COYOTE SWAPPED COBRA - Front Suspension issues and bleeding the coolant system
Вставка
- Опубліковано 11 жов 2024
- In this video we are starting to put the car back together and run into another road block with the front suspension. unfortunately the speed engineering headers ever so slightly interfere with the install of the coil springs! of course we made them work but not without a fight! after clearance the isolator and the top edge of the spring we got it to just barely fit. I also cover the cooling fan wiring and an aftermarket temp sensor. I started the car and let it idle for around an hour and everything worked like it should! ENJOY!
Here soon we will be finally driving this thing!!!!
Appreciate the constant updates- your perseverance is to be admired. Thank you
Thanks for following along bro, next vid or two you’ll get to see it on the dyno and on the street!
Which headers did you get? Love the progress!
Speed engineering stainless foxbody coyote swap headers
Did you do anything to prime the oil system before starting it after the motor sat so long
@@ReyesBuilt I just cranked it for about 15-25 seconds total with the fuel & spark disconnected. The engine only sat a couple months but I still primed the best I could.
How did u make your sway bar work with oil filter
@@brandonjansen975 installed sway bar after engine. Now my filter won’t screw all the way out lol gotta drop driver side of bar to change filter. Just part of the swap life I suppose.