2nd Gen Dodge Ram 1500 HEMI Engine Swap 94-01
Вставка
- Опубліковано 13 гру 2022
- 2nd Gen Dodge Ram 1500 HEMI Engine Swap 94-01 we remove the 5.9l v8 magnum 360 engine and replace it with a gen lll hemi 5.7L engine from the 4th gen RAM1500 pickup truck but this will be the same engine swap if you have a 5.2l v8 magnum 318 motor in your 1994 to 2001 ram 1500 pickup truck 2wd rear wheel drive trucks to get it swapped with the old engine removed and the new engine removal and install
#dodge #mopar #hemi #trucks
Click HERE for the same engine mounts we modified in this video
www.holley.com/products/engin... - Авто та транспорт
Who else thinks he can make a business with something like this. Gen 3 Hemi swapping these trucks
Absolutely right I discuss with him and he may lean to that decision by himself one day soon.
100% can't wait to see everything fully worked out so I can attempt this on my 2001 dodge ram 2500 4x4 crew cab shortbox. Wish your were doing the 4x4 version with the gen 3 hemi and tranny with transfer case so we could follow along but this is a great start and you got me pumped up for this build. Good Job brother
I think he does it for a living all ready
I want to do this to my 1998 Dodge Durango
Gen 3 hemis are Garbage, the magnum motor just needs more aftermarket support
The swap I’ve always wanted to see! Hell yeah🤘🏼
💪💪💪
@@BoostedMotorsports Yayyy lets go I wanna do this to mine lol
I have a white/blue SS/T right now with the engine out seriously interested in swapping in a 392
You definitely would make a killing selling 94-01 motor mounts. I’m ready to bring 94 Ram back to life
This was right on time, Im doing a Hemi swap on a 1998, I learned a lot.
The KING of Mopar swaps !! Good job !!
Definitely need to do the swap into a 2nd gen Ram 4x4
Am I the only one that thinks he should swap the Viper V10s, then put the 2nd gen viper motor in the SST with the 8speed transmission? Lol
Niiiiiice! It's about time you get to work on that! I was starting to think you didn't get it.
Already looking forward to the next video 🤘🏽👍🏽
An 8 speed swap video would be dope since there's none anywhere. Looking forward to seeing the 727 too
DEFINITELY interested in that as well.
The SST made it into the inner sanctum!!!! Can’t wait to see the progress on this truck should prove to be very interesting!!!!
Definitely interested in the mounts. Really interested in this build, looking foreword to future videos.
This is so awesome. Just picked up a second gen Ram. If only I had the skills haha. Love the channel man.
1 of my favorite garages on UA-cam. Keep up the grind
Aww now I remember you now with the hellcat swap I gotta subscribe man I remember when you was working on that dakota lol hell yea!💪🏾💪🏾
Hell yes,I love the 2nd gen rams and can't wait to see how this turns out
100% would buy these mounts
Glad someone is finally doing these,i have 2 second gens,2 door extended cab,ive been debating on re building the engine or putting a hemi in it
Prefect video. Very helpful and awesome to see a solution to get the hemi in relatively easy.
Just got a new subscriber. This is exactly what I want to do with my 97!
Definitely may need those mounts if I end up doing the swap in a 98 Laramie slt 4x4 swb reg cab. Had the 5.2 now
I'm so glad I stumbled across your videos. I own a 97 sst as well and have a 5.7 hemi sitting in my garage
Welcome aboard!
“Dont cut the sst what are you doing? Dont cut that thing its weird” had me laughing way too much than it should have
Enjoy the video. love the modification you do.
Thumbs UP!!
I am looking in to do that same swap on my 01 scsb and wish there was more support for this swap in second gens. I would 100% buy them if they were available.
I think we should start calling john “the HeMi Whisperer “ What do ya all think lol.. an I would cut it jus the same as you did john.. its what makes the most sense .. 99.9 % sure no one will ever want to put a 5.9 back in .. i wouldn’t after having a nice 5.7 in it.. you did the right thing bro 👍💯an it looks factory like again like you always make them look lol .. im lookin forward to seeing how it works an drives with the big 727 trans .. really excited for this build bro 💯👍
I would definitely be interested in the mounts. Thought about doing this to my truck already.
I would love one got a 2001 Ram 1500 with a 3.9L V6 and been looking into doing a swap can't wait to see how it comes out so I can do the same on my truck
Ive got my 96 ram sport and would love to do this same swap but with a manual transmission, i also would love to work on these kind of swaps for a buisness im all excited to see this all the way!! Keep it up!!!
Definitely want the engine mounts!!
You are the man!Love these videos.
What I love about your channel is you have all the mopars that were collectors to me the srts the RTS the ssts every vehicle that you have is either a monument for Mopar or is a to me in my eyes is a collector's item because there's not very many of them dude you have an awesome collection I love it man I dream of having what you have literally them vehicles are the same ones that I really want I talk about them all the time to my wife and my son one day one day
Alright! New build time? Cool!
That TorqueFlight will be amazing behind that Hemi if you keep it in there. It’s a perfect drag racing transmission and they’re strong. I had one in my 75 Dodge D150 with a shift kit and the shifts were so firm. And it held gear without any convwrns of slipping.
Same thing with the transmission that came factory in the 94-01/02s, you build them a little and they’re some of the best transmissions out there.
Yes please let’s get some mounts made!!
Damn good job looking forward to seeing it dune
I've been wanting to do a hemi swap in my 2000 ram sport for some time now but have been busy with other life shit and my other projects. But if it works out I most likely would scoop up a set of mounts. And I got a friend who has a few hemis laying around in wrecked trucks and cars in his towing scrap yard may be able to scoop one pretty cheap too.
That’s my dream, I have a 96 that my grandma pa bought new and sold to me for blue book in 06’. I have a modern 5.7 engine and trans and want to swap it… so I’m real curious as to how all this will work out for you. Great video!!!
I was having the same problem with my 1998 Gen 2 when I put my 2004 SRT10 Viper engine the driver side was the problem for the headers.
Best of luck but custom brackets are the way to go.
Please hurry and get these mounts on the market!
Did they say a estimate? I seen a bolt on 4th gen 5.7 run 11.9 would be wicked in a older truck
Yes on the mounts for sure.
nice work looking good i dont need the mounts but it would be awesome if they were avalible for purchese..
Definitely would be interested in the mounts. I been thinking this would be a good upgrade for my 01
I'm planning on swapping in a 3rd Gen into my 98, and would love to buy those mounts!
yes on the mounts!
Can’t wait to see what all has to go down
I’d buy a whole kit to if you made them lol
This is great stuff the electrical is what would stress me good info
Yeah buddy the shop looks complete with the John Deere rider in there haha👌🏁
I knew it was missing something! 🤣
I have a 96 Indy 500 truck. I would love a set of the mounts. Planning on hemi swapping it once my Magnum is complete
I know you've had issues with the 8spd transmission in the 4th Gen Rams but I'd like to see what steps you would take to overcome them and what aftermarket vendor's you would recommend for the third party computer to run the trans in a second gen.
Yes i would definitely like to purchase a pair..
Thanks for test fitting that for me. I've got a hemi sitting here. What did you do special to mate the 727 to the hemi? Can a 46re be used?
I have a 98 1500 single cab 2 wheel drive Ram been in a fire and throttle body etc was melted off top of motor. was only a 5.2 magnum and I have purchased a 2005 5.7 Hemi and trans out of a C300 car. I would be keen on a set of your mounts and then I can sort out the trans mount. any other info you can offer on this repower would be appreciated. I have been looking on net for while but most info is for repowering Dakotas this is the first most helpful site I have found great work.
I would definitely be interested in a more detailed description of the modification done to the frame as well as these mounts! I would love to be able to swap in a hemi a tad easier than trying to match power to some degree by stroking out the 360 mag
Agreed
Outstanding
Yes on the mounts I'll take the first ones
Great content John keep it comin,
I think that it'd be awesome to provide those mounts, for purchase! I'm sure your subscribers would appreciate it, for future upgrades.
Thanks Gary! 💪
I definitely want a set of mounts. I want to do a 392 in my 99 regular cab sb
I love your videos I have a 2014 Dodge Ram 5.7 and I love it what spark plugs do you recommend me for it ?
I would like to see some motor mounts for a third gen ram to fit hellcat swapped I'm pretty sure you would know all about that lmk and keep up the great work bro 💯👌
Is the 6.4 intake a worthy upgrade, maybe coupled with the bigger tb?
Hey did you paint the car lift it looks great! Also as for the gen 3 hemi swap do you think this would work for a 03 dodge durango?
Are you going to weld and make a road edge on the motor mount you trimmed ? Because when you cut the road edge off you took some strength out of the mount
My first truck when I was in 9th grade was a Dodge ram SST a 98 white with the Pepsi blue stripes I had it lowered cow ram Air hood 360 5.9 big block with headers lifters cam long to betters to the 40 series flows with 3-in tips coming out the passenger side and shoot a 3-ft flame and then I had it on American eagle five star deep dish 16 x12 and 1/2 with Cooper Cobra white wall tires with three virtual tech Hammer tens in it chameleon CD player and God was is she a beast
Y
The 46rh trans is controlled by 3 wire plug the center is hot the other two go to grounds thru a toggle switch arm the center fused the when you want to while driving shift in to OD THEN lock up.. bets the 727. Then you can run deeper gears. My 96 Reg cab short bet ran a best 14.4 at 95. With 5.9 on 3:90 gears
This has inspired me my dad passed in march i gpt his old 98 ram single cab 6ft bed he bought brand new when i was 11 i plan on doing the 5.7 swap will your motor mounts work on it cause its a v6 not a v8 i appreciate any input
Yes I need a set of those mounts for a 2000 dodge 2500 4x4
With the trans or would you use the original 2nd gen transmission?
What did you use for engine mounts and trans. I am in the process of doing the same swap
Are you going to put rack and pinion steering in this build?
Bravo John! I’m sitting in my garage looking at my SS/T and making her a bit nervous after watching this vid…😬 I assume the modified mounts would work on a 6.4 and 6.2 Hemi?
This chat has a weird accent 🤣
One suggestion would be use all 6.4 stuff.
Intake manifold, cam, possibly heads, 6.4 exhaust manifolds.
If I still had my old 96 Ram with 318 5 speed. I would have definitely done a hemi swap.
19:51 looks like changing the back spark plugs on the driver side would be a pain because the brake booster is in the way
I’m buying my Granddads 98 1500 that he’s had since brand new. I remember it coming home when I was 10 now 25 yrs later it’s mine and this is exactly what I want to do. It currently has the v8 magnum motor but mannn would I would doing a Hemi swap. Anywhere to get a full breakdown on what’s needed? Is it easier to buy a parts truck and take things off of that?
Hey man I have a 2004 Dakota crew cab and I just got my new headlights in and they have day time running lights on them. So my question to you is where did you splice these wires into on your Dakota to get them to work please?
im about to hemi swap my 2500 truck i have a sst that may get after the saftey thanks for the details
I have a 96 ram 1500 v6 that I would love to do a hemi swap too. It has sentimental value so I would love to get this upgrade going. Will this same swap and these same mounts work for me as well? It’s also a 2wd I would like to also convert it to a 4wd if that’s possible.
Will those mounts also work for a 04 hemi swap? It it generally the same as a gen3?
You living the dream
Just picked up a 2nd gen and thinking about this swap. What all you recon I’ll need for this?
ohh yesss 🔥
Sweet are you going to run it stand alone just to get going also are you keeping the internet stock
I need these mounts for my 98 SS/T.
Do you think there's any chance of running the Dakota longtubes? Or any other longtube headers?
I have my daily driver, a '98 Ram 4wd that I am planning on pulling off the road soon for a Hemi swap. I would definitely take a set of mounts. Also interested on how that 8spd fits and what mount work is needed there.
Same here! Let’s get those mounts going!!
I have a 2007 ram TRX short bed single cab 5.7 hemi was this truck a rare one to
I got a 94 I love a 5.2 but not a lot of power . Was thinking of a reliable engen and my brother lives GM and he gave me the truck after a life altering situation. So I fill like to bridge the gap between warers I was finna LS it but I hate GM . Are the hemis reliable . I've hered alot of issues with them just being grate then driving down the road they lock up low mileage
I want to hemi swap a B3500 van. Hopefully, the mounts get made. I assume it would be roughly the same chassis side mounts even though the van is a 1 ton chassis with a 5.9 magnum.
I would like to do that with my 96 ram 1500 4x4. Would the hemi bolt right up to my 5 speed or would i need an adapter plate?
So your dakota has the truck 5.7 hemi in it? I been browsing the web too see if could do that cause I want too do that swap....I'm about too check your page out an see if you have the information I'm looking for and if not..could you give some input on how too go about it? I have a 2000 dodge dakota 2.5l manual but I wanna do a whole hemi swap and trans with a automatic floor shifter
Out here doing God's work.
As soon as I seen your video and seen it it made me think about back in the day wondering where did you get that truck from by any chance did you get it from Georgia or do you know where it came from did it come from Georgia
if you pull the radiator supports and front bumper would make it easy
I need info on these engine mounts. Doing a 6.2 hellcat in my 1997 ram.
like it!! would like the mounts. following
I saw a video…someone said they put a hellcat supercharger on a 5.7 hemi would that really work ?
I've been looking around for a nice 2nd generation Ram regular cab shortbed for a Hemi swap. I ain't cutting up my SS/T. 😉
Needs a comma in the title. I was looking for a 2nd gen hemi. Lol
😂
Does the gen 3 hemi bolt up to a gen 2 transmission ?
What did you do with the 360?
Finally cause i have a 2nd gen sport 4x4 off-road edition and a hemi would be nice i wish someone did a 4x4 swap as well caise i whana now how to use a transmission alomg with a transfer casr
I agree 👍 I have a 2001 dodge ram 2500 4x4 and would like to throw a gen 3 with tranny In my truck. I would buy the mounts for the swap. Love the vids keep up the good work
I'm waiting too because I have an 03 QC SLT I'd love to swap a 5.7 6.4 or HC!!!
In the same boat. Would love to keep the 8spd and figure out the transfer case situation.
How much did u actually cut off tht bracket to shorten it???