[2024] Easiest & Cleanest Modding Arcade1Up Mod Method! Step by Step (No Experience Needed) Batocera
Вставка
- Опубліковано 27 вер 2024
- New Method Revealed! Guaranteed to be the fastest, easiest, and cleanest method to install and mod virtually any Arcade1up with Batocera. Step by step tutorial where anyone can follow along and mod virtually any a1up. Doesn’t matter if it’s the simpsons, nba jam, turtles TMNT, nfl blitz, xmen, street fighter, final fight, mortal Kombat, pac man, joust, marvel vs capcom etc.
The entire A1up kit used can be found at:
showtimearcade...
Got my kit 2 days ago and followed your video. Thanks for the easiest tutorial I’ve found! My first mod and it worked out perfect! Couldn’t be happier
I think B-Kong did a video on how to connect the on/off switch to the power supply. Then you could turn it on from the on/off switch on the control panel instead of reaching behind the cab.
😊🤷♂ this thing is great everything ready to play all u have to do is put on the buttons and plug in some wires this is : D the easet thing i ever seen : D fun
Yes. It really is that easy
do it work for the simpsons arcade 1 up??
@@vietdragon5610 yes but you don’t want the vertical screen mod. You’d want a horizontal mod for the simpsons
Can the power on toggle be set up so it can used instead of turning it on from the back?
Yes but that would only be able to turn the raspberry pi on/off. You’d still have to find a way to power the monitor and marquee. This method does it all. You can also use a wireless remote or a wireless button that plugs into the outlet and press the wireless button
lol it takes 5 minutes, 40 minutes of edited video later-
Valid point lol. It really does take 5-6 minutes to mod the inside. Swapping buttons and joysticks about the same amount of time. Making the video takes far longer than the actual installation and then we have to explain and demo the mod. We hope it really helps.
I live in apartment so of course space is at a premium, I could run one cabinet so I want to maximize it.
I am thinking of the Atari 50 cabinet because it already has a spinner and trackball.
Does the kit have inputs for those?
@@greyshadow9498 all controls have to be replaced. The trackball and spinner would need a usb connection to plug into the raspberry pi and then it would work.
@@ShowtimeGaming101 Bah in was hoping the kit's controller board would have the proper inputs.
If I need to replace the parts, I may as well just do a custom deck. Which is fine because the Atari 50's stick position is kinda awkward I hear.
Maybe a Street Fighter Deluxe cab and just knock out player 2 for spinner and trackball.
Thanks for the info! Got some work to do.
@@greyshadow9498 that works as well.
Does it have Bluetooth for a controller or plug in to play the console games with a controller ?
ua-cam.com/video/FpPDVI2OnuM/v-deo.htmlsi=RwFrcoqnTkQOQvI4
It has Bluetooth built in so you can virtually play with any controller with or without a USB dongle. Refer to this video.
Is there a list of the games included?
Once you’re on the website. Click the tab that says “raspberry pi games” and you’ll get a breakdown.
do this work on any arcade 1 up??
Okay I have seen in other comments this will work with new 1up's. What about old ones? Possibly might buy one on the marketplace. Also I assume the games are stored on the sd card. Should be able to plug it into my pc and add/remove mame games.
The ones at best buy are the deluxe model. I assume this will work with the deluxe.
@@spidernose works on all versions but you must put in the notes the model number to be sent the proper parts. This also includes the first gen models as well.
@@ShowtimeGaming101 Got it. Can I add/remove games from the sd card?
@@spidernose yes you can but it’s recommended not to alter without experience as it may cause issues.
@@ShowtimeGaming101 Thanks for the info!
Are you still able to play two players? Since the coin button in player 2 spot?
Yes. You simply press the analog stick down on the spare controller and scroll over to “player 2 start” and set that as the button you prefer.
So you’re able to play with stock controls? Or you have to use the spare controller?
The Arcade1up buttons have to be swapped.
@@ShowtimeGaming101What I meant, my bad how I wrote it, is can you use the controls you just installed for player 2 or do you have to use the hand controller?
@@CorvetteLS7427 it’s simple. You use the hand controller to enter the settings by pushing down on the analog stick. Choose “player 2 start” and set that to any free button. That button is now the player 2 start button. Then you can go back to the joystick and play 2 players off of the one joystick you have.
Can’t find the link to the site to get this kit
showtimearcademods.com/products/complete-arcade1up-vertical-screen-mod-kit-680-to-1-with-raspberry-pi4b-1-player
Thank you
Arcade 1-UP is in serious financial trouble. Last I heard they are on the verge of bankruptcy. They are not announcing anything new this year.
Not just so easy and fast
Just put a 60 in 1 in it.
@@THEMARTIALARTSCHANNEL-bb4fx this method is far easier and better than anything else out there. For the same price you get a far superior system that’s far easier to install.
I assume centipede is available. If so could i add a trackball and connect it to the samw encoder?
@@armandonagao7311 yes it would be very easy, but it would connect directly into the raspberry Pi with a usb and not the encoder.
Just purchased.
I live in uk, so I’m hoping they send uk plugs and power strip as do know I live in uk.
I was going to order parts my self, but this option is already good to go and only costs £50 more.
Just need to wait now.
One issue I have, I have galago deluxe so the screen and controls are one unit.
Just hoping I can get screen out without removing any side panels.
Great video.
The installation is 100% the same but getting to the controls, you may have to take a side panel off.
Power supply should come with an adapter
Where can I order this mod kit thank you
showtimearcademods.com
1942 arcade 8 way joystick?
Is US only? Checking the website for shipping.
International shipping coming to Canada and the UK this week.
@ShowtimeGaming101 ordered mine today. Shipping to UK.
Got my confirmation order number, should be here next week.
Does this mod work with the newer deluxe model cabs?
Yes it does. The install will be 100% identical. The only difference is that the control panel on the deluxe does not come off from the top. Otherwise the installation is exactly the same.
None of those games use an 8-way joystick?
None that we’ve found so far but if you do you can always use the Bluetooth controller
What is the difference between the 2GB and 4GB besides the 139 and 179 price point? The game list is showing same amount of games on each
A raspberry pi4 vs a pi5.
@ShowtimeGaming101 also no q&a on page sorry to bother - I can use the joystick and buttons that came w the arcade 1up correct? Or do you also have to buy the joystick and buttons controls from the site as well?
showtimearcademods.com/pages/faqs Check out the faq page. Also send your inquiry to the help center page. You should get a very quick response