▶️ Watch us set up a greenhouse here: ua-cam.com/video/8pwBL-4f4Io/v-deo.html VISIT GATECRAFTERS: www.gatecrafters.com/ Tonys channel: www.UA-cam.com/Tonystractoradventure
You might want to look into electric gate lock as well I have seen people punch on the gate and go through it and it mess up the elements on the gate it can harm it not only that if you get a bad wind that can mess it up as well. The gate look's nice great job on it 👍
Looks good! I like the wifes logo - Black Barn Blossoms. I installed the same Gatecrafters Estate Gate about two years ago. The quality seems good, good welds and paint is good. It arrived in almost mint condition, only a couple scratches and it was shipped all the way to California. Its crazy how light it is. Makes things easier on the gate opener and posts.
Looks a beauty bro, it will keep the ordinary trespasser out but not the unsavory ones but ya get that everywhere in society. Nice job guys. Safe travels
Rot Resistance: Rated as non-durable to perishable, with poor insect resistance. Can become discolored and stained when in contact with water, particularly in the porous growth ring areas. Red oak does not have the level of decay and rot resistance that white oak possesses.
Power poles are put in that way now. Fast and easy - two guys were working like dogs after pouring it in threw some dirt over it and then kept stomping on it as it pushed them over the top of the soil. End pole and no sweat.
looking like Beverly hills. you definitely need a electric gate latch to keep the wind from ripping the opener right off its hinges. I just installed one on my gate takes about 30 minutes to install
Cool setup. So now that’s it been running for awhile, do you still like it. Have the large posts moved at all using the foam? Oak posts…are those treated?
Nice gate Hank that should be good and solid and nice job installing it to great work not so hard to do either . should last a long time take care and God bless...
Good looking gate! I need me one. So if emergency people need in or the power company to read your meter they can just slide the pin out of the gate opener and push it open....😁🤗 But a serious question is if you are pulling a long trailer in and the gate starts shutting before you get in will the gate stop as it starts to hit the trailer? I often wondered about that on people's gates. I've never been around one.
@@HamiltonvilleFarm oh OK. Y'all "up town" down there. They still have to drive to the house but don't get out of the truck to read our meters. Water meter is electronic too.
Hi from uk guys👍👋 nice to see you improve the gate speed toosaves waiting a week for old one to open looks great and love the oak posts👌 thanks for your time and be safe see you soon
@@HamiltonvilleFarm 👍 also like the style of post fix expanding stuff 👌 how did It set like for you ok? Never seen that before thats all and you should paint ginas badge gold over black gate would look awesome👌 thanks again for your time sir 👍👋
Make sure you put a surge suppressor on that Estate swing opener. I had one that the board blew out on and Gatecrafters couldn’t supply a replacement. Still have the gates but went a different route with the openers after that experience.
If you like to get your holes straight and plumb, use a speed square. Hold the speed square against the post and use it as a guide to keep your drill bit straight.
Hace you ever thought of using those concrete form tubes as your gate posts? I'm sure you could put the hardware in the form before you pour. Just a thought.
I've never seen anything to set Poles in 5 minutes like that stuff pretty cool and has even holds the weight of the gate Thanks for the videos always good
@@HamiltonvilleFarm oh no worries my bad! Thanks for the quick reply. I'm getting ready to setup my gate but going with ghost. I'm just a retired E7 and don't have that big $$$ you got🤣
Hi Hank. Not looking to bad. Nice gate 👍. Although o think you may run into problems if you want to open the gate further than what it’s set for now. I think you should have hung it on the inside face of the post if your looking from your place to the highway, that way if you need to adjust it to open more you can without having to dismantle things. Just an idea 🙂
Just need some lights or colour perspect so it stands out from the black some colour of a blossom looks good but a bit of colour boom anyway all the best to you all
The best chance of giving those posts a decent life would have been to tar the bottoms that is in the ground to the top and then cement, it would have kept the bugs and water out. I would coat the upper part with a clear polyurethane with a UV protectant. As it is right now, the bottoms of the posts will act like a wick and draw up water, the bottoms of the posts will turn black and rotting will begin. I give them 6 years tops before they crack off. Ask me how I know....
Crazy fast and easy All u gotta do is just click a few times and call few people with your credit card ready for that crazy fast charging on your credit card. And here I was hoping to learning to weld and create new things but nope
I KNOW , U DID BOTH WAY PULLING POST OUT OF THE GROUND / LOADER BUCKET WILL BE BEST WAY EVERYTIME / WANT HURT REAR END FENDER LIKE U ALL MOST DID ? CURL LOADER BUCKET COMPLETE OPEN LOWER BUCKET ALL MOST 12 INCH FROM GROUND THEN TIE CHAIN AROUND THE POST THEN PULL UP POST , EZ - AS PIE !
This is going to put you on the spot Hank... you want us to like and subscribe but you don't want us to visit??? Whats up with that??? You hurt my little feelers Hankster the prankster. I do understand but watch a man trying to explain is so much better good/LOL
![How to build a POLE BARN on a hobby farm- Part 3 [2019]](http://i.ytimg.com/vi/ZTmePEc3XbQ/mqdefault.jpg)
![How to build a POLE BARN on a hobby farm- Part 3 [2019]](/img/tr.png)
▶️ Watch us set up a greenhouse here: ua-cam.com/video/8pwBL-4f4Io/v-deo.html
VISIT GATECRAFTERS: www.gatecrafters.com/
Tonys channel: www.UA-cam.com/Tonystractoradventure
You might want to look into electric gate lock as well I have seen people punch on the gate and go through it and it mess up the elements on the gate it can harm it not only that if you get a bad wind that can mess it up as well. The gate look's nice great job on it 👍
Looks good! I like the wifes logo - Black Barn Blossoms. I installed the same Gatecrafters Estate Gate about two years ago. The quality seems good, good welds and paint is good. It arrived in almost mint condition, only a couple scratches and it was shipped all the way to California. Its crazy how light it is. Makes things easier on the gate opener and posts.
For sure
Looks a beauty bro, it will keep the ordinary trespasser out but not the unsavory ones but ya get that everywhere in society. Nice job guys. Safe travels
Right on! Thanks Ken
That gate looks fabulous!
Rot Resistance: Rated as non-durable to perishable, with poor insect resistance. Can become discolored and stained when in contact with water, particularly in the porous growth ring areas. Red oak does not have the level of decay and rot resistance that white oak possesses.
That’s pretty high speed Hank! I like that!
Thanks brother!
Power poles are put in that way now. Fast and easy - two guys were working like dogs after pouring it in threw some dirt over it and then kept stomping on it as it pushed them over the top of the soil. End pole and no sweat.
For sure.
looking like Beverly hills. you definitely need a electric gate latch to keep the wind from ripping the opener right off its hinges. I just installed one on my gate takes about 30 minutes to install
Good idea!
You did a great job installing Gina's gate Hank. Looks nice. That Tony is a good friend.
Thanks 👍 Indeed
Cool setup. So now that’s it been running for awhile, do you still like it. Have the large posts moved at all using the foam?
Oak posts…are those treated?
Answer please
Just a little advice for the future paint or seal the post where it goes underground it prevents moisture and termite damage.
The fast2k is supposed to seal it👍
@@HamiltonvilleFarm you have to do the bottom of the post as well it also helps to put 4-6 inches of gravel for drainage under the posts.
Congrats on your electric gate. It looks awesome ! I am planning and saving for mine now for my desert cabin
You want to go to Birmingham you need to leave very early in the morning. From Florida I would say about midnight early.
Nice gate Hank that should be good and solid and nice job installing it to great work not so hard to do either . should last a long time take care and God bless...
Thanks for watching buddy!
Good looking gate! I need me one. So if emergency people need in or the power company to read your meter they can just slide the pin out of the gate opener and push it open....😁🤗 But a serious question is if you are pulling a long trailer in and the gate starts shutting before you get in will the gate stop as it starts to hit the trailer? I often wondered about that on people's gates. I've never been around one.
It has a "push back" sensor so it will not keep going if it hit your trailer. We don't have meter readers :)
@@HamiltonvilleFarm oh OK. Y'all "up town" down there. They still have to drive to the house but don't get out of the truck to read our meters. Water meter is electronic too.
Hi from uk guys👍👋 nice to see you improve the gate speed toosaves waiting a week for old one to open looks great and love the oak posts👌 thanks for your time and be safe see you soon
Cheers Mark
@@HamiltonvilleFarm 👍 also like the style of post fix expanding stuff 👌 how did It set like for you ok? Never seen that before thats all and you should paint ginas badge gold over black gate would look awesome👌 thanks again for your time sir 👍👋
Good to see Tonys fence posts in place.
Thanks Hank and Gina the gate looks awesome thanks again
Thanks Keith!
Make sure you put a surge suppressor on that Estate swing opener. I had one that the board blew out on and Gatecrafters couldn’t supply a replacement. Still have the gates but went a different route with the openers after that experience.
If you like to get your holes straight and plumb, use a speed square. Hold the speed square against the post and use it as a guide to keep your drill bit straight.
Hace you ever thought of using those concrete form tubes as your gate posts? I'm sure you could put the hardware in the form before you pour. Just a thought.
Were you haveing unwelcome vistors that you needed to install the gate?
No. My first gate was literally so slow it was crazy!
💥 Great video! Nice to see Tony.
*Keep on tractoring!*
Yes sir!
Trespassers and crazy fans! "Hank and Gina, can I have your autograph!" 😄😄 Looks great!! Excellent work Hank! 👍👍👍
LOL. Not at that level yet. Thanks for watching David!
You gonna get one of them cement ponds next ? Ya'll gettin mighty fancy down there
Lol. My wife wants one for sure.
I've never seen anything to set Poles in 5 minutes like that stuff pretty cool and has even holds the weight of the gate Thanks for the videos always good
It really is amazing
Awesome job and nice-looking gate.
Thanks buddy!
Hank, did you buy Tony lunch at the Cracker Barrel? Nice looking posts and gate. Enjoyed.
Lol. Of course! I told him he had to get water though😂
Wow 😯! Getting famous on UA-cam and gating up. Reminds me of Graceland ! TCB ⚡️Have a Blessed Day !
lol. I wanted music notes and dude playing guitar on it but Gina said no😂
Looks nice!! I always liked building gates for the welding outfits I worked for. I've got family in Graceville, Fla.
Right on… Graceville ain’t far
Looking good and God bless yall
God bless brother
Really good job been thinking about doing that myself I'm glad I watched your video is really helpful
It's been working great for a long time
cool nice install and protection except I would have used metal end mount posts
Great job on the gate. It looks great.
The post are ok, but I managed. 😂
Awesome job Hank it looks great
Thank you!
Well done Hank, very good job 👍👍🌟
Thanks!
Hello Hamiltonville farm you should purchase a Coleman powersports utv!
Hey Hank can you cover the cost for the gate and opener please for anyone interested in similar setup. Thanks brother!
The gate and opener prices are on the website. I usually don’t talk about prices because prices change so fast now days.
@@HamiltonvilleFarm oh no worries my bad! Thanks for the quick reply. I'm getting ready to setup my gate but going with ghost. I'm just a retired E7 and don't have that big $$$ you got🤣
lol. I hear ya Master Sgt.
@@HamiltonvilleFarm love ya brother! Appreciate your content as a 1st time army homesteader- ATW!
Looks great! You just need some music notes on it to….represent your bass playing and Gina’s singing. ⚡️🎸
Agreed 💯
Looking good y'all
Thanks buddy
Nice job Hank.
Thanks Scott.
Can you post a link to where you purchased the gate from?
It’s in the description of the video
Www.GateCrafters.com
I highly recommend it
Ya know a fella is on the level if his bubble is in the middle.
😎😎
You might want to finish the fence past 6’, those rascally trespassers just might drive around the end of your fence !!
For going out you may put a stop here line so gate doesn't take out the vehicle :)
Good idea
Still not ready to tell us those three things huh?
Looks like a nice gate
Nice to see Tony make an appearance
Yes sir 😄
Hi Hank. Not looking to bad. Nice gate 👍. Although o think you may run into problems if you want to open the gate further than what it’s set for now. I think you should have hung it on the inside face of the post if your looking from your place to the highway, that way if you need to adjust it to open more you can without having to dismantle things. Just an idea 🙂
Yeah for sure. I’m probably going to end up doing that in the future
What a great job hank! Very well done. It looks real nice!
Thank you buddy!
@@HamiltonvilleFarm you're welcome my friend!
Ok Elvis !
Thanks for taking viewers on your trip :)
Looks good! 👍
My 9 year old says "dad, we need one of those" and I said "then you wouldn't have a job".
👍😂
Is wally on light duty
Lol. Probably!
Just need some lights or colour perspect so it stands out from the black some colour of a blossom looks good but a bit of colour boom anyway all the best to you all
Thanks!
No matter what you post, a half dozen "experts" will pop up to tell you what you SHOULD have done 😜
lol. This is true. But it’s all good. Thanks for watching!
He should’ve carried that gate with his knees and not his back 😤 mine hurt just by watching
Nice drive gate hank well done great video to thanks for filming
Thanks!
That’s a nice gate setup!
Thanks much!
Woah nice gates
Thanks much!
@@HamiltonvilleFarm welcomed
Hi Hank Great Video's Did You Ya Forget About Wiley Again Ha Ha Aurora, Ohio
He wanted a vacation 😂
@@HamiltonvilleFarm Wiley deserve a vacation
Looks good and great work.
Thank you!
What part of Fla are you in?
Panhandle!
Love it!!!😮😮😮
The best chance of giving those posts a decent life would have been to tar the bottoms that is in the ground to the top and then cement, it would have kept the bugs and water out. I would coat the upper part with a clear polyurethane with a UV protectant.
As it is right now, the bottoms of the posts will act like a wick and draw up water, the bottoms of the posts will turn black and rotting will begin. I give them 6 years tops before they crack off. Ask me how I know....
Lol. I hope you’re wrong. 😄👍
@@HamiltonvilleFarm
Been there..., did that..., and had to redo it again.
Bare Oak don't fare none too well when its out exposed to the weather...
Crazy fast and easy All u gotta do is just click a few times and call few people with your credit card ready for that crazy fast charging on your credit card. And here I was hoping to learning to weld and create new things but nope
I'm going with a slider at my place, got to have it tight so the dogs don't get out.
Yeah good call
What was the total cost in rounded numbers if you care not to disclose. TY
nice gate
Thank you kind sire
I KNOW , U DID BOTH WAY PULLING POST OUT OF THE GROUND / LOADER BUCKET WILL BE BEST WAY EVERYTIME / WANT HURT REAR END FENDER LIKE U ALL MOST DID ?
CURL LOADER BUCKET COMPLETE OPEN LOWER BUCKET ALL MOST 12 INCH FROM GROUND THEN TIE CHAIN AROUND THE POST THEN PULL UP POST , EZ - AS PIE !
Hi
great job
Thanks!
@@HamiltonvilleFarm noo thank you for posting, gives me great ideas of things to do at the folks ranch, God bless my friend
nice job God Bless
👍🔧
I'm not buying it, it's Elvis opening and closing the gate. Lol
LOL. I wanted music notes and a guy playing guitar on the gate like Graceland...😂
Bom dia muito top serviço máquina amigo
Why didn’t you use 6 inch pipe for your post
Because we like the look of wooden post
Keep those Trespassers away brother
lol
😊😊
I would probably hit my head on the stop bracket.
Lol. I have to be aware it’s there 😂
Looks great Hank , I hope you shouted Tony for a couple of lunches for being a great buddy for supplying those posts ..
Lol… he got fed well 😁🔧👍
Vitor tor Porto
👍👍✌✌🚜🤠🇵🇹👑🇺🇸🤳
Should have gone with steel posts!9
Nah... these are still working awesome!
@@HamiltonvilleFarm steel is real buddy!
👋👋✌
👍👍👍👍👍😍
🤣 it's open says me
Nope… sesame
It's called " Hamiltongate ". What have you been hiding Mate? Open n shut case agin ya buddy. The Ole Fella from Downunda.
Lol
I tried that foam stuff on a mailbox it’s garbage
Not fast2k… you probably used Secca or whatever that brand is. That’s stuff is garbage. This stuff is legit.
Congrats on putting the gate up and running. it won't keep the animals out, go under it.
Thats not wiley!!!!!
After all that work and you decide to set your gate in wood using foam?! What in the world...?!
Been couple years and working great! Wouldn't change a thing!
That gate doesnt make your property look very welcoming or inviting.
!
This is going to put you on the spot Hank... you want us to like and subscribe but you don't want us to visit??? Whats up with that??? You hurt my little feelers Hankster the prankster. I do understand but watch a man trying to explain is so much better good/LOL
LOL.
Please remove that ugly post a gate commands attention pride so you need to put larger pillars to support the gate.
DIY? not everyone has access to a tractor.....
Jesus, its been over 10 minutes and you have done but talk... NEXT VIDEO PLEASE