I really like how you're teaching them safety at the same time: "Hey! Don't put your fingers under there!" How many are there today who wish they had someone alert and pointing those mistakes out when they were Tucker's age...sobering.
Only thing that disappointed me was the fact there was still green paint in places e.g. engine bay and inside cab. For all the work you did why leave the last 2%?
Kevin, once again, you have done an absolutely amazing job painting that rig. Clinton, I hate to say it, but I think Kevin is becoming the star of the show.
Our shop started out with a 6 cutting head pattern burner and the the owner bought a water jet, the he paid to upgrade the pattern burner with a computer and he was so cheap he gave me one day for the manufacture guy to train me to run the machine with the computer! The man told me I should have at least 2-3 months of training to learn but I was given one day so you can imagine I had a train another guy in the shop but that’s really when I learned the most about it, believe it or not! Then they updated the show addition with a larger water jet and before retired they had bought a third water jet! They were making big time bucks with three machines running and the computer torch was just sitting there and I hadn’t run it in two years and I was hoping he would have asked me to cut something because I was going to tell him to figure it out himself because I forgot everything I was taught! That’s my story Clint and I hope you get a water jet, that this is so cool because it cuts any kind of material rubber, wood, Teflon, brass,aluminum,stainless just name it brother but I think it was expensive to operate and it cuts with water and garnet! Butter bad ass pressure! I imagine you’ve already researched it anyway! Your fabrication on the wrecker is awesome Clint, I always enjoy watching y’all fabricate my friends! Thanks for sharing Clint and crew! Kirk from down south! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👌🏻👌🏻👍🏼👍🏼👍🏼👍🏼🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Would you please introduce everyone and their relationship to you, I don't know if you have already done it, I am a new subscriber. OUTSTANDING JOB ON THIS PROJECT.
I really really like what y’all have done. I would have flipped the tool boxes upside down and added gas lift shocks so the doors opened upwards to make them easier to get into. Like how the fenders and everything else turned out though.
@@derek763 I wasn’t going to say anything but that’s why we started flipping our boxes at my dads shop because the doors were getting damaged way to often. We flipped them and it solved a few problems all at once. We really like the roll up doors but they come with their own set of problems too.
For some reason when I first read this I thought you were talking about making the vehicle doors open upwards with gas assist shocks (which would be kinda cool but impractical). I blame the lack of caffeine in the morning. I agree on the toolbox doors opening upwards solving a lot of problems since in that configuration they'd just dump whatever is on top of them if its too heavy and don't get heavy stuff dragged across them.
Looks GREAT!! Kevin painted it white to remind him of snow! " I can explain"....guilty!! The whole team did an awesome job!! Thumbs up!! Stay safe!! Jim
“so i’m gonna leave the camera with Kevin”…, well Clinton, you just don’t know what kind of hell you have unleashed by leaving that camera behind in Kevin’s care & control…, hahaha..! By the way Clinton, you can just hang a few remote live feed cameras on the plasma table, at different angles and levels, and when you hit the button to cut out parts, automatically it will go live.., I will watch every second that is broadcast…, cause I have no life. That thing is mesmerizing to watch in action. These fabrication videos are awesome. Thank you sir. P.S., nice paint job Kevin, very nice.
Clint at Kevin " it's July !", that's wright's bub Christmas in July 😂. Should of painted the circle and star white, other then that absolutely awesome.
And Much Respect for you to throw An Awsome welder (Tucker) and Mason in on the project shows your confidence in them !! BEST DAD EVER !!!!!!!!! You deserve a Super Good Fathers Day Whatever !! Every Year
Great job guys, tacker Tucker 😂, Kevin paint job👍👍, Clint the supervisor and of course Mrs. C. the brain behind this operation 😊. Hey bub not sure what's more impressive that c n c or that awesome looking wrecker !
Nice looking wrecker. The paint job is killer. Ole Kevin has still got it. I would love to see that in use some day. Your whole team deserves a pat on the back. Seems they all are talented in some way. Great video. Thanks for sharing, Clinton.
Another great build Bub's! I could have paid for this wrecker twice over, in the last 48 yrs, pulling my log trucks, forwarders, skidders ECT!. Keep up the great work and, videos! You're friend, The Old VT Logger!
Very cool build, entertaining crew, I like that you all get along well, no drama, but messing with Scott every once in awhile about having his pockets full of bolts is funny !
I remember every video on this monster. It was a classic when it was finished. I guess I’m going to have to join your patron channel to get more videos.
Well, must have sold it already, as I’m just seeing now, about 5 months later, nice looking wrecker, only thing different I’d have done, was get boxes that open up 👆🏻 so the lid would be out of the way when reaching for things
Ive been going on other youtube channels that have or built or building an off-road wrecker. Told them the C&C wrecker will kick their ass. Suppose to be the biggest wrecker except maybe same size as Heavy D. Matts off road has a off road wrecker and Murphys diesel or towing is building Hell Boy.
Dirt perfect is green with envy about your green truck..his isn't working yet and can't be as cool as the one that you have.Give him a call and a test drive.. you might have a sale.
Tacker/Tucker name for t-shirt! Dad picking on you that's ok. You are related to the book keeper😂 a raise or a little higher bonus at the end of the year. Dad wants a shirt double the price and cash only. 😄 Tucker this video will delete after you read it. Don't let Dad read this comment. Wrecker lookin great. Great work as always 👍
I don't care what anybody says, I'd like to see Kevin doing painting on some of the projects.
I would too
Sausage fingers did an awesome job on the paint. The Governor
Tucker is quite the welder, excellent job.
Kevin is worth his weight in PAINT 🎨 😂!!!!!.HE IS ALSO A VERY FUNNY GUY...ANOTHER GREAT JOB TO THE ENTIRE TEAM 👏 👍 😄...
I think the black and white just fits this truck
I really like how you're teaching them safety at the same time: "Hey! Don't put your fingers under there!" How many are there today who wish they had someone alert and pointing those mistakes out when they were Tucker's age...sobering.
Maybe paint the grill to match the mud flaps. Kevin's T-shirts... "Dear Santa, I can explain" and "Dear Santa, it wasn't me!" lol
Hell of a paint job, Kevin! Truck looks awesome!
Only thing that disappointed me was the fact there was still green paint in places e.g. engine bay and inside cab. For all the work you did why leave the last 2%?
Kevin, once again, you have done an absolutely amazing job painting that rig.
Clinton, I hate to say it, but I think Kevin is becoming the star of the show.
Thoroughly enjoyed Cousin Kevin running the show! It shows you can leave Kevin is charge and have no worries!
. . .mostly. 😉
I dont know why painting vids are not watched ,, Kevin is an artist ,,gives the job class,,
Awesome looking wrecker guys!! It’s truly a beast, hope whoever purchases it will share a video or two with it in action!!
Would have been a god day for someone to be stuck on the railroad tracks and C&C come to the rescue again!
Hay the factory going to get on you guys it's better than factory nice job guys 😊 😮😊🎉
Our shop started out with a 6 cutting head pattern burner and the the owner bought a water jet, the he paid to upgrade the pattern burner with a computer and he was so cheap he gave me one day for the manufacture guy to train me to run the machine with the computer! The man told me I should have at least 2-3 months of training to learn but I was given one day so you can imagine I had a train another guy in the shop but that’s really when I learned the most about it, believe it or not! Then they updated the show addition with a larger water jet and before retired they had bought a third water jet! They were making big time bucks with three machines running and the computer torch was just sitting there and I hadn’t run it in two years and I was hoping he would have asked me to cut something because I was going to tell him to figure it out himself because I forgot everything I was taught! That’s my story Clint and I hope you get a water jet, that this is so cool because it cuts any kind of material rubber, wood, Teflon, brass,aluminum,stainless just name it brother but I think it was expensive to operate and it cuts with water and garnet! Butter bad ass pressure! I imagine you’ve already researched it anyway! Your fabrication on the wrecker is awesome Clint, I always enjoy watching y’all fabricate my friends! Thanks for sharing Clint and crew! Kirk from down south! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👌🏻👌🏻👍🏼👍🏼👍🏼👍🏼🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
I know they are cool but pricey
Super Sweet. That’s Right.
Would you please introduce everyone and their relationship to you, I don't know if you have already done it, I am a new subscriber. OUTSTANDING JOB ON THIS PROJECT.
I really really like what y’all have done. I would have flipped the tool boxes upside down and added gas lift shocks so the doors opened upwards to make them easier to get into. Like how the fenders and everything else turned out though.
Second this
Those boxes are way to awkward to reach into , also the doors wouldnt be long getting wrecked from chains or other heavy items sitting on them
@@derek763 I wasn’t going to say anything but that’s why we started flipping our boxes at my dads shop because the doors were getting damaged way to often. We flipped them and it solved a few problems all at once. We really like the roll up doors but they come with their own set of problems too.
For some reason when I first read this I thought you were talking about making the vehicle doors open upwards with gas assist shocks (which would be kinda cool but impractical). I blame the lack of caffeine in the morning. I agree on the toolbox doors opening upwards solving a lot of problems since in that configuration they'd just dump whatever is on top of them if its too heavy and don't get heavy stuff dragged across them.
Agreed! Good for inclement weather!
GREAT JOB KEVIN!!!!!!! Don't care what anybody says. WHAT A BEAST. Now it needs a name.
Perfekt look at the rigg. Hope there is an youtuber who byes this rigg😊
As a retired spray painter I like to watch your paint vids, this truck gonna be so cool 😊.
I got to give it to Kevin 2 thumbs up 👍 👌
Het, Kevin, that humongous wrecker looks fantastic. Great work in the paint booth.
Wrecker is wicked off road rescue , thanks for sharing heavy D needs one ☝️
Looks GREAT!! Kevin painted it white to remind him of snow! " I can explain"....guilty!! The whole team did an awesome job!! Thumbs up!! Stay safe!! Jim
Where is your safety chains for when you tow stuff. The truck looks awesome, Great job
“so i’m gonna leave the camera with Kevin”…, well Clinton, you just don’t know what kind of hell you have unleashed by leaving that camera behind in Kevin’s care & control…, hahaha..!
By the way Clinton, you can just hang a few remote live feed cameras on the plasma table, at different angles and levels, and when you hit the button to cut out parts, automatically it will go live.., I will watch every second that is broadcast…, cause I have no life. That thing is mesmerizing to watch in action. These fabrication videos are awesome.
Thank you sir.
P.S., nice paint job Kevin, very nice.
I gotta say, Kevin alone with that camera was the funniest thing I've seen in a long time. LMAO!
The paint job did wonders!
I agree with Kevin! The truck should be named Oreo! 🤣😂
That looks more huge in black and white !!!!!
Cool,cool,cool, 👌👍🇺🇲
Tucker's welding skills are unbelievable so professional what an asset to your organisation keep the excellent videos coming.
THAT… is one bad ass wrecker. .‼️🤘🏼 good ta see Tucker a crack, a smile also🤨😁👍🏼
That’s one of them Highway Thru Hell machines
Is it me, or does Tucker seem to be mad at the world, like Uncle Scott?🤣
Some of us just look mean or angry, cuz that's how our face sets. Can't be helped😐
Clint at Kevin " it's July !", that's wright's bub Christmas in July 😂. Should of painted the circle and star white, other then that absolutely awesome.
looks great,,,,,,,,,,
Sweet m1070 hay you should have painted the grill logo like your mud flaps. It would make it pop.
Kevin is a paint jedi warrior of the highest order .
Yeah another awesome video and I appreciate your whole crew and family doing a great job
Thanks 👍
Everybody there is so skilled including your boys. Enjoyed the video. I could hear that back up beeper all the way up here in Minnesota!
And Much Respect for you to throw An Awsome welder (Tucker) and Mason in on the project shows your confidence in them !! BEST DAD EVER !!!!!!!!! You deserve a Super Good Fathers Day Whatever !! Every Year
awesome work , paint too . send a screen shot to jerr dan
Awesome
Fabrication, Paint, Meckanecking, Welding, and Engineering!
BADASS all the way around! 👏🏽 👍🏼☺
Kevin, very nice paint job. Excellent project well done.
Great job guys, tacker Tucker 😂, Kevin paint job👍👍, Clint the supervisor and of course Mrs. C. the brain behind this operation 😊.
Hey bub not sure what's more impressive that c n c or that awesome looking wrecker !
Nice looking wrecker. The paint job is killer. Ole Kevin has still got it. I would love to see that in use some day. Your whole team deserves a pat on the back. Seems they all are talented in some way. Great video. Thanks for sharing, Clinton.
Another great build Bub's! I could have paid for this wrecker twice over, in the last 48 yrs, pulling my log trucks, forwarders, skidders ECT!. Keep up the great work and, videos! You're friend, The Old VT Logger!
Wow now that is one awesome truck thanks for your time and consideration top job top team 🇬🇧
Great spray paint job Kevin 😊🥇😎thanks for the video guys 👏👏👏👏👏👍
My first words were , Damn that’s a big truck! Cool ! Great job guys !
Very cool build, entertaining crew, I like that you all get along well, no drama, but messing with Scott every once in awhile about having his pockets full of bolts is funny !
Oh yeah! Kevin did a great job on the paintwork!
Boy that is one heck of a bunch of work to paint that truck. Great work Kevin.
Good looking rig
I remember every video on this monster. It was a classic when it was finished. I guess I’m going to have to join your patron channel to get more videos.
A good looking wrecker guys
That TRUCK is BAD ASS!!!! NICE JOB...
Sick wrecker paint grill and all!
great job!
Tell Kevin that us professional painters don’t get runs, we get “flow indicators”. But that is one sharp looking buggy. 😊
That truck looks really, really good in white, mighty fine fellas!
What a transformation. Great job. That wrecker is awesome
Man that tow truck is huge the work you’ve done on that is better than new trucks and that paint job sets it of just fine
a good crew and boss to do these quality projects.
Well, must have sold it already, as I’m just seeing now, about 5 months later, nice looking wrecker, only thing different I’d have done, was get boxes that open up 👆🏻 so the lid would be out of the way when reaching for things
That is the coolest truck I’ve ever seen
So Kevin's going into the wrecking business whoo hooh
Your channel is the best! I watch everyday. The Oshkosh wrecker is AWESOME , and you have a GREAT CREW !
Kevin has a GREAT sense of humor!
Excellent job on painting the tow truck. Not bad on the truck either. Should do you guys well
You guys need to show this one to Ron Pratt!!
I frikkin love it! That thing is a beast!
She's looking sharp guys.
Awesome job awesome wrecker build great video thanks Clint and Kevin the guys
Wrecker looks like a beast! Awesome job Kevin!
Kevin is an impressive painter
Clinton the truck looks awesome. Kevin did a nice job on the paint. The custom touches you added should make the new owner quite happy
She would look awesome painted up to look like Optimus Prime.
Clinton and company awesome build you and your crew have amazing talent! The paint job really pops! Thanks for sharing! Kevin
On the paint side make a time laps, those are pretty cool. I was excited to see it black on black everything 🤘🏻
Very Impressed With Your Work 😊🙂
Nice vid!
WOW what a GREAT Job done on that Baby! Keep up the good work and shared Humor with each other!
Completely Awesome! Great work" "Bubb"s"
Beautiful job guys , thats some monster wrecker !!
Needs a name !!
Incredible paint job / Incredible work / Incredible Truck wrecker
Ive been going on other youtube channels that have or built or building an off-road wrecker. Told them the C&C wrecker will kick their ass. Suppose to be the biggest wrecker except maybe same size as Heavy D. Matts off road has a off road wrecker and Murphys diesel or towing is building Hell Boy.
Thanks
Great paint job. I'll watch Kevin painting equipment.
AWSOME BUILD. #murphysdiesel needs this.
Great work Kevin, nice work everybody on this fine wrecker, fine video.
Awesome paint job awesome truck. Love your channel
Thanks 👍
Dirt perfect is green with envy about your green truck..his isn't working yet and can't be as cool as the one that you have.Give him a call and a test drive.. you might have a sale.
Tacker/Tucker name for t-shirt!
Dad picking on you that's ok. You are related to the book keeper😂 a raise or a little higher bonus at the end of the year. Dad wants a shirt double the price and cash only. 😄
Tucker this video will delete after you read it. Don't let Dad read this comment. Wrecker lookin great. Great work as always 👍
That's because Clinton is all business!! he ain't no joke like dirt perfect, operator my ass.
Kevin ain't NO Brain Surgeon. But, he did stay at a Holiday Inn Express once. And, he's a good painter, too !👍
The paint job look good. The truck looks Great
Mighty Fine!
That truck looks AWESOME! ! ! You guys knocked that one out of the park, for sure.
I love your paint and body videos. I had hope you’d do more. I really liked watching you build your truck with all body work and paint
That is truly a fantastic job that would pull out the USS Enterprise
That thing has farmer cris wrote all over it!
It turned out looking fantastic guy's, I doubt you'll have any trouble selling this monster. 👌
Great video and truck, turned out really nice!