Milwaukee M18 FUEL PACKOUT Wet/Dry Vacuum ARE THEY KIDDING!?
Вставка
- Опубліковано 5 лют 2025
- Milwaukee M18 FUEL PACKOUT Wet/Dry Vacuum ARE THEY KIDDING!? In this video we show the #verycoolgang a brand new wet/dry 2.5 gallon vacuum from Milwaukee tools that is PACKOUT compatible and is super impressive! The specifications on this new wet-dry vacuum are very accurate which is not always the case for Milwaukee tools when they make outrageous claims for their new tools. Are they kidding us with how powerful and useful this new M18 FUEL PACKOUT Wet/Dry 2.5 gallon vacuum is? Not at all this new vacuum is the real deal and if you are invested into the PACKOUT lineup already we highly recommend you add this new wet/dry vacuum to your collection. Let us know your thoughts and experiences with this new PACKOUT wet dry vacuum in the comments section below!
#PACKOUT #MilwaukeeTools #NewTools
Merch Store : vcgconstruction.com/store
Low voltage service tech here. I use all half stack pieces for my carry in kit and use the compact dollyto wheel it in. The vacuum is sandwiched between an organizer and a tool tote, it works out great!
“We’re gonna test that out”
Thought I was watching Project Farm for a second! haha
You can attach the hose to the exhaust port for a couple of reasons. The first reason is to use it like a blower if you wanted to blow dust etc. The second reason which is the reason I use the old vacuum for is as an inflator. I use it to blow up the kids pool in the summer. Very fast and portable, and certainly beats huffing and puffing...
I Also, I like to use two hoses, one to suck, and one out the window of a work area, then you can use no filter, get more suction, and the exhaust fine dust goes out the window, instead of into the air...
@@Synic08 keep in mind that the filter also protects the motor so I'd still use a filter even if you exhaust outside. Also depending on the hose setup you might lose more suction than using a filter. Not necessarily a bad idea just understand the impacts...
@@Synic08 there are air outside of the window too you know.
This may seem like a dumb question but is there some sort of cap that you put over the exhaust when sucking through the hose to create more powerful suction or would that just make it worse?
Mufflers make it quieter at the expense of suction
Yeah I watched your video then ran to Home Depot and scored the three piece packout set thanks for the heads up
Nice little cordless vacuum-I am a vacuum collector-may have to add this to my collection.The "47" in reference is how high the vacuum can lift a column of water in a manometer guage-device for measured low inlet and output air pressure of a device.Manometers use two main reference-water column and mercury.(Hg)Also the measurements with manometers used in pipe organs.I would use the bags in this unit as much as possible-again to save your filter and motor.The bags are NOT meant to be reused-they are disposable.If you try to reuse-guess in an emeregency-the bag pores will be somewhat clogged and may not let enough air thru to cool the motor.Does Milwaukee sell a resuable cloth bag for this machine-That would be nice for folks like in shops and such with a lot of stuff to pick up like sawdust and shaving.
Lmao was just about to comment this. HVAC guy?
@vcgconstruction, what's up Vince. Hey thanks for the deals and yes I scored 3 of those packout deals, 1 for me, 1for my wife and 1 for my brother in law, and I scored the packvac with started kit deal.
Thanks again
This vac is great for dusting up my hvac return vents while changing filters. Easy to carry this one handed up the ladder and then using other hand on the hose. Got the brushed tip accessory. Perfect.
Glad they increased the size to a 2.5 gal & redid the hose inlet/outlet in the new packout version shop vac (gen 3).
Don’t think it’s intended to replace the gold standard of shop vacs (Ridgid big boy, imo) for large jobs etc.... BUT for its size, being battery, & fitting into the packout system w/ other packout boxes. I think it will make a good compliment to your main corded shop vac, as another key feature it has; is getting into restricted spaces where a corded big boy can be frustrating (tight laundry rooms, & getting behind a washer/dryer, for instance 😳).
Thx Vince & VCG for the vid✌🏼
Yes i scored Milwaukee pack out for 109$ in Portland Oregon.I showed them your receipt ,they didn’t want to do it but there was Milwaukee rep and she said she will make an Exception👍
I use my PACKOUT vacuum for service calls for clean-up and i use it with my M12 3-in cutt-off tool attachment for when i make cuts into terracotta and plaster lathe walls. The customers love the that its really quiet and that they can still work from home without interruption. Great vacuum.
Do you cut dry wall with it I’ve been thinking of getting it I work in the water and fire remediation industry
@@El_Escobar612 yes. I recommend the dust collector nozzle if you are making vertical cuts and if you are making cuts into a ceiling, have a extra length hose with coupling for the extended reach.
Does your m12 3 in cut off tool work good to cut drywall, that what I was asking? Thank you for your help 💯
@@El_Escobar612 Yes it does.
The true reason this vacuum is better than Any other is its stackable, this gets my truck vacuum off my shelfs and off my truck ground floor. I cant tell you how many vacuums I ruined over the years because the hose gets crushed or it was just in my way in the truck and got tossed. I bought the packout mounting plate and this vacuum stays stacked on my truck with 6 other packout boxes of special tools that don't need to be on every jobsite. I have a second stack of 6 boxes of tools and materials I use on every jobsite on the wheeled dolly bottom box that i keep bungee Corded in. This vacuum is exactly what I needed
One more for the collection Milwaukee it’s the way to go thanks V....
Yes I've got the old vac.....and thanks to you Vince,I will be getting this.....I was on the fence......😆
Yes I scored the 3 piece Milwaukee packout deal, I will be keeping my eye on the new Milwaukee Fuel Packout Vac thanks again Vince👍🏼
What was that deal? What's ya get
I heard about the packout glitch but I really didn't need anymore packout. I still should have bought it. I really hope Santa brings me the vacuum! Thanks for the test Vince.
These packouts are awesome, l hate to bring up the past but l will, we would carry a wooden tool box and it was heavy and filled with sawdust and you eventually cut through the handle cutting on it.
I have to get the bottom piece, l have to, l have no choice. Thanks Mr. Vince.
LOVE YOUR VIDEOS, i watch them on my runs!! I just bought the dewalt 10 inch 713 single bevel chop saw would love a review video on that
Milwaukee always does this so I waited for the wet/dry vac redesign. I have the one with the hose that stores inside. And they are here with another one. I don't need another one of these small vacs but for the portability with packout I want one.....lol
I went out and bought it because of this video. I use it more then my corded one in my shop just because it’s so cool! Love it! On low it lasts awhile and still does a great job. I use high in short bursts if I really really need it but most time it’s on low. Thanks for the review VCG!
My current vac rarely clogs, has great power after years of heavy use
I absolutely love my m18 vac
I purchased the M12 fuel vacuum after watching videos and reading many articles about how many people are having issues with it shutting down and over heating I returned it and purchased the M18 Packout vacuum. I really loved the size of the M12 vacuum but the fact the battery life is so short I didn't want to use it and have it break down on me and then have to return it. I am definitely happy with the new M18 Packout vacuum. So awesome that I can hook it up to all my other Packout cases. There is definitely a huge price difference trust me it's worth it.
Got the three price the day before the glitch, kicked myself for that one, got plans on the vacuum the near future, just found you yesterday, doing a good job keep it up!!
I didn’t score on the pack deal but I did get a good deal at HD. 2 6hour batteries 🔋 with rapid 18v/12v charger for $299 and it came with a free tool. And yes I chose the Milwaukee 18v fuel vacuum. A 200 dollar value.
I love VCG reviews because Vince is a straight up guy. This review was informative, but what i think we all want to know, is how does it compare to the 0880-20 version 2
Sound Intensity doubles every 3 decibels, so the New Packout Vac is a considerable improvement. I hope to score one this season of deals. Waiting patiently...
10 db is twice as loud. 3 db is twice when talking about power.
@@RAREFORMDESIGNS Good catch ;)
I think that the packout deal was once in a lifetime I remember I was doing yard work when I started looking at your video telling us that it might work but then it might not, obviously with plenty of doubt and too good to be truth I took off to home Depot I was able to score two of them for the total price of $236,. After reading all the messages all over the country of many people getting that deal all I can say is thank you for the heads up.
Can I change my speakers out on my m18 radio /charger is the pack out radio worth the money are the speakers going to blow . I heard the it’s loaded with speakers and sounds awesome. Is this teue
Got this thing a love it. Still need the big corded ones but the little one works great for 90% of jobs
Have they sorted out the circuit board issue that they had with previous m18 model where it stops sending power to motor?
Vince, the 180degree bend on top is second distance of about 15inches in back pressure, or loss in suction
Sorry Vince. I’m a Dewalt guy through and through. Have the Dewalt 20 wet dry vac. Love it. Great vid as always!
This channel is kinda growing on me...
Let’s see a level shootout.... please include Kapro... they seem well made, Israel brand, that doesn’t get as much attention as they deserve...
Can you buy a longer hose for this or a extension to add on
They really should make the roller cart a vac. Makes sense with it being at the bottom of any given stack. Could add a drain for fluids. Make a dust separator box that can be attached the next layer up.
Question, If you use the vacuum, then use the blower will the contents come out with the air?
Almost had the deal yesterday (11/10/20) store did not have any of the bases. All of the signage was there. Went back today there were plenty bases. Got the $179 deal also added another box and got a discount on it as well.
I wish there was some onboard storage for the tool dust collection adapter. With a battery in it, you’re left with one accessory that must stay off the hose and out of the storage chamber. Drains the batteries quite quick also. Overall quite good though.
91db is a bit loud imo, but I usually wear ear defenders anyway when using powertools. Look forward to future models! A Hepa 14 rather than Hepa 13 would be good too!
Not sure if you were joking about a muffler but it doubles as a blower when you hook the hose up to it
i need one to attached to my grinder when cutting whiterock. My question is can I get a longer hose?
I have been looking at getting this packout vac , but because I have the gen 1 I haven't broke down to get this one. But I think I'm going to buy the packout vac to go with all my other packout boxes.
I have a muffler on my big ridgid vac is super quiet, only downside is huge. Need to get a portable vac like this one, my options are ryobi or milwaukee might go for this new one.
@@henryk1031 might go for that one if I get a good deal on it.
As a service plumber this has been an invaluable tool I’ll never go back to corded
What filter did you use for the water test, I didn't think you could use the supplied Hepa filter and needed the sponge filter which is not supplied or even out in Australia.
I want to know what the adapter is for. I’m knew to the cordless vac game but just got this
Also i just got the miluakee packout backpack, and its the best thing I've bought in awhile
Why havnt you gotten your hands on the packout light yet? Can't find video covering that from this chanel
I just bought this vacuum. I have an automatic switcher that I like to hook up my mitre saw and table saw too so that when I start up my saws, my vacuums that I have hooked up to the saws start up with it….but this vacuum is battery powered. Do they sell a cord adapter for the packout vacuum so I can still use the vacuum
On an automatic switcher??? I can’t find anything online about a cord adapter I can plug into the battery port
Can I use the old vacuum hose in replacement Woth this ?
I scored the glitch deal and made everyone jealous because they all paid 250+ for theirs. Thank you for always sharing the best deals.
We need to test the air tip conduit line puller! That's what I wanna use this vac for. Need to no what it will do in the real world!
I tried to score the deal and was unsuccessful. Oh well better luck next time. Thanks for the info so I could at least try.
I had picked up the M12 vac …. For size convenience…. Fully charged 3.0 AH battery 5 times drained in about 5 minutes of use.
Did you test the longevity claims of the M12?
Love your videos
might have to add this to my setup so I can retire my ridgid shop vac to the garage
As a painter, I don't really need ALL the packout stuff(still want it all, why? I love tools) but this would be great alternative to loading and carrying my rigid vacs, especially on smaller jobs. Larger vacs can get in the way in smaller houses and in the truck.
Personally, I only got it because it was in a cube shape. Fits in my car and uses less space.
Anyone know what the small black thread adaptor is for? Love the vacuum thou. Definitely quieter
Got the packout set for $129 after some convincing! You guys are awesome, thank you for looking out for us!
I talked them down on just the cart.. turns out HD employs can discount up to $50 without manager approval ..
Would love to see a mother saw on the packout work top with the vacuum beneath it in the stack and attached to the saw.
Thinking of getting this to keep my semi clean well on the road lol should do the trick
What is the weight like? Could you clip it to bottom off backpack if it’s not to heavy be ideal doing my a/c service
Today is January 27th 2021. My question is I purchased the Milwaukee fuel 2.5 gallon wet dry vac from Home Depot with 5 year extended warranty. I actually used it on a job and its suction is awesome but the attachments are lackluster. What's the diameter size for the vacuum fittings so that I can purchase better set of vacuum attachments?
Hi Vince. I know the attraction to this is that it’s packout compatible. But I would really like to see it compared to the Bosch GAS 18V.
I have both. The Packout vac stays in my van now rather than the Bosch because it’s easier to keep in place. The Bosch is such a weird shape that it’s hard to find a good place to put it other than the floor. Couple of comparisons, the Packout does not have any extension tubes, which I used regularly with the Bosch. The Bosch however does not have a blower outlet, so it is a vac only. The Bosch has become more of a dust collector for me, as I can plug the hose for it directly into my Bosch miter saw port, and hang it off the back of my miter saw stand. The Packout is my every day grab and go vac.
I just got the new gen 4 drill and driver for Christmas now I'm going to get the packout rolling tool box then I will get the new m18 vacuum I did order the m18 high output 6.0 battery for the vacuum once I get it I also have the 100 piece shockwave packout bit kit all of this is for helping my mom and handyman around the house my handyman is fixing some things and I'm trying to help him I know a little bit about how to use my tools he is teaching me some stuff so that works out so I can help my mom out with stuff when he is not here
How’s the performance compared to the non packout vac ?
As soon as I saw your video I packed the kids in the Jeep and ran out to HD and luckily was able to score the packout before the glitch was fixed. Good looking out!
Could the readings be off on the corded because it was on the floor and there for further from the decibel reader
Great work guys , I say m18 fuel vac vs m12 fuel vac. I have the RIDGID 3 Gal. 18-Volt Cordless Handheld Wet/Dry Shop Vacuum and it’s great
Thanks again, got me a pack out system the other day, been needed one since last year but missed out on those deals and was just lookin at em the day before, very, very cool!!!
My vac will be here this week. Can’t wait. Really want to see the packout hand cart the Milwaukee rep was telling me about the other day
Let us know what you think once you get it cuz!! 👍🏻
@@VCGConstruction delivered today my man. It’ll be on the job site Monday
The hose makes a 90 degree turn where it’s attached to the base, just like the last model. It WILL clog extremely easy, just like the last model. I like the vacuum, but that’s a design flaw.
4r44r
@@thomasdickson35 I would imagine repositioning the motor to have the inlet/outlet hoses to go horizontal (centered) would be better to prevent clogs
I’ve been using this vacuum for about 9months with no issues. I don’t think it’s as flawed as you’re saying but I could be wrong. I’m a plumber in case you were wondering what I use it for
@@thomasdickson35 instead of 90 degrees south just put it straight into the fuel brushless it just has to be a slot to hold it
My ridgid which goes straight into the can clogs way more than either parkout, gen 2 or fuel
Not sure if you already have a video for this but I’d like to see a headlamp test. Test various brands of headlamps from the cheap $5 ones to the expensive $200 ones. What are the pros and cons of each, are they waterproof or water resistant, battery systems (Ex. rechargeable or does it take double a batteries), what are the various modes on the headlamp. Is it one setting or is there a high, low, flashing light, green light, flashing red, etc. You can even do a torture test to see the durability of each headlamp.
Dang that is a sweet machine! Thanks for the review.
Does it make a difference in what battery you use with the m-18 pack out vacuum?
Very interesting......but I would have liked it if they would have the option to be able to plug it in if you ran out of battery power. Cause I'm sure I'm not the only one that has ran out of battery at the end of day and still need to finish cleaning.
I use mine everyday and never have issues with it whatsoever. Great vacuum
I should say I use it in the plumbing world as well
Good to know, thanks!
would like to see a comparison of miter saws,milwaukee,and makita 12 inch . the makita with aws
Hi I just picked up the pack out vacuum and I’m liking it so far
My Milwaukee pack out 2.5 shop vac keeps randomly shutting off that I bought at Home Depot. I want to exchange it for another one but no one has it in stock. I don’t want to send it back because I still need it for work even if it works 50% of the time. Any suggestions?
why would you keep it sealed against bottom? Should have edited that part out haha but good vid i always put my hand on end of hose when sucking water every 20 sec or so to clear hose and then dip back in. Sick vac
That lock and unlock on the exhaust port is to use the blower function
Wrote comment before he explained it himself
Correct me if I'm wrong but I think the inches of vacuum rating is another power rating not the length of tube it will suck water through. I'm getting this vacuum soon. Home depote currently has a deal where you buy the 2 6.0 high output batteries and charger you get this fuel m18 2.5 gallon wet/dry vacuum free.
I'm curious to know V if you don't have the lunch box can you put some half containers beside it and does it level off.
I bought come cleats 3D printed and put them on my old vac it works great
Hows the height when put on the packout pack next to another box?
@@rjmac3001 it’s a few inches smaller than the half tool box or cooler works great. Look up JakeOfALL on UA-cam and you will see
If any company needed local stores its Milwaukee. Wouldn't it be nice to go straight to a Milwaukee distro store and pickup specialty tools, accessories, vacuum bags, batteries etc......also a place to get tools warrantied/repaired?
The hose can attach to the exhaust port to be used as a blower
Vince thanks for helping me score of the three piece pack out deal for $109.87!! Me and my coworkers are stoked to be part of the VCG crew and now the pack out crew!! @vcgconstruction
Plaster dust test. Will it work or plug up.
Does milwaukee offer a longer hose or a extension sometimes the hose is two short
How durable is the tube and also can you flush drains with it?
I’m a plumber and I’ve stuck a 3/4 inch by 6 foot pipe in the end of the hose to suck water out of a hole about 5 foot deep
Wish we had a Home Depot here in the UK!!
Missed the pack deal. Learned my lesson and hit the notification button lol.
Sweet vac, love mine, pairs nicely with their track saw
Subscribed after that "SUCTION". Man after my own heart
Just picked it up thanks bro I love your show
I need help and or opinion I have both Milwaukee tools and Snap on tools both have a shop vac and I’m thinking of buying a new vacuum Milwaukee is 100 dollars cheaper yes that says go for it but Snap-On tools also has a very good reputation. Please help on your opinion
Couldn’t get the packout deal but did get the vac and light
Vince…… will this vac hook up to any m18 power tools and collect the dust? Or is that a negative
I would be curious as to what the suction is like with the fleece bag and the HEPA filter on the packout vac. I use bags on one of my 5hp Ridgid vacs and I had to switch from the HEPA filter down to the fine dust as it lost so much suction with both bag and HEPA filter.
The packout glitch was more extensive than just the 3 piece for 109. I got the bottom wheeled box for 59.67, which was all I was after in the first place.