2009 Chevy Cobalt inside front door handle replacement
Вставка
- Опубліковано 13 січ 2020
- My 2009 Chevy Cobalt driver's door handle on the inside would not open the door and was not returning to it's normal position. The video shows how I repaired the problem without removing the door panel.
- Навчання та стиль
Thanks Dave. Got a replacement latch from Rock Auto for $18 and did myself in under 30 minutes. Probably saved $200 plus from not having to take it to the dealer or other shop.
One note though. When unclipping the cable, the cable might disappear. It does not fall down inside the door, but rather goes up above the door latch opening. I almost panicked and started taking the door panel off before watching the video again and checking above where it was hiding.
This does actually work. It is very easy to repair. I used a fork and a screw driver. Very easy to install and that satisfaction for saving a dollar than going to the mechanic
I love how u had tha good word in tha beginning of the video spread tha message!!!!
Thanks for the feedback.
you just saved me so much money with a five minute repair thank you
You are very welcome. Glad it helped.
Thanks for the guide! My handle broke and this was a huge help!
You're welcome, glad it helped.
Worked perfectly! Exact same problem with my 2010. Thanks for the great video.
Glad it helped.
Super helpful, thank you! My passenger door handle just broke and the new one is on its way!
Glad it helped!
My mom's car is 2008 model. Her car has same problem. I saw your video last weekend and I ordered the replacement. I just installed it. The only problem is that the cable in her car is really short. It can't pull out. I used my left hand to put the black part in place and use screw driver to push down the black part and it is clipped in place at the bottom (this step took me 20 min). It is very useful video. Thank you.
Thanks for the feedback and sharing your experience.
Perfect sir! Gonna do as you did, easy and very well explained
Thanks for the feedback!
Thanks for the video im taking these off to paint since the foil chrome peeled off
Thanks for your comment and the tip.
You don't like the white? Lol
Fixed in less than five mins thanks to this video. Thanks!
Thanks for the feedback!
Thank you. This is going to be a breeze now that you've shown us how it's done.
Thanks for your comment. Glad you found it helpful.
this happened to my 2006 Pontiac Solstice and the part was not available. The inner door handle for the Cobalt is a perfect fit!
Thank you I have the EXACT same issue. Been having to open door from the outside for an entire year. Ordering a new one now
Great, glad it helped. Thanks for the feedback.
Holy cow I think putting the cable back in is the hardest thing I ever did in my life like wtf
It is a little more difficult if you don't take the door panel off.
I have the exact same make and model and for some odd reason the cable is not the same length as yours and ended up having to take off the whole panel to get to the damn thing
Thanks for your comment. Sorry my method didn't work for you.
@@diywithdave3186 no worries still very helpful
@@titanharper7184 glad to hear it. thanks.
Can someone help me with ordering the right part? This is my first time doing anything on my car by myself. Wish me luck 😂
Spread the gospel 🙏
What about the outside?
The chord is too shallow in the door I can’t connect the handle to it
My daughters car is having the same issue. I guess I should order a new handle.
Thanks for the comment. Yes, it is much more convenient when the door handle works properly.
Where did you buy the new handle?
I don't remember exactly, probably Rockauto.com or Ebay.
Disliked for the Bible verse at the start... I came for the video which you did a good job of showing but I don't need your religion preached on me