I just completed mine. Thanks again. One thing you didn't show was how to take the cigarette lighter/charging port out. I couldn't figure out how you took yours out, but I was able to disconnect the wires clip from them. I had two ports. The rest was just like you showed us. Thanks again!
I don't quite remember, it's been awhile. But I remember looking and finding clips. I think they were white in color and they snapped together. I think I had to pinch them then pull them apart.
I cant get the big honking piece back into place correctly. The screw holes of the side panels don’t align with the yellow plastic screw holes - and I can’t persuade them into correct alignment. Take lots of pics and videos of your work if attempting this yourself.
Hey great video!!! However, I got to the step to replace the bulb but the replacement bulb is not lighting up. Also I got the same 2721 bulb but still no light. Could the problem be a fuse?
Hey ! First thank you for watching. What I would do is use a circuit tester pen to determine if your getting current to the bulb. If not then check fuse. Good luck ! Oh btw if you don’t have one they are inexpensive no more than 10$ but come in handy.
I have one out of the fog light switch. That one is part of the switch itself. I never bothered to change it because here in Virginia, it's not required to light.
@@mind_numbing_vids4479 What of the bulb does break? Mine totally didn't break or anything while trying to remove it with pliers... Asking for a friend... 😒
How many pennies & dimes did you find in there? Mine didn't go out, but I had weird codes from coins shorting stuff out that managed to get into the shifter. Also, I have a white wire with a green stripe on it that's been clipped. It's near the fuses. Got any idea what it does? I think somebody disabled the daytime running lights to save the battery before I bought it.
You do realize the cup holders pop right up out of there and you stick your hand out of there and pop it out and change it just like that this is extra but thanks
I just completed mine. Thanks again.
One thing you didn't show was how to take the cigarette lighter/charging port out. I couldn't figure out how you took yours out, but I was able to disconnect the wires clip from them. I had two ports.
The rest was just like you showed us.
Thanks again!
Aw man I’m so sorry ! I’m fairly new to editing videos I probably lost it somewhere in the process. Thanks for watching !
How did u remove them?
I don't quite remember, it's been awhile. But I remember looking and finding clips. I think they were white in color and they snapped together. I think I had to pinch them then pull them apart.
@@Wigawackone oh ok thanks i was about to pull them but i got scared im might break them
Great video. Straight to the point
Thank you so much for this upload. Very appreciated!
Adam Wilder thank you for watching !
Awesome video! Thanks for sharing. Mine went out yesterday so I'll be attempting this in a few days.
Thanks! I might try that. You made it look doable for me.
so many things to remove just to replace small bulb
Excellent job. Thank you and keep up the excellent work.
Thank you for watching !
Awesome video. Very informative
Do they make an led bulb for this?
My bulbs that I got ( the same one as shown in the video) didn’t work for my car
Hmm I’m not sure, that’s what they told me to get at autozone. Check your fuse ?
Excellent video, well done !
Thank you for watching!
Very nice. Thanks for sharing!
Bio LoneWolf thank you for watching !
For some reason, my bulb is part of the plug. It's literally soldered into it. So I can't replace it.
..excellent! Just excellent!
Much needed video and well detailed, thank you! And I have a 2005 Chevy cobalt LT 4 dr, would these steps still be applied or is it different?
This cobalt is a 4 door sedan, probably should have mentioned that sorry!
I need to know how to install the wiring harness for a 2008 gear indicator light
Yes thank you for the share. Mine went out a few years back. Never drove it much until recently and it sucks not having this when its dark
Thank you for watching !
Mine only comes on like 5% of the time, I’m lost
It can be a bad connection, mine started like that also before it went out completely
I cant get the big honking piece back into place correctly. The screw holes of the side panels don’t align with the yellow plastic screw holes - and I can’t persuade them into correct alignment. Take lots of pics and videos of your work if attempting this yourself.
That is great advice, it really helps !
@@mind_numbing_vids4479 Any advice for a clueless newbie as to how to get those pieces to come together?
Hey great video!!! However, I got to the step to replace the bulb but the replacement bulb is not lighting up. Also I got the same 2721 bulb but still no light. Could the problem be a fuse?
Hey ! First thank you for watching. What I would do is use a circuit tester pen to determine if your getting current to the bulb. If not then check fuse. Good luck ! Oh btw if you don’t have one they are inexpensive no more than 10$ but come in handy.
The fuse for that also controls the heater & dash display. Bad bulb from the factory or a broken wire.
Thanks!
Thank you for watching!
Helpful video but quick question does the bulb separate from the plastic or the wires? Cause our bulb isn’t coming out😂
The bulb separates from the plastic. Just be careful so the bulb doesn’t break ! Thanks for watching
I have one out of the fog light switch. That one is part of the switch itself. I never bothered to change it because here in Virginia, it's not required to light.
@@mind_numbing_vids4479 What of the bulb does break? Mine totally didn't break or anything while trying to remove it with pliers... Asking for a friend... 😒
Couldn't get mine out either. For some reason my bulb it actually a part of the socket. It's literally soldered into it.
Como puedo arreglar la reversa de mi cobalt
How many pennies & dimes did you find in there? Mine didn't go out, but I had weird codes from coins shorting stuff out that managed to get into the shifter. Also, I have a white wire with a green stripe on it that's been clipped. It's near the fuses. Got any idea what it does? I think somebody disabled the daytime running lights to save the battery before I bought it.
Thank you for watching! And not that much lol
You do realize the cup holders pop right up out of there and you stick your hand out of there and pop it out and change it just like that this is extra but thanks
Believe me I tried. But maybe you can good luck !
Does this apply to all the cobalts out there? I have a 2010 model LT
I’m not sure about the two door models but all four door models should be the same
How do you remove the cigarette lighter from the part
Just pops in there eh my wires are solid I. It
Holy geez.
Hmmm nice but its 09
Think i just cut out a piece of the panel to access it