I have to say that this is the best DIY bandsaw I've ever seen. Especially the vertical option. This bandsaw should be the standard for all horizontal bandsaw machines across the board.
This was a really fun project! Thanks everyone for for following my work. PCBWay.com - thank you for sending me one of the band saw wheels - it was a pleasure to mount in the machine. With no doubt I can recommend your service! :) If you enjoyed - please leave me a like and subscribe for more fun projects!
Best of the best! I can never dream of fabricating such a great piece of engineering but your video occupied position one in my library. I loved so much your cutting prowess coupled with your tig welding skills. I wish I could like it 100k times. Thank you so much for sharing
That is hands down hilarious and one of the funniest examples of mistaken identity. As to a Prosecutor or a Judge offering to cut a better deal for simply knowing “the correct attorney” hits close to home to examples in my own youth. The law often has a large breadth of scale for penalties (the difference between paying $100 vs $5000 or whether you serve jail time or not is quite big) and since it’s entirely up to the Prosecutor or Judge to determine where along that scale your punishment should be, having a good word on your behalf of someone acquainted with those determining the penalty really can go a long way.
That was a big project. I'm impressed that you completed it. It is leaving a very square cut on the end of the workpiece! I would like to see the Pivot Point directly over the work piece. If you add flood coolant I would like to see the rest of the video.
i'm not sure if I will add flood coolant to this particular version of the machine - maybe in the future in a new version of it (already have some upgrades in mind including coolant). Not sure what you mean about the pivot point though
Very nice job :) Just few tips: try to make wheels for at least 20mm blades... This 13mm tend to brake after few cuts. Also, wheels shouldn't be closed on both sides, on teeth side on the blade should be open and teeth must be in the air so chips will fall out and when you tighten the blade, teeths would not be straighten...
Maybe when I build a new band saw I will use those hints as there are some small things I noticted after puting it together that could be changed. But for now I used already a bit this saw and works fine for now with the 13mm blade. You're right - the wheels could easily be opened on one side. But I don't exactly get the idea about the teeths that would not be straighten. Could you explain what you mean?
@@GBWM_CNC teeths are in criss cross patern, they are left right if you know what i mean? And when you tighten the blade and teeth are touching the wheel, they get straightened.
@@mojamalaradionica5091 oh snap, I get your point now. So with a 20mm blade the wheel size should let the teeth run outside the wheel. Thank you for your input. I will watch how it behaves as it is now and if it will be an issue I will fix this in the future or even maybe build a new one with all issues fixed
@@GBWM_CNC with all balde sizes should be like that, that's why i said you should make wheels for bigger blade. Even with 13mm teeth it should be 2mm outside the wheel. With 20mm also 2mm outside the wheel. If you straighten the teeth blade will not cut well or it will get dull very soon.
@@joachimruelle8445 Salut. Je ne vends pas de documentation, mais je partage les dessins que j'avais pour mes besoins pour construire cette machine avec les mécènes de la chaîne :)
Hello, I also have a band saw that runs on 380w and I only have 220w, could I put a motor on it to run on 220w? The saw is called Holzmann BS128HDR 400 V. There is also a 220 V version, but I can't find specifications for the motor. Thank you
No vendo nada. Esto es sólo algo de hobby. Pero algunos dibujos que tengo están disponibles para mis mecenas, pero eso no es nada profesional, sólo por la idea que también se desprende del vídeo.
Hey y’all … I have some sawdust, bark, and grass clippings I’ll sell you for your “tea”! 29.95 US for a 6” compressed cube! If you order right now, I’ll throw in some GENUINE mulched up maple leaves at no extra charge!
Witam widzę Kawał pracy wykonajej przytej pile mam takie pytanie w sprawie silownika jak dobrałeś parametry pod ciężar swojej pily bo mam pile prome i padł mi silownik a oryginalne sa beznadziejne i po roku lub dwóch padnie nowy czy byłbyś wstanie doradzić jaki dobrać siłownik i
Szczerze mówiąc, to po prostu znalazłem siłownik, który skokiem / rozmiarami się zgadzał z projektem, a następnie wyznaczyłem orientacyjnie masę ramienia tnącego i sprawdziłem, czy ciśnienie wygenerowane przez taką masę na siłowniku nie przekroczy dopuszczalnego dla tego siłownika pneumatycznego (max ~10 bar dla siłowników pneumatycznych z reguły). Wzór na ciśnienie, to po prostu siła przez pole powierzchni nacisku (należy wziąć pod uwagę powierzchnię tłoczyska - dużo informacji jest w sieci na ten temat).
Też narzekam na brak czasu ale na tworzenie maszyn zawsze znajdzie się chwila :) Projekt rozpoczęty w maju a wydawało się, że przez majówkę siądzie na gotowo. Nie mogę się doczekać, haha! :)
@@NATAN5064 W zasadzie tak też powinno być - z czasem pewnie zęby zaczną uszkadzać powierzchnię kół o czym szczerze nawet wcześniej nie myślałem. Po wykonaniu tej maszyny widzę pole do poprawek przy okazji budowy kolejnej :)
@@artystamechanik9609 Recently I'm using ZW3D for my new projects and honestly It's quite a good piece of CAD software considering it's price. Also most of the softwares available are subscription-licenses now and ZW3D is still possible to buy for lifetime. I've been using Solid Edge in school but I didn't like it much but that's been much years ago (maybe it has changed after so many years though). Fusion 360 is really cool - the only thing I dislike there is the assembling module.
Obejżałem wszystkie odcinki z etapów budowy a i ten też chętnie w wolnym czasie. 👍😀 Ps. Fajnie że udostępniłeś napisy. Można sobie włączyć tłumaczenie na PC jak się czegoś nie zrozumie, u mnie angielski jeszcze slaby😊
Bardzo się cieszę, że podoba się moja praca. Miło widzieć, że ktoś ma chęci oglądać efekty moich wysiłków :) zawsze staram się robić napisy na większości filmów. Dzięki za oglądanie! :)
Probablemente sea U. Uruguayo o ARGENTINO. LE FELICITO POR EL DISEÑO. mE PERMITO SUGERIRLE QUE SI PONE EL MOTOR DEL LADO DE ABAJO Y HACE QUE EL CAMBIO DE LA HOJA SEA POR ARRIBA, FACILITA LA TAREA DEL CAMBIO DE LA HOJA
¡Soy polaco, jaja! :) Me alegra que te guste el diseño. Creo que si el motor estuviera averiado, la distribución masiva no sería tan buena. Pero sí, cambiar la cuchilla sería mucho más fácil.
Sehr Gut gemacht. Gefällt mir sehr. Möchte auch eine bauen. Hast Du vielleicht einen Plan von deiner Metallbandsäge gemacht, den DU mir zukommen lassen kannst Bitte!?
Danke! Ich habe keine perfekten Pläne gemacht, aber ich habe die Zeichnungen, die ich während dieses Projekts verwendet habe, mit meinen Gönnern geteilt :)
@@GBWM_CNC Також зараз роблю стрічкову пилу ) Я б вам радив замінити той ролік що ви зробили.Візміть тормозний барабан з авто,або маховик.Бо не треба робити такий що ви зробили.Він як куряче яйце кривий 😂
Hola: Como llegó a Polonia la costumbre de usar yerba mate? Aquí en Argentina (América del Sur) la costumbre vino hace siglos de un país vecino de nombre Paraguay, allí vivía una colectividad nativa o indígena que usaba las hojas de la planta (previo deshidratado para eliminar lo tóxico) y preparaban una infusión como se hace con el té.
¡Hola! No estoy seguro de cómo llegó a Polonia. Había un tipo llamado Wojciech Cejrowski, una persona bastante famosa que viajaba por el mundo y probablemente fue uno de los primeros en difundirlo por aquí a la gente. Al menos por lo que he oído, pero tal vez ya estuviera aquí antes :)
@@GBWM_CNC Yep, miter saw. Except for changing bearings, near zero maintenance. I use coolant and blade with inserts, for steel and ss. For bandasw is needed sharpening, plus very easy can break. The worst part is when it is needed to fix it.
Incorrect. Band saws don't through large amount of sparks nor create a lot of metal dust and thus are much cleaner. Band saws also produce much less heat during cutting and can often even cut thick steel without needing active cooling to prevent work hardening. And lastly, you can turn a metal band saw upright and with the addition of a simple plate of metal as a cutting platform/table you can use it to literally figure saw through metal, physically impossible with a chop saw.
Teşekkürler! Boyutlardan bazıları videoda görünüyor ve müşterilerim için birkaç çizim sunuyorum. Belirli bir boyuta ihtiyacınız varsa bana bildirin, sizin için ölçmeye çalışacağım
bro... do you not ever out do yourself? amazing video and fucking B-E-A-UTIFUL content. I wish i could have you tutor me in CAD.. just got my rig up and running again now that i got Starlink and have fast enough internet to utilize it
I have to say that this is the best DIY bandsaw I've ever seen. Especially the vertical option. This bandsaw should be the standard for all horizontal bandsaw machines across the board.
So glad to hear that! I think it has a bit room for improvement though! :)
Thanks for not wasting time with useless dialogue. Nice boardshorts! Aloha!
Adding a coolant feed and reservoir helps with blade life. Excellent product and video. Thanks!
Im glad you like it! :) i have already some upgardes in my mind - including the feed coolant
This was a really fun project! Thanks everyone for for following my work.
PCBWay.com - thank you for sending me one of the band saw wheels - it was a pleasure to mount in the machine. With no doubt I can recommend your service! :)
If you enjoyed - please leave me a like and subscribe for more fun projects!
You do very nice DIY projects , this metal band saw build being one that stands out ! Thank you !
So glad to hear that!
Realy nice saw i would like it in my workshop. Respect from Czech Republick
I'm so glad you like it! Greetings from Poland :)
Best of the best! I can never dream of fabricating such a great piece of engineering but your video occupied position one in my library. I loved so much your cutting prowess coupled with your tig welding skills. I wish I could like it 100k times. Thank you so much for sharing
So happy to hear you like my work! thank you :)
You should have wiper/dust guard in front of the blade guide bearings to prevent shavings getting between the blade and the guide bearings.
You're right! I will have to think about something like that
What a pleasure for us to be a part of your compaign!
the pleasure is all mine :)
🥂🥂@@GBWM_CNC
Realy nice band saw,great job. Respect from Transilvania Romania
Thank you! I'm glad you like my work
I'm a mechanic, and I'm building a workshop, I like your car, do you have any details, I'd like to build one for myself, I greet you with respect
Nicely done! Thanks for showing.
i'm glad you enjoyed! :)
That is hands down hilarious and one of the funniest examples of mistaken identity. As to a Prosecutor or a Judge offering to cut a better deal for simply knowing “the correct attorney” hits close to home to examples in my own youth.
The law often has a large breadth of scale for penalties (the difference between paying $100 vs $5000 or whether you serve jail time or not is quite big) and since it’s entirely up to the Prosecutor or Judge to determine where along that scale your punishment should be, having a good word on your behalf of someone acquainted with those determining the penalty really can go a long way.
Defuq are you talking about?
That was a big project. I'm impressed that you completed it. It is leaving a very square cut on the end of the workpiece! I would like to see the Pivot Point directly over the work piece. If you add flood coolant I would like to see the rest of the video.
i'm not sure if I will add flood coolant to this particular version of the machine - maybe in the future in a new version of it (already have some upgrades in mind including coolant). Not sure what you mean about the pivot point though
Excellent work🙂
Thanks!
A beautiful 'ever green' tool...my compliments :-)👍
haha! thank you! :)
Very nice job :) Just few tips: try to make wheels for at least 20mm blades... This 13mm tend to brake after few cuts. Also, wheels shouldn't be closed on both sides, on teeth side on the blade should be open and teeth must be in the air so chips will fall out and when you tighten the blade, teeths would not be straighten...
Maybe when I build a new band saw I will use those hints as there are some small things I noticted after puting it together that could be changed. But for now I used already a bit this saw and works fine for now with the 13mm blade. You're right - the wheels could easily be opened on one side. But I don't exactly get the idea about the teeths that would not be straighten. Could you explain what you mean?
@@GBWM_CNC teeths are in criss cross patern, they are left right if you know what i mean? And when you tighten the blade and teeth are touching the wheel, they get straightened.
@@mojamalaradionica5091 oh snap, I get your point now. So with a 20mm blade the wheel size should let the teeth run outside the wheel. Thank you for your input. I will watch how it behaves as it is now and if it will be an issue I will fix this in the future or even maybe build a new one with all issues fixed
@@GBWM_CNC with all balde sizes should be like that, that's why i said you should make wheels for bigger blade. Even with 13mm teeth it should be 2mm outside the wheel. With 20mm also 2mm outside the wheel. If you straighten the teeth blade will not cut well or it will get dull very soon.
@@mojamalaradionica5091 I get the point now. Will see if the teeth actually will straighteen and how long will it take
Very good job GBWM
Thank you! :)
Hello! are the plans available? congratulations, nice work
Hi! I'm sharing the plans I use with my patrons. But these are not exact plans - just the idea let's say :)
Bonjour super proget,ou peux ont acheté les plans merci.
@@joachimruelle8445 Salut. Je ne vends pas de documentation, mais je partage les dessins que j'avais pour mes besoins pour construire cette machine avec les mécènes de la chaîne :)
Great job as usual. A beauty. Greet from Slovakia
Thanks a lot! Greetings from Poland!
Хороший станок, ленточного полотна насколько хватает?
Спасибо! Я не помню, сколько ленты было использовано, но, возможно, 3-4 патрона.
Outstanding work!
doing my best!
Amazing work 💯
thanks!
Extraordinario proyecto, gracias por compartir
Me alegro de que te guste :)
Bonjour avez vous un schéma de fabrication , merci beaucoup
Nice video. I really dislike the tea parts though.
thanks. it's not tea - it's yerba mate :)
Buenas noches compañero, podrias poner un enlace de donde compro el piston hidraulico y sus ascesorios muchas gracias saludos desde España
¡Hola! Compré todo en sitios de subastas locales de mi país.
Uep! Una maravilla el trabajo pero más el MATE! Sos Arg? Un abrazo y genial el laburo
¡Gracias! :) Soy de Polonia, ¡ja! :)
Hello, I also have a band saw that runs on 380w and I only have 220w, could I put a motor on it to run on 220w? The saw is called Holzmann BS128HDR 400 V. There is also a 220 V version, but I can't find specifications for the motor. Thank you
I'm not familiar with those. But if all other parameters would be the same just the voltage was different - I see no problems
Una maravilla hermano, de donde sos que tomar mate? Saludos desde argentina
¡Polonia aquí! Gracias por traer esa increíble bebida a nuestro país, ¡jaja! :)
Very good information ❤ for creative people keep it up 👍
i'm glad you like it! :)
Você tem o projeto pra venda?
No vendo nada. Esto es sólo algo de hobby. Pero algunos dibujos que tengo están disponibles para mis mecenas, pero eso no es nada profesional, sólo por la idea que también se desprende del vídeo.
Mam nadzieję że z następnego projekty wyciśniesz ile się da :) a ten super :)
No lekutko! :) Plany już są! ^^
Nice project, and it's also refreshing to see that you drink Mate too :)
thanks! yes - yerba mate is so refreshing, haha!
Hey y’all … I have some sawdust, bark, and grass clippings I’ll sell you for your “tea”! 29.95 US for a 6” compressed cube! If you order right now, I’ll throw in some GENUINE mulched up maple leaves at no extra charge!
Badass! How do I find the plans and materials needed for this?
Thanks! I dont have exact plans but I shared some drawings with all my patrons :)
Witam widzę Kawał pracy wykonajej przytej pile mam takie pytanie w sprawie silownika jak dobrałeś parametry pod ciężar swojej pily bo mam pile prome i padł mi silownik a oryginalne sa beznadziejne i po roku lub dwóch padnie nowy czy byłbyś wstanie doradzić jaki dobrać siłownik i
Szczerze mówiąc, to po prostu znalazłem siłownik, który skokiem / rozmiarami się zgadzał z projektem, a następnie wyznaczyłem orientacyjnie masę ramienia tnącego i sprawdziłem, czy ciśnienie wygenerowane przez taką masę na siłowniku nie przekroczy dopuszczalnego dla tego siłownika pneumatycznego (max ~10 bar dla siłowników pneumatycznych z reguły). Wzór na ciśnienie, to po prostu siła przez pole powierzchni nacisku (należy wziąć pod uwagę powierzchnię tłoczyska - dużo informacji jest w sieci na ten temat).
Отличная работа!
Спасибо! :)
Też miałem robić nową ale na razie brak czasu.
Gadałem z Witkiem myślę że uda się zgadać na spotkanie :)
Też narzekam na brak czasu ale na tworzenie maszyn zawsze znajdzie się chwila :) Projekt rozpoczęty w maju a wydawało się, że przez majówkę siądzie na gotowo.
Nie mogę się doczekać, haha! :)
A co sądzicie o tym kole napędowym? Czy takie prowadzenie taśmy jest ok? Fabryczne koła mają inny kształt. Bez drugiego karbu. Zęby ida w powietrzu
@@NATAN5064 W zasadzie tak też powinno być - z czasem pewnie zęby zaczną uszkadzać powierzchnię kół o czym szczerze nawet wcześniej nie myślałem. Po wykonaniu tej maszyny widzę pole do poprawek przy okazji budowy kolejnej :)
Tem o projeto e. PDF?
what kind of welding do you use?!!
MIG and TIG depending on which you mean. The frame was MIG welded (with sparks) and most of the other parts were TIG welded (usually without sparks).
@@GBWM_CNC Thanks!
HI CAN YOU SEND COMPLETE PDF OF BAND SAW
Отличная работа!!!
Можете поделиться чертежами?
Спасибо! Я всегда делюсь рисунками своих работ со своими покровителями.
Hello, can you tell me what is the name of 3D program you use for design?
Hi! I used fusion 360 for that build
I recommend you also Solid Edge for free use
@@artystamechanik9609 Recently I'm using ZW3D for my new projects and honestly It's quite a good piece of CAD software considering it's price. Also most of the softwares available are subscription-licenses now and ZW3D is still possible to buy for lifetime. I've been using Solid Edge in school but I didn't like it much but that's been much years ago (maybe it has changed after so many years though). Fusion 360 is really cool - the only thing I dislike there is the assembling module.
Obejżałem wszystkie odcinki z etapów budowy a i ten też chętnie w wolnym czasie. 👍😀
Ps. Fajnie że udostępniłeś napisy. Można sobie włączyć tłumaczenie na PC jak się czegoś nie zrozumie, u mnie angielski jeszcze slaby😊
Bardzo się cieszę, że podoba się moja praca. Miło widzieć, że ktoś ma chęci oglądać efekty moich wysiłków :) zawsze staram się robić napisy na większości filmów. Dzięki za oglądanie! :)
@@GBWM_CNCa1৳qq1Q
@@GBWM_CNCQ
Probablemente sea U. Uruguayo o ARGENTINO. LE FELICITO POR EL DISEÑO. mE PERMITO SUGERIRLE QUE SI PONE EL MOTOR DEL LADO DE ABAJO Y HACE QUE EL CAMBIO DE LA HOJA SEA POR ARRIBA, FACILITA LA TAREA DEL CAMBIO DE LA HOJA
¡Soy polaco, jaja! :) Me alegra que te guste el diseño. Creo que si el motor estuviera averiado, la distribución masiva no sería tan buena. Pero sí, cambiar la cuchilla sería mucho más fácil.
Grt job i want to build something like this
feel free! :) every experience is worthful
Sehr Gut gemacht. Gefällt mir sehr. Möchte auch eine bauen. Hast Du vielleicht einen Plan von deiner Metallbandsäge gemacht, den DU mir zukommen lassen kannst Bitte!?
Danke! Ich habe keine perfekten Pläne gemacht, aber ich habe die Zeichnungen, die ich während dieses Projekts verwendet habe, mit meinen Gönnern geteilt :)
kannst du mir die zeichnungen zukommen lassen BITTE, DANKE
Witam czy mógłbyś podać parametry siłownika
40x200 ISO 15552/6431 - 40mm średnica tłoka i 200mm skoku
@@GBWM_CNC dziękuję
Femi ng 160 este perfect
Que raro esa forma de tomar mate!
¿por qué?
Something is wrong, the teeth of the belt cannot touch the wheels that move it, the rest is perfect.
yes, you're right! this is my first bandsaw though. The next one will be better! :)
@@GBWM_CNC Також зараз роблю стрічкову пилу ) Я б вам радив замінити той ролік що ви зробили.Візміть тормозний барабан з авто,або маховик.Бо не треба робити такий що ви зробили.Він як куряче яйце кривий 😂
Hola:
Como llegó a Polonia la costumbre de usar yerba mate?
Aquí en Argentina (América del Sur) la costumbre vino hace siglos de un país vecino de nombre Paraguay, allí vivía una colectividad nativa o indígena que usaba las hojas de la planta (previo deshidratado para eliminar lo tóxico) y preparaban una infusión como se hace con el té.
¡Hola! No estoy seguro de cómo llegó a Polonia. Había un tipo llamado Wojciech Cejrowski, una persona bastante famosa que viajaba por el mundo y probablemente fue uno de los primeros en difundirlo por aquí a la gente. Al menos por lo que he oído, pero tal vez ya estuviera aquí antes :)
Not bad, but circular steel disc much simpler and near zero maintenance.
What kind of disc? A mitter saw?
@@GBWM_CNC Yep, miter saw.
Except for changing bearings, near zero maintenance.
I use coolant and blade with inserts, for steel and ss.
For bandasw is needed sharpening, plus very easy can break. The worst part is when it is needed to fix it.
Mir fehlt die Minimalschmierung... Aber geiles Teil!
Genau, eine Schmierung wäre sinnvoll, allerdings hatte ich Angst, dass die Säge auf den Rädern durchrutschen könnte.
nice jazz! from your drink choice I'd say you were south american?
I should be. But im european :)
Saludarlo y felicitarlo un gran trabajo,al mismo tiempo quiera pedirle porfavor,si podría facilitarme las medidas
¡Gracias! ¿Qué dimensiones necesitas? :) Siempre comparto algunos dibujos con mis clientes si quieres ver más detalles.
Her name is : wretched witch of the east, but you was pretty close.
Oh snap
Tem os projeto de suas máquinas que possa fazer umas
Compartilhei alguns desenhos com meus patronos. Mas prefiro considerá-los como inspiração :)
Muy buen trabajo....los mates muy lavados...jajjaja
¡Ja ja! :)
what the heck are you drinkin? looks like saw dust! hahahaha
Almost , haha! it's called yerba mate
Great build, though since the advent of carbide metal chop saws, obsolete.
Hmm, the carbide metal chop saws have their cons too. The saws are really expensive and those are really loud. But yeah - much faster though
Incorrect. Band saws don't through large amount of sparks nor create a lot of metal dust and thus are much cleaner. Band saws also produce much less heat during cutting and can often even cut thick steel without needing active cooling to prevent work hardening. And lastly, you can turn a metal band saw upright and with the addition of a simple plate of metal as a cutting platform/table you can use it to literally figure saw through metal, physically impossible with a chop saw.
Merhaba ellerine sağlık. Mükemmel olmuş bana ölçüleri yazıp atarsan sevinirim
Teşekkürler! Boyutlardan bazıları videoda görünüyor ve müşterilerim için birkaç çizim sunuyorum. Belirli bir boyuta ihtiyacınız varsa bana bildirin, sizin için ölçmeye çalışacağım
Jest moc :)
no a jak! :)
Un mate y a seguir... 😅🇦🇷
:)
plans??
I didn't make exact plans but I always share some drawings with my patrons if you'd like to take a look :)
@@GBWM_CNCHi, where I can watch your plans?
☝️👍💪😉😁Надо тоже такой сделать Зимой🤔
Удачи вам с вашей машинкой! :)
Where are you from? I was sourprised to see you drink mate
Poland here! :)
Was that weed water?
That's yerba mate
@@GBWM_CNC I'm unfamiliar with it. I'm gonna check it out...
@@clintchapman4319 recommended! :)
like the bild, hate the camera work and editing, to much/quick/moving changing scene,s.
cheers ben
Tem o projeto
sim - compartilho com meus clientes alguns dos desenhos que usei
Супер❤
bro... do you not ever out do yourself? amazing video and fucking B-E-A-UTIFUL content. I wish i could have you tutor me in CAD.. just got my rig up and running again now that i got Starlink and have fast enough internet to utilize it
haha! i'm glad you like my work! is the internet from starlinks really good? where do you live if I could ask? interesting! :)
Your lighting is bad in some parts of the video. Great job on the machine.
I've improved mi lights in my workshop after that video, hopefully the recent videos are ok :)
@@GBWM_CNC 👏👏👏👏
Оборотов маловато)
E do torno mecanico
💪
💪
Project
❤❤❤🙏
:)
Why show footage of you having a drink? Totally distracts from the actual footage.... cba watching the rest
Oh snap. But the drink is so important!
What ARE you drinking?
it's yerba mate :)
@@GBWM_CNC in my country (Brazil) It's alao popular in the south
@@reinaldopelegrina9506Yeah, I know - actually it seems the origin of yerba is Brasil / Paraguay / Argentina. At least this is what i've heard :)
:)
Что траву курят я знал, но что бы её пили не слышал
хаха! это йерба, приятель
👍👍👍