25mm WHEEL SPACER INSTALL 392 WIDEBODY CHALLENGER
Вставка
- Опубліковано 2 жов 2024
- Back at you with another video. This time around I met up with @donauchi.ink to take in his 2019 dodge challenger 392 widebody to get 25mm H&R wheel spacers installed! There was quite a change in the look when big booty Judy rolled out! Hope you guys enjoy the video! As always don't forget to sub to the channel to see more gasoline madness! Shot for STR8FIGGAMAG. #dodgechallenger #392 #widebody #widebodychallenger #donauchiink #str8figgamag #srt #hemi #wheelspacers #25mm
i need this video!! i just got the flares installed i have widebody offset wheels to oem spec and they sit just like yours did before the spacer. glad i looked this up
@@Alwayz_Angry Good stuff brother enjoy that new whip!💪
Careful on the spacers. Please remember to check the torque on your lugs, every oil change.
Will do!
what are issues that you have to be mindful of when putting on these particular spacers? I just bought them an i'm having them put on now should be done buy next week just wondering if there's anything that i need to be mindful of or worry about
@@reginaldferrell3607 Just make sure there cranked always.
@@reginaldferrell3607 You should really read up on spacers. Driving your car at high speeds, over time, can cause lug nuts to loosen with spacers. With spacers, you need to have a tire tech check the torque of your lug nuts every three months...or at least every oil change, just to make sure you remain safe.
now you need to adjust your camber in the rear cause it's noticeable
For sure!
@@SFMCOLLECTIVE you should try what I plan on doing with mine I. Gonna try Mickey Thompson Sportsman Pros which have the Drag style wrinkle wall but are made for the street. Super wide tires and bias ply. I figure it will be like running a slick but for the street.
I had the vicrez demon widebody on my 16 hellcat I didnt install them yet I'm still looking for the perfect spacers for it
what size spacers were you thinking about running ?
Do you think 15mm spacers would require cutting of the stud bolts? Never had my wheels off the car so not sure if the back of the devils rims are slotted or solid?
I hear people have run into problems with 15mm spacers on this particular car. I would recommend a 20mm plus. Second part of your question I do not know the answer to. Hope this helped you out! Thanks for the comment!
Why not do all 4 wheels?
@@Mikedude8462 I think my brother just wanted a heavier hold in the rear end.
That intro 😂
Can you put the link to the site you bought the spacers please?
Will get that info for you.
@@SFMCOLLECTIVE thank you I really appreciate it
@@edgarescobar7830 www.tdotperformance.ca/h-r-springs-50135715-trak-drm-series-silver-wheel-spacers.html?gclid=EAIaIQobChMIlPWp3Ji39QIVYnRvBB2ODwEMEAQYASABEgKdX_D_BwE
That's the link.
@@SFMCOLLECTIVE thank you so much bro. I had one question your on stock suspension correct you don't rub or bump to your fenders?
Here come the paint chips!!
I think he just bought some sort of flaps for the wheel wells. Interested to see how that will look. But yea otherwise for sure paint chips!! lol!
Nothing has changed
I dont get it...
huge tire gap and tread outside the fender well???? Looks like my power wagon
You lost me with the mask!
Im sure they fooled us all at one point this was a long time ago
not sure how you got these to fit, did they cut your stock studs? I tried 25mm and the stock studs do not work
No way anyone is cutting the stock studs lol. The spacer fits over existing hub and studs, and has built in studs on the new spacer.
@@SFMCOLLECTIVE Very strange, I put hubcentric spacers on to fit today for my WB Scat and the stock stud length sticks out slightly further than the 1” spacer causing the wheel not to mount properly. Hence me having to look for something else…
Check at 3:30 mins
@@xHizzE Yea that’s definitely really strange… Sounds to me like your gonna have to swap fora different pair. I don’t think we ever ran into that issue yet…
Spacers are dangerous.
Defiantly can be.
Is the 25mm the minimum wheel spacers for 392 to have flush surface against the studs?
Yes.
@@SFMCOLLECTIVE.. Thank you. Nice car you have and good offset
Wheel gap horrendous
demon 170 has bigger gap for a good reason....the wheel gap is there for the car to squat and it rub the fenders or flares. lowered challengers and chargers can't launch off the line that low. if you're not racing then who cares you're right but for guys who actually use their mopar we need to at wheel gap
Looks amazing! I got a 392 widebody as well, where in Ontario are you? I am in Ontario as well!
I got told that I can go maximum 5mm, how is it doing? What are the downsides?
Thanks for the comment Brother!👍 This video was filmed in Toronto. Not sure why they told you that, but so far haven't had any red flags anywhere. Possibly a little extra tire wear.👍
@@SFMCOLLECTIVE Damn I really need myself some, I’m from hamilton! They look so good I am just worried of running into issues
Do the spacers compromise the torque/power that the wheels receive......could they cause an issue at high compression?? Thanks for the video.
Never had an issue. 👍
High compression? Shut up
@@PunisherSS You high!!
Did you have to buy extended wheel studs to fit these spacers? if so, what brand
No the studs were a part of the spacers kit as one.
I like it
Did this create any understeer problems?
No
its a fucking cool car……but the mask in your face says a lot about you 🤦🏼♂️
Would it be possible to the 25mm spacers plus 315mm tires all around
I do believe it would rub in the front
@SFMCOLLECTIVE doing this on my widebody charger on Friday!!! Great video brother. My car is lowered with the Eibach Pro kit and went the t25mm pro kit spacers. I have more camber than a non lowered car and run 315's all the way around. I sure hope it works out. Thanks for your video!!!!
amazing
Front and rears or just rears?
Both Brother.
It looks good 💯
😁
what size tires?
305
That SHIT IS SWEET !!
Thanks Brother! 💪
Has it been driving same? Any minimal feeling while going through turns or anything? Looks good.
Driving experience has changed for sure. Seems to hold the road better now. Around turns, again feels more "grippy" and has a more "stance" feel to it. Thanks for the comment! 👍
@@SFMCOLLECTIVE thank you for the response. Planning too do this on my wide body.
@@PaytonDowns Absolutely Brother! Hey if you want you could send a pic when it's done to str8figgamag@gmail.com would love to see it! But none the less, Enjoy! 👍
@@SFMCOLLECTIVE I will man. Saved your email. Where you located?
@@PaytonDowns Much appreciated!👍 Located in Toronto Canada. My guess is your USA?
Looks phenomenal
do you have lowering springs on there as well
No lowering springs brother.
@@SFMCOLLECTIVE thanks man, looks good
@@SFMCOLLECTIVE get some. ASAP
@@PunisherSS You knew damn well that shit wasn't lowered
@@lmjames33 that's why I told him to get some, fuck face
say goodbye to your paint, but hey you like what you like that's the thing about cars everybody likes different things.
WTH you talking about
@@thelastofthebest8946
Was taking about how far the wheels sit out from the car, they are going to kick up a lot of road grime, no disrespect bro.
Your definitely right! Haha I don’t have spacers on my widebody and my whip is so gnarly scratched up! From things picking up from the tires I could only imagine with it sticking out that far
Stupid comment. Nothing going to happen to his paint. 🤣 🤣 🤣 🤣. It's the rear tires bozo. Some of these people don't know what they are talking about.
@@lmjames33 You got to be the stupidest motherfuker on UA-cam why do you think people put rock guard panels on the front and the back of the car you must be riding a damn bike and then you probably ain't even got a damn car lol 😂🤣
I went to 315/35/r20s by Fullway. Absolutely love the stance and the tires significantly improves the ride over stock PZeros eg, firmer in Auto and Sport mode. Set of 4 were $731 USD for SPWB-6 speed.
if you look up Fullway Tires reviwes on Amazon, you may see picks of my Destoyer Grey.
Very good option 👌 appreciate the input brother!
You have a wide body and you went that size how’s the ride and steering?
@@brandoncampbell7809 the ride is perfect! This brand tire has great feel. I researched the size difference on UA-cam with NO negative feedback whatsoever.
@@jamesrodney9542 Thank you, I was looking into the same size for my car and was wondering the ride feel
Take em off.
I have a widebody and I’m not a fan either
I have one also why not just go with a 315 tire?
I second that. Take em off and get a wider tire.
Agreed eh or maybe a smaller spacer, it just seems to stick out to much! Or like you say a bigger tire
I think a 15 with a 315 would’ve been a nice solid look but they’re happy with the results
Why does the front of your Scat Pack 392 say *SRT* for?
because a 392 is an SRT 😒
@@NoOneKnows1 I eventually learned that when I purchased a 2022 Dodge Challenger 392 R/T Scat Pack.
Ruined an already good looking car
If it was lowered it would look much better