wiimote with dolphin emulator you might also xheck my videos as i have explained that with some detailed videos.
As a quick reply... If you have origional wiimotes than go to dolpins remote settings and try to add. It easily works. But as if your wiimote is not ırigional than you will need to follow additional steps as best is to watch my detailed video for that
A normal Bluetooth will not work for dolpin matching wiimote... Yıu will need a special programme to make the Bluetooth settings to a special one.. şts best for dolphin to be able to match with non origional wiimote
Abi videon çok güzel. Biz geçen aylarda Wii aldık da nasıl oyun yükleyeceğimi bilmiyorum. Acaba Wii ye oyun yükleme ile ilgili bir video çekebilir misin?
Merhaba ; videoyu beğenmene sevindim. Öncelikle wii yi güzel günlerde keyifle oynamanı dilerim. Orjinal wii konsollara oyun yükleyebilmen için "soft mode" denilen bir işlem yapılması gerekiyor. Soft mode yapınca harici hard disk takarak internetten indireceğin oyun ( rom ) ları kolaylıkla oynayabilirsin. Benim elimde wii konsol yok. Bu sebeple youtube da wii nasıl soft mode yapılır diye aratırsan muhtemelen işine yarayacak videolar bulabilirsin. Bir ara bende inceledim; çok zor değil ama doğru şekilde adım adım uygulaman gerek.
@@merakltilki2651 abi biraz sürdü ama soft mod yaptık. Ve nasıl yükleneceğini de buldum. İstediğim oyunu yüklüyorum. Çok teşekkür ederim abi çok sağol
Sir what is the name of ir led like it is transmitter or receiver ir led
Hi.. all I can say is that its been a long time and I dont eant to give wrong information. The IR kets are not the white ones. The ones I used are the purple lets (maybe blue ones might also work but I didnt try blue)
IR leds are 1.5 volt.
The impırtant part is that your wii ote is allready connected to wii or if using emulator to dolpin.exe (to PC as i did )
What you need is to be ablo to send a small signal to the wiimotes front sensor.
Thats why keds should be transmitter. They should send.. ıf keds are to receive than wiimote will not get anything...
I hooe this was helpfull.
You can check my candle light trick to use as a dolpin bar or the other video as I showed 3 ways to be able to use wiimotes motion abilşty ( as 3 method is 1- this led 2- using two candle lights 3- using cell phones ked light as if possibke use 2 phone lighrs or lamb lights - flashlight etc )
I hope this informatin is helpfull. As long as the wiimote gets a signal or light it works but for it to work stable the beat şs using this diy sensor bar
It's just an infrared LED, the sensor's only function is to provide IR light to the controller, so there's no data transmission from the sensor to the controller, or viceversa.
Can I use normal LED
No you can't because wiimote uses infrared light
Does it work for dolphin emulator