The instructions that come with these shelves is shit for a beginner of doing things like this. You have saved a lot of people a lot of time. Thank you sir👍
dude, you're a lifesaver. I got the edsal brand 60in from Home Depot and the installation instructions I found online were terrible. couldn't figure out how to put the top and bottom beams together without it falling. your pull up and then hammer method worked flawlessly. I appreciate you. take care.
Your instructions were spot on. So simply explained and especially the part where we connect the top and bottom you made it look so simple and if followed right they were not difficult. Great video and thanks so much for making our job easier 👏👏
Thank you for this easy detailed instruction video cause if all I had was these instructions included in the box I'd be up the creek. So here it is 6 years later in 2023 & you've saved me Tons of frustration! Thank You! Thank You! Thank You! You're a Rock Star! 🤩👍
I need to take the time to personally thank you for this video. I cannot believe the awful instructions that came with the shelves. As soon as my girlfriend and I started arguing, I thought about searching UA-cam. You saved our day. THANK YOU FOR POSTING THIS
Thank you! I bought one of these and lost the instructions. This video was perfect, I had it put together in about a half an hour, no confusion, no mistakes, no wasted time trying to figure it out. Big help!
Saved my sanity. The instructions on how to get the top and bottom halves to mate were, to be kind, obscure. Watching you put this together gave me the information I needed to get this put together properly. Edsal should be paying you!
My wife threw everything and walked away saying I am fed up and you do this alone ... then i came across this video ... thanks you are a super star and a marriage saver 🤣🤣
We purchased six of the MuscleRacks from Walmart (four 48x24, two 48x18). My wife and daughter did all the assembly. The biggest problem they encountered was caused by bent metal ends of shelf supports where the rivet heads are attached. The bend in the metal was hard to notice but a slight bend will give you fits as the pair of rivet heads won't socket correctly into the pair the keyholes they're intended to lock into. My advice is to closely examine the pieces before you begin the assembly. Straightening the ends of the supports is easy and it will make the job much less frustrating. Our purchase of six units included a total of 240 rivet-ends on the 120 shelf support pieces. Four or five ends had slight bends that needed straightening.
Thanks Buddy - I bought a couple of these. I opened the box and got everything out. Took a look at the instructions and thought "here's a go" anyway I decided to give it a crack. Needless to say I couldn't make out anything but once I looked at your video a couple of times, I was able to get my shelves together. I just have the top left hand short side which won't slide correctly into position - everything else is perfect - oh well - I'll just stick something light up there ! Thanks again 🙂
This is the only helpful video I’ve come across. Thank you. I couldn’t figure out what side the braces point. You’re the only one who explained that the flat side needs to point up.
This is the best of the shelf assembly videos I've seen so far. The key is setting the bottom edge of the top post on the top edge of the bottom edge as you tap the braces into the keyholes. The metal is thin (thinner than the old shelves that came with our house), so the top post may slip off as you pound down. Keep trying and it should work if the end isn't bent too badly. You might find that one rivet bottoms out before the other, but that is probably OK as long as it is within the narrow part of the keyhole.
Thank you for this. I just bought the biggest they have of this shelf and my dad is worried I won't have the tools to put it together. I plan to send him this video to prove to him it is easy to put together. Again, thank you. You will have put his mind at ease.
I needed to thank you soooo much for this video....I was putting up this same exact shelving last night and Omg I could not figure out the second part to save my life lol. I was beside myself I stopped 6 attempts to take a moment because I was ready to scream lol..I am a woman...lol Then it hit me....Holy crap you tube... And there was your video doing the same exact shelving..If I could send you flowers omg I would..lol You helped me bigtime ...Thank you a million times over....Your the best...!!!!!!
Thank you. Getting the top and bottom together was... well, a lot of swear words were involved with that process and my husband and I may have yelled a bit. Finally I came onto youtube to see if there was help and your video was a lot of help actually. I never dreamed something this simple looking could be so incredibly difficult. I've built a lot of furniture over the years and I think getting the top and bottom together was probably one of the hardest things I've done.
Thank you sooooo much! I had the beams facing outward and I couldn't figure out the correct way to place them from these handwritten instructions with bad pictures.. I am so grateful you took time to make this video :-)
Hallelujah!!! A man made a video showing how to assemble these shelves. I had to write Edsal Customer Service twice, before they shared this video. How difficult would it be for Edsal to show this video's 'address' or link on the 1 page of instructions, to assist the person putting the shelf together?? I mean REALLY!!!
I’ve been struggling for days trying to figure out how to assemble this shelf that was given to me. I bought couplers online as I thought it was necessary only to find out they’re the wrong size. No other videos I found showed this. Thank you!
Mine came with couplings for attaching the vertical pieces together. A lot easier (and sturdier) than what you show. The Edsal model number was UR-245PBB (at Home Depot)
Thanks! I bought 4 sets of these at an estate sale. I had to disassemble them and there were no printed instructions. I tried reverse engineering how I took them down, but I hit a wall when it came to attaching the second tier of uprights. I had tapped the third set of crossbars into place, so there was no room to stack the uprights flush. Your instructions on this part saved me. Thanks again. Cheers!
Thank you so much. Hammer helped to get them sturdy enough to add the second level. We finally got the couplers to work however as we didn't want a shelf right at the mid-level. Very helpful video.
Thanks for giving me the confidence to do it un-assisted. I am 64 and very happy to have accomplished it on my own. Paper instructions are never as good.
Thanks for the vid..my wife bought one of these years ago and I looked at it and took it apart and cussed the whole time putting it back together which took awhile and today after watching ur vid I bought another one and put it together in 10 mins..very easy.
Had a muscle rack already, bought a second one. The new one fit together like the first, but the posts on the new one weren’t deep enough to fit like the first. I slashed my hand and then took a couple of days off from it! Thank you for the vid and the assistance!
Awesome. Thank you for showing us this shelf. I have an idea to convert one of these into multiple 4'x18"x2' reptile vivariums with space for storage and heat lamps.
Thank you so much! I struggled with this shelf for over an hour trying to figure out how to get the next level on there! Cursing, crying, and and in the fetal position on the ground
this company should be ASHAMED of how shitty their assembly instructions are written. Thank you for doing what a multimillion dollar company was unable to adequately explain. How these corporations get away with such bs is disgusting. You should get a commission from them for every view on here.
uberDoward I still can’t get the second posts to attach, so decided to do two shelve ship side by side, and the side pieces still won’t stay attached and I’m wailing on it with a mallet. This product is absolute SHIT. I’d like to take my mallet to MuscleRack and find the POs who greenlighted this product and show them how hard I can swing.
Thank you for your video. The directions where non-existent and I had no idea how to do it. Your video was awesome and I had it put together in no time!
@@uberDoward Thank you! It is in my home office now. You are a master doing it by yourself. My Mom and brother helped me hold pieces in place. Your video was a lifesaver. I am really happy with the finished product. Did you anchor your shelves to the wall?
These are a PITA to put together but once they are assembled, they are pretty solid. I found the particle board was too weak for my needs so I had Lowes cut up some 4x8 melamine. Much stronger and makes a better product overall.
Just took mine out of the box, took a look at the directions and then right to UA-cam! Thanks for making this video! Although I paid $84 for one on a Walmart black friday deal ugh. Thought I'd gotten a good bargain until now.
Thanks, I can’t install this with lousy instruction sheet I got in box. Walmart is giving 4 E couplers for extensions. I don’t think we need that and these e couplers make shelf unstable . I like your extension idea better
Thanks, I have only put together the type that comes with couplers to attach the top to the bottom. This saved me from having to wait for Edsal to send couplers.
Thanks for doing this. I bought the same unit. It says something about floor fastener or wall fastener. I really can't put it into the wall, but I was curious about how to fasten it onto the floor. I am really terrible at being a handyman, but I am very appreciate of you doing this and putting it on a video so I can do it.
I ended up just squeezing the tops into the bottom rack. It may be a little unstable but it holds pretty well, especially when I'm using the shelves for medium-light weight storage.
GREAT VIDEO! I could not figure out how to join the top with the bottom. They are easy to assemble and great shelves, I am using them for food storage.
My experience assembling solo taught me that putting the top half on works better if I snug all 4 corners up on the lower half and then just loosen the corner I am working on. Secure it and then move on to a different corner. Adding the next higher beam and brace as I go. Seems to prevent knocking opposite corner off while hammering. My assessment is it may be easier with 2 people but could destroy the relationship so better to go at it solo! (but nbd because the box says it assembles easily in minutes!😏)
I’ve seen all the videos for this shelf and this is the best video. I just ordered this from Walmart cause I have a few mid size and not to heavy yard tools I want to put on this. I know the shelf is cheap cause it’s a Walmart product but as long as it can hold a Weed wacker Two leaf blowers Tools Gas can and others light things then for $50 I call it a win/win .. the only problem I see is the cheap board Just don’t store heavy weight on 3rd or 4th shelf and all should be fine and definitely no liquid spills on these boards. Great video man
Thank you for the video. I was really getting frustrated on getting the second riser attached. I wasn't dividing the rivets for the connection. I was trying to double them up. Would not work. Now, I can finish the job putting it together. ( I was even going to have my brother- in law help me.)
Thank you this was very helpful. I got mine also at Walmart. I'm in Florida and in late April of 2022 it cost me $110.00 for one! Wish I grabbed it at that 50 dollar price. Live and learn I guess. 😆
OMG....I was so frustrated! The paper directions that came with the shelves were so inadequate. I spent hours trying to put the top and bottom together! Thanks for making this step by step video! You made it simple and it was put together in no time!
wow! 59.17$ each? now it runs about 140 each... this is a genius installation. i think normally, you would need a coupler to connect the two, but instead you connect both shelves directly.
FINALLY!!! If it had not been for your video, I might not have ever been able to assemble it. Even with your help, it wasn't easy. Actually, it was your video and CLAMPS that enabled me to succeed. I couldn't have done it without both. Why clamps? Well. despite many, many trips to my computer screen to see how you attached the top to the bottom, I COULD NOT DO IT. I NEEDED CLAMPS. Fortunately, I have have a large supply of them. That's what made the difference. Even so, if I had not seen you many times attach the top to the bottom, I might have given up. I might have thought that it was impossible. Fortunately, I had you to prove that it is not impossible. Thanks for salvaging the shelving unit from the trash can. Hey, wait a minute. After I finished, I started reading the comments, and I noticed--for the first time--the mention of "couplers." I then saw that I had assembled the shelves without using seven parts. I also noticed that you made no mention of them. What's going on? Well, I'll have to check that out...manana. The shelve are standing, and you didn't say anything at all about "couplers," so I'll investigate that matter tomorrow. I don't have enough energy left to do it today.
I bought two of these - 1 yesterday and 1 today. Since it was only $35, I had to get the other one for this price. The one I bought today didn't have the couplers, like this one. I got on live chat and got 4 sent to me. While I was waiting, I noticed that these had 2 different sets of directions. The one yesterday had 4 couplers and the one I got today had directions that stated to do what's in this video. I probably won't wait for the couplers, seeing this was intended this way. I just hope it's as sturdy.
Who would have thought that 6 years later you’d be saving me from my frustration with this video. Thank you!!!
Happy to help!
Exactly. Same here 😂😂 💯
The instructions that come with these shelves is shit for a beginner of doing things like this. You have saved a lot of people a lot of time. Thank you sir👍
7
Thanks heaps for this video, made life so much easier 😁
I just bought 1 from Home Depot for $158.00. Thank you for your video. You saved me so much time and frustration.
4 years later your video is still saving lives 🧡🧡🧡🧡 thank you brother
It's been 7 years since you uploaded. but still it's helpful. Thanks. Love from PORTUGAL.
dude, you're a lifesaver. I got the edsal brand 60in from Home Depot and the installation instructions I found online were terrible. couldn't figure out how to put the top and bottom beams together without it falling. your pull up and then hammer method worked flawlessly. I appreciate you. take care.
Thank you thank you. I spent 2 hours trying to get top and bottom together. Thanks to your video I got it all put together in 45 minutes.
Elizabeth Cook,
How's that again? Did it take you two hours or 45 minutes?
They say particle board shelves but look like MDF, Which?
City
Your instructions were spot on. So simply explained and especially the part where we connect the top and bottom you made it look so simple and if followed right they were not difficult. Great video and thanks so much for making our job easier 👏👏
Always happy to help!
Thanks for saving our marriage!
hahahahhahahahhahahahah... this made my morning smile
How you assembly horizontally
Oh my gosh! You made me bust out laughing!
Ours as well...3 hours later
Weww that's happened with me too
Thank you for this easy detailed instruction video cause if all I had was these instructions included in the box I'd be up the creek. So here it is 6 years later in 2023 & you've saved me Tons of frustration! Thank You! Thank You! Thank You! You're a Rock Star! 🤩👍
Happy to help!!
I need to take the time to personally thank you for this video. I cannot believe the awful instructions that came with the shelves.
As soon as my girlfriend and I started arguing, I thought about searching UA-cam. You saved our day. THANK YOU FOR POSTING THIS
Happy to help!
Thank you! I bought one of these and lost the instructions. This video was perfect, I had it put together in about a half an hour, no confusion, no mistakes, no wasted time trying to figure it out. Big help!
Saved my sanity.
The instructions on how to get the top and bottom halves to mate were, to be kind, obscure.
Watching you put this together gave me the information I needed to get this put together properly.
Edsal should be paying you!
My wife threw everything and walked away saying I am fed up and you do this alone ... then i came across this video ... thanks you are a super star and a marriage saver 🤣🤣
We purchased six of the MuscleRacks from Walmart (four 48x24, two 48x18). My wife and daughter did all the assembly. The biggest problem they encountered was caused by bent metal ends of shelf supports where the rivet heads are attached. The bend in the metal was hard to notice but a slight bend will give you fits as the pair of rivet heads won't socket correctly into the pair the keyholes they're intended to lock into. My advice is to closely examine the pieces before you begin the assembly. Straightening the ends of the supports is easy and it will make the job much less frustrating. Our purchase of six units included a total of 240 rivet-ends on the 120 shelf support pieces. Four or five ends had slight bends that needed straightening.
Thanks Buddy - I bought a couple of these. I opened the box and got everything out. Took a look at the instructions and thought "here's a go" anyway I decided to give it a crack. Needless to say I couldn't make out anything but once I looked at your video a couple of times, I was able to get my shelves together. I just have the top left hand short side which won't slide correctly into position - everything else is perfect - oh well - I'll just stick something light up there ! Thanks again 🙂
They are a bit of a pain. I do find it's easy to bend them back straight to have them better align!
Thank you!!! This was very helpful. My Home Depot delivery came with shredded instructions that I couldn’t see because it wasn’t packaged in plastic
Happy to help!
This is the only helpful video I’ve come across. Thank you. I couldn’t figure out what side the braces point. You’re the only one who explained that the flat side needs to point up.
Happy to help!
Thanks for saving my sanity...factory instructions were not well stated...but you my friend saved the day...Thank you!!!
This is the best of the shelf assembly videos I've seen so far. The key is setting the bottom edge of the top post on the top edge of the bottom edge as you tap the braces into the keyholes. The metal is thin (thinner than the old shelves that came with our house), so the top post may slip off as you pound down. Keep trying and it should work if the end isn't bent too badly. You might find that one rivet bottoms out before the other, but that is probably OK as long as it is within the narrow part of the keyhole.
Thank you for this. I just bought the biggest they have of this shelf and my dad is worried I won't have the tools to put it together. I plan to send him this video to prove to him it is easy to put together. Again, thank you. You will have put his mind at ease.
Thank you very much for the help putting my 2 shelves together. Same size as yours. Ordering 2 more tonight.
Glad I could help!
Thank God for you fellas on UA-cam. I really don't know what I'd do without you.
Still appreciate this video 6 years later. Thank you!
That's the power of UA-cam!
I needed to thank you soooo much for this video....I was putting up this same exact shelving last night and Omg I could not figure out the second part to save my life lol. I was beside myself I stopped 6 attempts to take a moment because I was ready to scream lol..I am a woman...lol Then it hit me....Holy crap you tube... And there was your video doing the same exact shelving..If I could send you flowers omg I would..lol You helped me bigtime ...Thank you a million times over....Your the best...!!!!!!
Always happy to help!
Thank you. Getting the top and bottom together was... well, a lot of swear words were involved with that process and my husband and I may have yelled a bit. Finally I came onto youtube to see if there was help and your video was a lot of help actually. I never dreamed something this simple looking could be so incredibly difficult. I've built a lot of furniture over the years and I think getting the top and bottom together was probably one of the hardest things I've done.
Barbara Ziblis,
I certainly agree with you. It's not easy.
I appreciate you, man. Getting the top half put on these things isn't exactly intuitive, and you did a great job clearing it up.
Thank you sooooo much! I had the beams facing outward and I couldn't figure out the correct way to place them from these handwritten instructions with bad pictures.. I am so grateful you took time to make this video :-)
man when you see the number of views you realize that the manufacturer has to do a better job! Thx, you saved me headaches
Happy to help!
Hallelujah!!! A man made a video showing how to assemble these shelves. I had to write Edsal Customer Service twice, before they shared this video. How difficult would it be for Edsal to show this video's 'address' or link on the 1 page of instructions, to assist the person putting the shelf together?? I mean REALLY!!!
I’ve been struggling for days trying to figure out how to assemble this shelf that was given to me. I bought couplers online as I thought it was necessary only to find out they’re the wrong size. No other videos I found showed this. Thank you!
Happy to help!
Mine came with couplings for attaching the vertical pieces together. A lot easier (and sturdier) than what you show. The Edsal model number was UR-245PBB (at Home Depot)
Thanks! I bought 4 sets of these at an estate sale. I had to disassemble them and there were no printed instructions. I tried reverse engineering how I took them down, but I hit a wall when it came to attaching the second tier of uprights. I had tapped the third set of crossbars into place, so there was no room to stack the uprights flush. Your instructions on this part saved me. Thanks again. Cheers!
February 2023 … thankful for this video!
Bought these used... no instructions... What a PITA.... Made it so much easier! Really appreciate you taking the time to video! Thank you!!!!!
Thank you for your video. Your video made it possible for my son and daughter to be able to finish setting up our storage unit
THANK YOU FOR YOUR VIDEO!!!! The included instructions in the box were of NO HELP. You saved me!!!!!!!
Happy to have been of service!
Thank you so much for this video! You’ve help me and my daughter put together this shelving unit in no time!
Thank you so much. Hammer helped to get them sturdy enough to add the second level. We finally got the couplers to work however as we didn't want a shelf right at the mid-level. Very helpful video.
Happy to help :)
Thank you so much for this. I was trying to overlap the extension pieces and having a hell of a time. You saved my day.
Happy to help!
Thanks for giving me the confidence to do it un-assisted. I am 64 and very happy to have accomplished it on my own. Paper instructions are never as good.
Thanks for the vid..my wife bought one of these years ago and I looked at it and took it apart and cussed the whole time putting it back together which took awhile and today after watching ur vid I bought another one and put it together in 10 mins..very easy.
Happy to help!
Thank you for sharing. I was having trouble assembling the top part that I had to turn to your video for help.
Had a muscle rack already, bought a second one. The new one fit together like the first, but the posts on the new one weren’t deep enough to fit like the first. I slashed my hand and then took a couple of days off from it! Thank you for the vid and the assistance!
Awesome. Thank you for showing us this shelf. I have an idea to convert one of these into multiple 4'x18"x2' reptile vivariums with space for storage and heat lamps.
So many crashing shelves. 😳 Thank goodness for people like you on UA-cam!
Thanks for doing this video - assembly much easier watching you than wrestling through written instructions
Glad it was helpful!
just built one of these at work! thanks so much, couldnt figure out how to connect the posts
Thank you so much! I struggled with this shelf for over an hour trying to figure out how to get the next level on there! Cursing, crying, and and in the fetal position on the ground
I'm happy to have helped :)
this company should be ASHAMED of how shitty their assembly instructions are written. Thank you for doing what a multimillion dollar company was unable to adequately explain. How these corporations get away with such bs is disgusting. You should get a commission from them for every view on here.
@@bdub1863 Hey, that might help me make more videos! Lol
uberDoward I still can’t get the second posts to attach, so decided to do two shelve ship side by side, and the side pieces still won’t stay attached and I’m wailing on it with a mallet. This product is absolute SHIT. I’d like to take my mallet to MuscleRack and find the POs who greenlighted this product and show them how hard I can swing.
Thank you for your video. The directions where non-existent and I had no idea how to do it. Your video was awesome and I had it put together in no time!
I just burst into tears trying to put one of these units together. I'm going to give it one more try.
You got this!!
@@uberDoward Thank you! It is in my home office now. You are a master doing it by yourself. My Mom and brother helped me hold pieces in place. Your video was a lifesaver. I am really happy with the finished product. Did you anchor your shelves to the wall?
@@justaphase I didn't anchor to the wall. I made sure they were level, and made sure to put heavy weight toward the wall.
Glad your video is still available. Bought more shelves and need a refresher course! Thank you!
Thank you! Bought some used and fought with the upper parts for quite a while trying to double them up before I found your video.😂
You are doing the Lord's work. You just saved me hours of frustration.
These are a PITA to put together but once they are assembled, they are pretty solid. I found the particle board was too weak for my needs so I had Lowes cut up some 4x8 melamine. Much stronger and makes a better product overall.
good tip to match up the sides for that little extra room. thanks.
Thanks! That was perfect, I feel totally prepared now. Thanks for taking the time!
Thanks mate! You changed my horrible night to a success!
Thanks for the clear and concise video. Saved me time and energy.
Happy to help!
Just took mine out of the box, took a look at the directions and then right to UA-cam! Thanks for making this video! Although I paid $84 for one on a Walmart black friday deal ugh. Thought I'd gotten a good bargain until now.
Happy to help!
Lifesaver. The instructions in the box made NO sense whatsoever. Thank you 🙌🏾
This video just saved me from tossing this rack 😂. Came here and found your video and finished putting it together in 15 minutes. Thank you!!
Thanks, I can’t install this with lousy instruction sheet I got in box. Walmart is giving 4 E couplers for extensions. I don’t think we need that and these e couplers make shelf unstable . I like your extension idea better
Good instructive video. Needed to know how two units are put together.
EDSAL...You BETTER PAY THIS MAN, and improve your directions. Thank you for saving me from having to return this product in the store.
You my friend are amazing! I was struggling with the second upright pieces.
LMB9888 struggling now. Lol hopefully this vid helps
Thanks, I have only put together the type that comes with couplers to attach the top to the bottom. This saved me from having to wait for Edsal to send couplers.
Thanks for doing this. I bought the same unit. It says something about floor fastener or wall fastener. I really can't put it into the wall, but I was curious about how to fasten it onto the floor. I am really terrible at being a handyman, but I am very appreciate of you doing this and putting it on a video so I can do it.
Glad I could help!
It's almost 1am and I couldn't figure out how to start the next set of shelves. Thank you brother.
I ended up just squeezing the tops into the bottom rack. It may be a little unstable but it holds pretty well, especially when I'm using the shelves for medium-light weight storage.
Thank you so much.. You were so helpful for this 66 yo Grammy !!! 🙂
Happy to help!
GREAT VIDEO! I could not figure out how to join the top with the bottom. They are easy to assemble and great shelves, I am using them for food storage.
Thank you so much for posting this! I actually found them too heavy for me to buy by myself and bring home so I got a buddy to help me
This is a great idea over the other versions of floating shelves. Thanks for an in depth video. 5:34
My experience assembling solo taught me that putting the top half on works better if I snug all 4 corners up on the lower half and then just loosen the corner I am working on. Secure it and then move on to a different corner. Adding the next higher beam and brace as I go. Seems to prevent knocking opposite corner off while hammering. My assessment is it may be easier with 2 people but could destroy the relationship so better to go at it solo! (but nbd because the box says it assembles easily in minutes!😏)
Thanks so much for this video, nearly gave up, stupid company I ordered from did not include any instructions. Lifesavet😊
Always happy to help!
Good job man i having a hardtime to assemble but when I click your channel its awesome I easily assembled our steel shelves. Thanks
Thanks for posting. I'm all thumbs and dyslexic to boot, so this video really saved the day for me.
Thank you for this video. I was having a hard time with the installation of second self.
I’ve seen all the videos for this shelf and this is the best video. I just ordered this from Walmart cause I have a few mid size and not to heavy yard tools I want to put on this. I know the shelf is cheap cause it’s a Walmart product but as long as it can hold a
Weed wacker
Two leaf blowers
Tools
Gas can and others light things then for $50 I call it a win/win .. the only problem I see is the cheap board Just don’t store heavy weight on 3rd or 4th shelf and all should be fine and definitely no liquid spills on these boards. Great video man
Wow - your video made it much easier than I thought. The directions that came with the shelves were terrible! Thanks!
Bloody legend mate. Helped heaps!
Thanks a lot! I can buy it now knowing that I can install it easily
THANK YOU!!! No directions in box, was looking at parts like a deer at headlights:( After watching your video, I was done in 20 minutes:)
WOW, your directions were perfect! We had it put together easily in about 20 minutes. Thank you so much for your easy to follow instructions.
No problem! Happy to help :)
Thank you for the video. I was really getting frustrated on getting the second riser attached. I wasn't dividing the rivets for the connection. I was trying to double them up. Would not work. Now, I can finish the job putting it together. ( I was even going to have my brother- in law help me.)
You gave us a way to prevent a real big fight...thank you!
Thanks! Was having trouble joining the two halves.
Reorganizing my garage during corona, thank you for the easy instruction!
Excellent demo. Am about to assemble some right now. Thank you!!
Dude! Like an idiot I was lapping the upper with the lower and could not fit the pins through both slots! Thanks man!
Thank you this was very helpful. I got mine also at Walmart. I'm in Florida and in late April of 2022 it cost me $110.00 for one! Wish I grabbed it at that 50 dollar price. Live and learn I guess. 😆
Everything has gotten crazy!
thanks was getting really mad trying to figure out how to add second set of legs seemed really unstable but it worked after watching you !!
OMG....I was so frustrated! The paper directions that came with the shelves were so inadequate. I spent hours trying to put the top and bottom together! Thanks for making this step by step video! You made it simple and it was put together in no time!
wow! 59.17$ each? now it runs about 140 each...
this is a genius installation. i think normally, you would need a coupler to connect the two, but instead you connect both shelves directly.
FINALLY!!! If it had not been for your video, I might not have ever been able to assemble it. Even with your help, it wasn't easy. Actually, it was your video and CLAMPS that enabled me to succeed. I couldn't have done it without both.
Why clamps? Well. despite many, many trips to my computer screen to see how you attached the top to the bottom, I COULD NOT DO IT. I NEEDED CLAMPS. Fortunately, I have have a large supply of them. That's what made the difference. Even so, if I had not seen you many times attach the top to the bottom, I might have given up. I might have thought that it was impossible. Fortunately, I had you to prove that it is not impossible. Thanks for salvaging the shelving unit from the trash can.
Hey, wait a minute. After I finished, I started reading the comments, and I noticed--for the first time--the mention of "couplers." I then saw that I had assembled the shelves without using seven parts. I also noticed that you made no mention of them. What's going on? Well, I'll have to check that out...manana. The shelve are standing, and you didn't say anything at all about "couplers," so I'll investigate that matter tomorrow. I don't have enough energy left to do it today.
Just received 3 of this shelves for free at work, hoping will last a long time like yours.
Thank you for the video. It helped me assemble the rack since the box didn’t have instructions.
Thank you! I got stuck on the second set of posts
You're welcome!
Adding the top section can be a pain in the neck.........until I watched this video. Well done!
Happy to help :)
I bought two of these - 1 yesterday and 1 today. Since it was only $35, I had to get the other one for this price. The one I bought today didn't have the couplers, like this one. I got on live chat and got 4 sent to me. While I was waiting, I noticed that these had 2 different sets of directions. The one yesterday had 4 couplers and the one I got today had directions that stated to do what's in this video. I probably won't wait for the couplers, seeing this was intended this way. I just hope it's as sturdy.