2nd GEN Dodge RAM 1500 Pickup Truck HEMI SWAP | PART 4

Поділитися
Вставка

КОМЕНТАРІ • 111

  • @lukeetheridge77
    @lukeetheridge77 Рік тому +12

    I agree on painting the trans now

  • @ourladynd3580
    @ourladynd3580 Рік тому +3

    Luv ❤ how Holley and Hooker Headers have recognized your Mastery of Mopar World 🌎. I should say great companies recognize excellence in what you do. Your OCDness will make this an awesome truck in the end. ....great 2nd gen.

  • @claymillican25
    @claymillican25 Рік тому +1

    Looks good under the hood 💪💪

  • @dwaynenewberry8321
    @dwaynenewberry8321 Рік тому +2

    They flipped the springs to allow the springs to squat for drag racing.

  • @texasjefe
    @texasjefe Рік тому +3

    People used to do that for a softer ride when not hauling any weight

    • @mayeg3099
      @mayeg3099 Рік тому +1

      I think they drag raced this ss/t truck back in the day and weaken the leaf springs maybe.

  • @Eltakoochie
    @Eltakoochie Рік тому +2

    I would like to see it with the 8 speed because this is what I want to do to my 2nd gen

  • @brewaire
    @brewaire Рік тому +2

    I was feeling 6.4 exhaust manifolds, 6.4 cam, 6.4 intake, and a 100 shot of nitrous.
    Nice so far though.

  • @gilhernandez605
    @gilhernandez605 Рік тому +1

    Need 2 cover the trans in clear coat.

  • @417jackrabbit
    @417jackrabbit Рік тому +1

    On the leafspring pack they flipped the helper an heated the spring pack old way of lowering

  • @DarrensTruckzs
    @DarrensTruckzs Рік тому +3

    Overload springs probably were flipped for better weight transfer for drag racing at the track , those springs put back together with overloads back to proper way may still be good for someone that doesn’t carry any loads !! Could sell them John . Transmission came out nice after you stripped paint off it looks way better now!! Im very curious how thats going to be for rpm wise at highway speeds with jus a 3 speed 727 trans ? Unless it has 355 gears an not the 392 maybe it be ok but … It was really nice to see the track runs you did with the hellcat truck nice to see you outa the shop for a change need more videos outa the shop once an while 😁 Im enjoying this sst build very much !! 👍

  • @chasmilner3178
    @chasmilner3178 Рік тому +4

    I anxiously wait for you to get to buying, installing and wiring the electronics. Please share a detailed list of the components it takes to run a hemi in an older truck.

    • @bengeddes7453
      @bengeddes7453 Рік тому

      check out diyhemi channel.buddies got it down even sells harness2go

  • @codereddew1539
    @codereddew1539 Рік тому +1

    going to be a sweet little runner when its complete. If I wasn't purchasing a home I'd be all over it.

  • @TheRealRobM
    @TheRealRobM Рік тому +1

    racking my brain about back in the day. something is telling me flipping or removing the overload spring was done when using old school style Lakewood style traction bars.

  • @dalemllns
    @dalemllns Рік тому +1

    I've had great results with stock 392 manifolds on 5.7 Trucks. If you're not going max effort, they are great over the expense for headers. Just a thought.

  • @jamesbare9156
    @jamesbare9156 Рік тому +1

    You inspire me to work on my 2018 express 😎

  • @wesleyramirez3244
    @wesleyramirez3244 4 місяці тому

    Builds like this got me excited just acquired a 94' 1500 can't wait to swap it! Thanks for the motivation!

  • @NoVoice71
    @NoVoice71 Рік тому +1

    Overload springs where flip for weight transfer at the track

  • @davefriessen9897
    @davefriessen9897 Рік тому +1

    Gawdamn brother would you just look at that!!👌 Freaking minty man.

  • @tgtshirts1
    @tgtshirts1 Рік тому +1

    Great adventure..
    THUMBS UP !

  • @Unfinished-Business24
    @Unfinished-Business24 Рік тому +3

    Looks sick bro but definitely would paint the transmission too

  • @inspirationalphotography2656
    @inspirationalphotography2656 Рік тому +1

    cool truck

  • @RIZZ0B
    @RIZZ0B Рік тому +5

    This is coming along well! I wish I had the funds because I’d love to purchase it when complete. I know you’ll have this thing running right!

  • @mayeg3099
    @mayeg3099 Рік тому +4

    Looks like factory and clean now. Great build and project. 😎

    • @mayeg3099
      @mayeg3099 Рік тому +2

      Maybe the leaf springs bowed when they were drag racing the SS/T? It had no cal tracs or ladder bars. 🔧🔩

  • @mattvilla6614
    @mattvilla6614 Рік тому +2

    Dude your beast man you do everything right and so well and the videos are always edited so well man. I really enjoy your content man good job!

  • @rhgarage5762
    @rhgarage5762 Рік тому

    I know a few of us would flip the overload when we lowered those dodge's back in the early 2000's to soften the ride

  • @joshuabarton6635
    @joshuabarton6635 Рік тому

    Nice build! Keep the sst wheels and do a 4th gen rack and pinion!

  • @marcminor7049
    @marcminor7049 Рік тому

    I like this project, I'm always looking forward to the next step.

  • @gamecock2465
    @gamecock2465 Рік тому +1

    Dang that block needs some paint on it to be in an engine bay that clean.

  • @jrusted5.031
    @jrusted5.031 Рік тому

    I have been thinking about swapping a 2nd generation ram myself. Love the content!

  • @thepackoutdoors9435
    @thepackoutdoors9435 Рік тому

    It is a pretty bad ass swap but a 1st gen might take the cake 👀

  • @slim56
    @slim56 Рік тому +3

    I love this build, It would be sweet with an 8 speed. It would give much better drivability

    • @MrSpinDaBlock
      @MrSpinDaBlock Рік тому

      No lie bro

    • @ferberb9662
      @ferberb9662 Рік тому

      Yes I have a 95 and is still going after 28 years of driving I just changed the timing chain because it was making noise rattling I made the work my self and is so easy todo mechanical work they have a lot of room to work on

  • @dcrosby386
    @dcrosby386 Рік тому

    Need to get a small sandblaster for some of your smaller jobs removing paint. Trans definitely needs painted either black or the same blue as the stripes.

  • @1hit_1der58
    @1hit_1der58 Рік тому +2

    Coming along great! Always looking forward to the updates

  • @303ant420
    @303ant420 Рік тому +1

    Paint it for sure.

  • @johnplayer13
    @johnplayer13 Рік тому +1

    The project is coming together nicely!👍😀

  • @johnsmith-qz4bv
    @johnsmith-qz4bv Рік тому +1

    looking good....cool build .....

  • @Gladiatorguy1998
    @Gladiatorguy1998 Рік тому +1

    Truck is going to badass.

  • @DarkElite420
    @DarkElite420 Рік тому

    Nice video again as always brother. you should 8 speed swapp it. Can't wait to see this baby rocking

  • @2ndgenlife324
    @2ndgenlife324 Рік тому

    I have a 97 2wd and a 6.4 waiting and watching.

  • @chriswylie2011
    @chriswylie2011 Рік тому

    Awesome progress. Can't wait for more. Definitely paint the transmission.

  • @kevintibbits8993
    @kevintibbits8993 Рік тому +1

    Hell yea! Looking sweet! Reminds me of the helkota build. Oh wait is that a super charger? Only thing I’d say is ditch the 3 speed and install a 6 or 8 speed auto? Or maybe a 6 speed manual?

  • @MEMPHISBOI_901
    @MEMPHISBOI_901 Рік тому

    Dude you are a one man machine

  • @chriswilson6705
    @chriswilson6705 Рік тому +1

    Have you considered some electric cut-outs for it?

  • @ferberb9662
    @ferberb9662 Рік тому

    Yes I have a 95 and is still going after 28 years of driving I just changed the timing chain because it was making noise rattling I made the work my self and is so easy todo mechanical work they have a lot of room to work on

  • @boblee808
    @boblee808 Рік тому

    The overload leafs came from the factory in that position.

  • @kingmar2290
    @kingmar2290 Рік тому +1

    have a price in mind when its done?

  • @henryg683
    @henryg683 Рік тому +1

    Coming out amazing John I can’t wait to see it all finished and hopefully going down the track!!!!

  • @mironkusnecov5728
    @mironkusnecov5728 Рік тому

    You should change the steering to a 3rd gen rack/pinion. So much better with minimal effort. That way you have plenty of room for your ac compressor.

  • @miguellinksup7897
    @miguellinksup7897 Рік тому +1

    🔥🔥🔥🔥🔥🔥🔥

  • @mariahmarquez5566
    @mariahmarquez5566 Рік тому +1

    looks good excited to see it runnin 😮‍💨

  • @neilchilders5442
    @neilchilders5442 Рік тому +1

    I think you should keep the factory wheels just to keep the original look.

  • @mikebiron7339
    @mikebiron7339 Рік тому +1

    There are 2 kinds of 727's. Internal or external balanced, done with the flywheel. Do you know which one you have? I went through that headache with my 68 charger.

  • @jamalyellowhair1841
    @jamalyellowhair1841 Рік тому +1

    Where can I get that engine mounts ?

  • @TheRealRobM
    @TheRealRobM Рік тому +1

    "if we ever want to put a hellcat blower on here"... we want 😂

  • @t_crom
    @t_crom Рік тому

    i kind of like the patina exterior

  • @Dalamjalam
    @Dalamjalam Рік тому

    Should run a 6.4l truck intake , they flow better and swap to a 6.4l factory camshaft . Cheap power and factory parts

  • @jmihalchik98
    @jmihalchik98 Рік тому +1

    Which version of the hooker headers are those?

  • @drufetti510
    @drufetti510 Рік тому

    This 2nd gen is gonna be badass

  • @ZCE-bp8pl
    @ZCE-bp8pl Рік тому

    SS/T really didn't have anything special from the factory. It was mainly an appearance package. The only add ons from the factory that was different from other 94-01 rams was a muffler and tailpipe, as well as the wheels and stripes. No suspension differences.
    Looking forward to more videos. I starting to lean towards swapping a hemi into my 98 SS/T.

  • @juanmadera3496
    @juanmadera3496 Рік тому

    ONDGAS should hit you up, they have a slammed 2nd gen they were looking for a hellcat swap ,That would be good content with the texas boys

  • @mariahmarquez5566
    @mariahmarquez5566 Рік тому +1

    get a limited slip diff 💨Ⓜ️

  • @JayPoo1321
    @JayPoo1321 Рік тому

    So the springs are sacked out? Lol!

  • @BBDos
    @BBDos Рік тому

    Cant wait to see this done. What color is the Dakota painted? What year Hemi engine is installed in this? THx

  • @T-Dawg6.7
    @T-Dawg6.7 Рік тому

    Carven all the way for exhaust

  • @ZCE-bp8pl
    @ZCE-bp8pl Рік тому

    What model year of mounts are being used in this video? The more i watch of this series, the more im leaning towards hemi swapping my 98 SS/T.

  • @T-Dawg6.7
    @T-Dawg6.7 Рік тому

    Just curious why not go with a 8 speed? Not sure if you covered that or not

  • @davidhenson3372
    @davidhenson3372 Рік тому

    Curious why you're not going with the trans that came in the truck originally? Or even the 512?

  • @kenthomann8047
    @kenthomann8047 Рік тому +1

    Lookin Good👍

  • @rickyteague447
    @rickyteague447 Рік тому

    Good job

  • @aceblack53
    @aceblack53 Рік тому

    Love it!! Thanks for sharing man 👌🏻😎

  • @martyposinski6392
    @martyposinski6392 Рік тому +1

    Very nice progress bro. Looking forward to the next video. Can you start out with naturally aspirated performance mods for those of us who want be able to afford turbo charger, or a supercharger setup? Will you put an engine oil cooler system on it as well? I think that is always a good idea when doing these type of mods, you are able to run extra amounts of oil, 😃 it’s kinda like an insurance policy. I know Holley has some of that stuff. ❤ the work!

  • @417jackrabbit
    @417jackrabbit Рік тому

    Any ideal on how to chat about purchasing?

  • @jasinpedone3020
    @jasinpedone3020 Рік тому

    I am interested in putting a hellcat engine in a third gen but it 4 wheel drive

  • @billyreece4445
    @billyreece4445 Рік тому

    Is it the OEM for the 2nd gen dodge or the 3rd gen?

  • @chrissweet4250
    @chrissweet4250 7 місяців тому

    Those wheels are indy ram and sst only if you decide to sell let me know I fave 2 indy rams

  • @raykatinsky7099
    @raykatinsky7099 Рік тому +1

    Paint the trans. Please. Black.

  • @ZROSTARS
    @ZROSTARS Рік тому

    why use the old transmission for the HEMI🤔

  • @gunsandhorsepower
    @gunsandhorsepower Рік тому +1

    What would be a better engine for a 2001 dodge ram 1500 4x4 4wd a 5.7 or a 6.4 with a forged MMX drop in piston combo cause eventually after hemi swap the 4x4 may want to boost it

    • @murdered4269
      @murdered4269 Рік тому

      5.7 stroked and bored out to a 397 imo honestly

    • @mayeg3099
      @mayeg3099 Рік тому +1

      6.4L HEMI

  • @brucewilson1118
    @brucewilson1118 Рік тому

    Why wouldn’t you do old school motor on the 2nd gen? It would be way cooler build

  • @Ezekiellife
    @Ezekiellife Рік тому

    I use bread to remove callers

  • @willardwright2409
    @willardwright2409 Рік тому

    What motor mounts are you using?

    • @BoostedMotorsports
      @BoostedMotorsports  Рік тому

      OEM style mount. We sell the mounts with install instructions. Email boostedmotorsports88@gmail.com

  • @MrJMagoo
    @MrJMagoo Рік тому

    DO IT! I know your OCD is working on you

  • @willmatic84
    @willmatic84 Рік тому +2

    This project gets more and more interesting loving it 😌👌🏽 #BSTEDMTRSPRTS

  • @jasonsullivan324
    @jasonsullivan324 Рік тому

    You should do a giveaway where you hemi swap someone else's truck. Would make great content and I for one would 1000% enter for my 06 4.7 6 speed single cab would appreciate it 😂

  • @billhacker5189
    @billhacker5189 Рік тому

    i would replace it

  • @hoguejoey
    @hoguejoey Рік тому +1

    Paint it

  • @LeakyJoosbox
    @LeakyJoosbox Рік тому

    Based on your scientific test, i bet the owner flipped the spring to soften the rear suspension so it would hook better on the track

  • @think1stproductions
    @think1stproductions Рік тому

    🤔🚫🧢💯💪🙏🎬🎤🍿📸🚐☁️🥶👿

  • @TheProchargedmopar
    @TheProchargedmopar Рік тому

    👍💪

  • @24hardwood
    @24hardwood Рік тому +1

    it's a Dodge

  • @bengeddes7453
    @bengeddes7453 Рік тому

    machine grey or take her down to her birthday suit

  • @chevyv20
    @chevyv20 Рік тому +1

    Another awesome job buddy! I can't wait to see the end results! She's going to be beautiful! GOD BLESS YOU! Keep up the good work!

  • @josetinajero9116
    @josetinajero9116 Рік тому

    That’s a 4th gen hemi

  • @toddianuzzi
    @toddianuzzi Рік тому

    Don’t paint the exterior, leave it looking like that and race it!

  • @TheGriimReefer
    @TheGriimReefer Рік тому

    Your 🏳️‍🌈 if you sell it 2nd gens are elite

  • @think1stproductions
    @think1stproductions Рік тому

    HELL YEAH BROTHER...
    THAT'S what I'm talking about...
    🤔🚫🧢💯💪🎬🚛☁️🚛☁️🛻☁️🚐☁️🚐☁️
    #BOOSTEDMOTORSPORTS #HELLKOTA #HELLRAM #CHICKENNUGGIES #MCDODGES #HELLCATSWAPTHEWORLD

  • @taylorh3930
    @taylorh3930 Рік тому

    Why not go with a overdrive trans🤷

  • @TheProchargedmopar
    @TheProchargedmopar Рік тому

    👍💪