Kudos to you Max! Everyone in the Chia community benefited so much because of your willingness to make it open source. Words simply cannot express our gratitude!
Thank you Max. Your contribution was impressive and very beneficial for this community and also helped the environment because it saves a lot of wear in expensive nvme drives. I’ll share with you and with Alex part of my first chia proceeds, if that ever happens! You really helped me get into this chia ecosystem with your knowledge and generosity! Million thanks to you both!
This company, a robotic company that employs Max, should really think about a raise for him. There are rarely such talented people who prefer to work for someone than for themselves.
Thanks for this interview and for MADMAX plotter. I have Intel P3700 pcie 400 GB. MadMax boosted plotting speed to 1.5 hours per plot on i7 3770 with 256 buckets.
Completely agree with you! Surely he is genius and on top of that he is also a great guy that is contributing with the community sharing his knowledge! We all need to support him in different ways! Thanks Max!!
So gpu plotting is a reality ! Same thing happen to burst back in the day. Someone made TURBOplotter that was using the gpu and ssd insted of cpu but the burst plots were somewhat at the speeds that a normal plotting on cpu will do on chia ...so burst plots were slower. In any case based on that experience (2018) FOR SURE a gpu plotter will be a reality. Now I really like this mad max plotter and I think this is just the begining. If I were in chia management I would hire this guy or at least give him an offer to work with the team.
Ye big thanks to Max. My 5900x was doing a respectable 36 plots a day before using Swar/Default Plotter. I'm now doing 55+ after pushing the overclock as far as I can. Absolutely insane uplift!
@@TheSKeFi my absolute fastest plot so far is 1486.18s (24.8mins). I've dialled in my overclock to where im thermally limited at this point, even with a 360mm rad, given summer has finally decided to show up here in the UK. I have my 5900x at 4700mhz effective all core 1312mV, using CTR 2.1 to tune it. RAM is at 4066mhz 16 20 20 38 1450mV. CPU usually sits 83-85C in phase 1, small peak to 87C. Furthest I could push it and what i got my best time with was 4715mhz 1312mV, but at peak it goes to 89C. At 90C I'd hit thermal limit and clocks would pull back significantly. EDIT: Spelling
Guys, support max sending him coins, there are few wallet addresses which you can use to do it on madmax plotter on github. As mentioned at the end, I have no doubt he could have made lots of money by selling the solution for big players which would make it even harder for regular ones. So, support hi.!
Alex: Great interview! (By the way I am already plotting with Mad Max version V05 and it is faster! Plots between 28 and 31 minutes with 110GB RAMDISK) Max: YOU ROCK!!! 😎⚡ Danke schoen aus Mexiko!!!
Madmax is definitely a bad ass! I was wondering if i were competing against him to release a GPU miner back in 2014.. i've forgot which coin i was working on, i just remember someone beats me to it then i just gave up working on the GPU miner and uses the one that got released first.
Did Max publish his public chia wallet address somewhere? It would be a grateful act for us to donate. This will also entice him to improve on it and hopefully make it byte for byte or even faster.
Amazing that Max wrote a 6~10X faster plotter than Chia in about 1~2 weeks of his spare time, and he didn't need to receive $60M in VC funding or need to do a 98% premine. It really puts things in perspective. Yes, he's extremely talented and skilled. But the tokenomics are non-existent.
i won with madmax today with 1000 plot ( 1st win for me ) 06/17/2021, 07:30:55 AM 🌱 Farmer reward *********************** 1.75 XCH $729.28 ******** Unspent 06/17/2021, 07:30:55 AM 🌱 Farmer reward *********************** 0.25 XCH $104.18 ******** Unspent
Working on it! She is so busy ever since her first debut -- so many commercial and movie opportunities... she barely has time for me anymore between all of the dog bones and dog modeling :(
hello any body had a problem with mad max?? for me when it finish a plot it creat a plot in this format (...........plot.temp) when i delete the temp word it get fixd but the hpool gui find it as a invalid plot can any body help ??
Sorry, don't know how else to get ahold of you. You always hyped up PNY Quadro P2000 for 25+ transcoding and such. Mines been great for like 4 years but now having issues. Hard to find an actual new one these days. What would be another good card with similar abilities?? TIA!
Good interview. I kind reminder that interview is the opportunity to hear the other person, if you could reduce the “I can relate” stories and maybe keep them for separate solo videos - it would maximize the time we could hear Max.
And then everyone realised it was not actually a very good idea to start with...common guys there are way better blockchains out there that are actually green.
Your wasting your time and your money on hard drives. Your better off building a couple of cheap gaming computers and mining crypto on nice hash or something because it will pay off fast.
Kudos to you Max! Everyone in the Chia community benefited so much because of your willingness to make it open source. Words simply cannot express our gratitude!
Max... you're the MAN !!!
w00t I really enjoyed talking to him -- he is a cool guy.
@@SlothTechTV you forgot to tell him to add other plot size option to the plotter
Max, thanks for your tremendous contribution to the Chia world, and you as well Sloth Tech TV!
Thank you Max. Your contribution was impressive and very beneficial for this community and also helped the environment because it saves a lot of wear in expensive nvme drives.
I’ll share with you and with Alex part of my first chia proceeds, if that ever happens! You really helped me get into this chia ecosystem with your knowledge and generosity!
Million thanks to you both!
Max is my hero! Original plotter was a nightmare. Open source is freedom!
Max, you deserve the Nobel Prize thanks !!
This company, a robotic company that employs Max, should really think about a raise for him. There are rarely such talented people who prefer to work for someone than for themselves.
Thanks for this interview and for MADMAX plotter. I have Intel P3700 pcie 400 GB. MadMax boosted plotting speed to 1.5 hours per plot on i7 3770 with 256 buckets.
I couldn't be happier to see the man who made the piece. thanks both
Completely agree with you! Surely he is genius and on top of that he is also a great guy that is contributing with the community sharing his knowledge! We all need to support him in different ways! Thanks Max!!
totally! ty for commenting :)
Awesome Alex!! Thank you so much for this. I'm really surprised how short was the time he made his plotter. Amazing developer 👏👏👏
Some people are at another level. Max is one of them. Kudos.
Max... you're my hero.
Props to mad max! Very humble and great guy. Thank you guys both for doing this interview!!
Thank you maaaax ,thank you mister to give us the opportunity to thank max even with words through your channel 🤗
Thanks for the interview! Great content!! That’s the kind of video you watch and expect that doesn’t finish…
So gpu plotting is a reality ! Same thing happen to burst back in the day. Someone made TURBOplotter that was using the gpu and ssd insted of cpu but the burst plots were somewhat at the speeds that a normal plotting on cpu will do on chia ...so burst plots were slower. In any case based on that experience (2018) FOR SURE a gpu plotter will be a reality. Now I really like this mad max plotter and I think this is just the begining. If I were in chia management I would hire this guy or at least give him an offer to work with the team.
Ye big thanks to Max. My 5900x was doing a respectable 36 plots a day before using Swar/Default Plotter.
I'm now doing 55+ after pushing the overclock as far as I can. Absolutely insane uplift!
w0000t ty for sharing your experience! :)
Man what is the rest of your configuration, and did you push it to 4.7Ghz or even more? :D
@@TheSKeFi my absolute fastest plot so far is 1486.18s (24.8mins). I've dialled in my overclock to where im thermally limited at this point, even with a 360mm rad, given summer has finally decided to show up here in the UK.
I have my 5900x at 4700mhz effective all core 1312mV, using CTR 2.1 to tune it. RAM is at 4066mhz 16 20 20 38 1450mV. CPU usually sits 83-85C in phase 1, small peak to 87C. Furthest I could push it and what i got my best time with was 4715mhz 1312mV, but at peak it goes to 89C. At 90C I'd hit thermal limit and clocks would pull back significantly.
EDIT: Spelling
@@SlothTechTV thanks for bringing it to our attention ^^
Well done Max keep it up especially if you can integrate into GPU that'd be great
absolutly excellent interview. Maybe the rumor mill can quiet down a bit now?
Holy smokes! Good stuff as always. Definitely some more conversation would be great.
For anyone that's interested, if you have 64Gb RAM on your rig you can save around 48% NVMe wear whilst using a combination MADMAX and PrimoCache:
Great to see interview with Max!
Thanks Alex and Max, great interview
fantasitc interview! big up to the both of you! thanksssss
Guys, support max sending him coins, there are few wallet addresses which you can use to do it on madmax plotter on github. As mentioned at the end, I have no doubt he could have made lots of money by selling the solution for big players which would make it even harder for regular ones. So, support hi.!
Thank you Alex and Max for this interview… And Max, that was awesome job from your side! And even more awesome because you open sourced it. WOW!
Great interview, thank you both! Cheers!
Really glad to have guys like Alex and Max on the Chia team!
Awesome contribution to the chia universe!
Thank you for the support, Sir! Coming from you this means a lot :)
Damn Sloth you aren't messing around! Awesome guest!
U broke the matrix :p. Love the software went from doing 6 a day to 18 plots
Max / Alex thanks for the interview…. Max you’re the man!
Alex is a great interviewer! Thank you for the video!
Well done, Max. Technology love from DK. ;-)
And Thanks to you, Alex for bring this interview. I have followed you since you start your Channel. Learned a lot. Thanks Once again. :)
Love the interview, thank's buddy.
OMG! What a treat this is. MadMax plotter is the bomb!
An a monument to this guy!! Game changer🤘🏻
Just setup your madmax for re-plot to pools, thank you Max, it's amazing. And great Intervju
Alex: Great interview! (By the way I am already plotting with Mad Max version V05 and it is faster! Plots between 28 and 31 minutes with 110GB RAMDISK)
Max: YOU ROCK!!! 😎⚡ Danke schoen aus Mexiko!!!
Thanks Max and great interview. Much appreciated.
When a Legend meets another Legend.
Max did a great job! Badass =)
Amazing. Thanks for making it open source!
It is very fascinating to watch this video at the beginning of 2023 and how the story went on. To be continued...
thank you Max you are a hero
Awesome Plotter Max👍👍👍
Max if you read this - thanks! u are brilliant keep doing what you are doing...
Max Saved me a ton of days and made my gamer life so more easy. I am very grateful!!!
Are you still Chia farming??? I have not seen anything new in a very long time from you...
Thankyou both
Awesome interview! Max is a legend
Max and Alex... thanks both!!
Max's Chia's the Man! :))
Not all heroes wear capes
Amen
Mithytic! Congrats Man!
Madmax is definitely a bad ass!
I was wondering if i were competing against him to release a GPU miner back in 2014.. i've forgot which coin i was working on, i just remember someone beats me to it then i just gave up working on the GPU miner and uses the one that got released first.
Amazing plotter, kindly include multiple destination drives support for final plots.
If your destination drives are in Linux, you can try mergerfs
what a badass
this guy Max is legit AF
I am amazed to see max. Nice video.
Thank you :)
Did Max publish his public chia wallet address somewhere? It would be a grateful act for us to donate. This will also entice him to improve on it and hopefully make it byte for byte or even faster.
WOW Man iLove
Amazing that Max wrote a 6~10X faster plotter than Chia in about 1~2 weeks of his spare time, and he didn't need to receive $60M in VC funding or need to do a 98% premine. It really puts things in perspective. Yes, he's extremely talented and skilled. But the tokenomics are non-existent.
Awesome!!
Awesome work with the plotter
Awesome guy.
Much luck Max!
WE LOVE YOU MAX!!! please update!!!
Miss you content, hope all is well with you and your family. ❤
You guys are so COOOOOL , Both of you~~~
Oh great another thing in chia GUI saying something is good is actually not checking anything.
Which plot checker is recommended then?
ALEX : your audio is a little low but Max is good.
haha i know.... ugh...
great Interview
Mad Max Creato!!! A Legend!!!
MadMax, when will you make a new version with K35 and puzzlehash support?
Hey Alex, would it be possible to farm Chia from a GPU mining rig running Hive Os?
Damn, people are smart
Any news on chia legal pools?
I ran madmax but it's even slower than GUI. Help? Running i7-10700, 32gb ram, 512 GB NVME, 1tb hdd, using 16 threads and default buckets at 256
i won with madmax today with 1000 plot ( 1st win for me )
06/17/2021, 07:30:55 AM 🌱 Farmer reward *********************** 1.75 XCH $729.28 ******** Unspent
06/17/2021, 07:30:55 AM 🌱 Farmer reward *********************** 0.25 XCH $104.18 ******** Unspent
for how long you been plotting?
@@mokacat1595 45day
Again....Alex your YT channel needs 10x more views....
(Let you dog back again on the videos!😁)
(Slim here ...💪)
Working on it! She is so busy ever since her first debut -- so many commercial and movie opportunities... she barely has time for me anymore between all of the dog bones and dog modeling :(
Nice 👍
Come on man, we need to get some lower 3rd's flying in with names and who they are.. Little After Effects goes a long way.
Why don't you post anymore brotha?
Saludos Max.
hello any body had a problem with mad max??
for me when it finish a plot it creat a plot in this format (...........plot.temp) when i delete the temp word it get fixd but the hpool gui find it as a invalid plot can any body help ??
Sorry, don't know how else to get ahold of you. You always hyped up PNY Quadro P2000 for 25+ transcoding and such. Mines been great for like 4 years but now having issues. Hard to find an actual new one these days. What would be another good card with similar abilities?? TIA!
max, follow the white rabbit
He is just a genius, he proved how immature the Chia team/company is. I don’t see the future and the technology of chia going anywhere.
God, you joined YT in 2020.. you are a kid
Why arent you making any videos lately
Chia plummeted 98%. Probably sold all equipment and took a heavy loss.
way tooooo short, could have listened way longer
i love it. ty for the comment maybe he will be open to a longer more technical interview in the future :)
i hate you madmax because we cant sell ssd anymore :))) just kidding :) you the man max and alex
dual xeon tmp2 to ram 30 minutes lol
Good interview. I kind reminder that interview is the opportunity to hear the other person, if you could reduce the “I can relate” stories and maybe keep them for separate solo videos - it would maximize the time we could hear Max.
I guess the channel is dead now?
And then everyone realised it was not actually a very good idea to start with...common guys there are way better blockchains out there that are actually green.
Your wasting your time and your money on hard drives. Your better off building a couple of cheap gaming computers and mining crypto on nice hash or something because it will pay off fast.
Chia is already dead and here is the gravedigger
Lol.. how.. this is making it more efficient.
@@imperator_odin More efficient to make the network growing faster, the difficulty is going up and chia rigs are less profitable. 😀
this is an arm race
you slow,you lose