Це відео не доступне.
Перепрошуємо.
Duramax Diesel Fuel Filter Replacement (2001-2016)
Вставка
- Опубліковано 28 чер 2020
- In this video I replaced my Fuel Filter on my
2007 Chevy Silverado 2500HD LMM Duramax Diesel Crew Cab Truck
DIY: Very easy to change if you take out the fender liner.
Parts: Amazon
ACDelco TP3018 Professional Fuel Filter with Seals
www.amazon.com...
Camera: Amazon
GoPro Hero 7 Black
www.amazon.com...
Thanks for the video! Just watched and then changed the fuel filter on my LMM. Made it easy knowing what to expect!
Life saver, just did it on my 2016 3500, very straight foward just alot more tighter spots to deal with
VERY EASY TO UNDERSTAND ,,THANK YOU FROM ALAMO,TX ,,NEVER HAD A DURAMAX,,,BOUGHT ME ONE YESTERDAY,,I HAVE SUBSCRIBED--NO BULLSHIT CHANNEL,,NO FANCY CRAP...RIGHT TO THE POINT. THANKS
Best video I have found on changing the duramax fuel filter…thanks!
Stranded on the highway here. Got a guy bringing me a filter. We're going for it! Thanks
Thank you very much, for making this video. I'm about to change my fuel filter on my 2016 crew cab 2500HD diesel. I've only owned the truck for about a month and it's my 1st diesel 😁👍
Thank you! So that would be a LML Engine. Good Engine. But the high pressure fuel pump is a time bomb for your Engine. It has the CP4 model. Look into getting a CP3 model. Just my opinion.
thank god for your video straight forward no bs made it super simple and I'm confident I can change mine now. I've watched other videos and they made it look so hard that I've left my filter in the back of my truck not wanting to do it until now
Thanks. Glad it helped!
Excellent video, makes the job look easy, I’ve got 03 LB7, just got it, going to tear into the oil & fuel this weekend.
Best, most clear video iv ever seen on replacing this filter. Great job boss!
Thank you!
Great video and good camera work. Can actually see exactly what you were doing. No mysteries.
Thank you for a easy to watch no nonsense video.
Good video.
I have to replace this on my shop truck. Been too busy to do it but I finally got some downtime and will be able to get it done today.
Great video. Complete. No BS. Thanks.
Thank you!
Awesome video clear and straight to the point. I am not mechanically inclined and I did it will ease. Thanks for this video bro!
Thanks. Glad it helped.
Thank you for sharing, I’ve done it several times but at my age memory ain’t what it used to be 😂again thank you for your video.
Use an actual water sensor wrench. You can buy one for like $8. And take it off while the filter is still on the truck, so that you don't have to struggle holding it with both hands.
So awesome and helpful thank you!!
Just paid 381.91 for a fuel filter replacement. Unreal.
Excellent start to finish. Thanks
Great video, very easy to see what you're doing. The only bummer thing about your video is you're going to be needing tires soon $$$$
Buy a water filter sensor wrench for $8.99. It will keep your sensor from getting rounded
Thank you. Great video. Very helpful.
Mine is reading Water in fuel on my LMM...Probably have to replace the sensor...Great Vid
Pain is inevitable,
Suffering is optional.
Turn your Wounds in Wisdom,
AND,
What doesn't kill you,
Will only make you stronger!
My neck hurts :)...but much truth in those words!
Wow. How were you able to read that?
@@packwoodperformance4x474 LOL, my brother, besides looking for some information on changing the oil in the old 2500, those words caught my attention and curiosity. I believe they mean much to you, and are good words full of meaning and truth! My stiff neck thanks you and blessings to you and your channel. Peace.
Thank you! And yes those words mean alot as I should no longer exist from a bad motorcycle crash.. But great doctors and my strong will helped me survive.
Thanks for this!
Just bought an AC Delco fuel filter for a 2001 Duramax. The large o-ring will not sit inside the groove. I compared it to the old filter (china-made), and it seems the gap is slightly larger, letting the o-ring sit snugly. Not the case for the new AC Delco
Thank you. This video was very helpful for me
Thanks so much for taking the time to explain this process!! God bless, it'll save me some time and money! Really appreciate it 🙏!
Highly recommend replacing that factory bleeder screw on the top with a metal screw. The plastic will crack if stressed too much.
Agreed. That little screw cracked on me years ago. My truck was down for a week as no shops in town stocked this item. A .20 screw cost me a bunch of profit by sitting on my thumbs.
Thanks, I just changed mines yesterday, primed it and all, but it won’t start.. any suggestions?
Had my 2016 GMC 2500 shut down on me on the highway. Dash said to change fuel filter . I watched a few videos on here and changed my filter with no problem but when trying to start it back up it wouldn’t start . I primed the fuel pump before starting. I need help and any comments are appreciated.
EPA would like to talk to you about dumping fuel in your grass 😂
Key word "your"
FAAAK THE EPA
Prime it until the primer bulb is hard, then start it. Crank will be extended at first. Don’t give up!
Does the primer bulb supposed to stay firm? My doesn't on my lbz and my engine light stays on. I've bled it a few times it goes off again and my primer bulb needs priming again? It doesn't stay firm. Is it bad. ?
perfect video straight to the point!! THANKS !!
My Water Sensor has a piece of plastic debris located of top flush valve the piece of plastic stick on the black Sensor part maybe is the cause to send a code p0089 fuel pressure regulator I have any issue with my truck just the code light came and go
I replaced filter and new sensor hopefully the check engine lights gone
Thank u my brother 🙏🏿💪🏿🙏🏿
Yep,
I have a 2007 GMC & I can work with it & get it from the top,
But bought a 2007.5 GMC Duramax ( new body style) for my daughter, and was looking to change hers,
And it’s just too tight from the top,
I was hoping not to have to remove the fender well,
But don’t see any realistic way around it.
Unfortunately…
I was hoping someone might have a magic secret.
How do you reset the oil life of the fuel filter?
Great video man
Good video. I’ve been afraid to attempt this prior to now, but the dealer in town has gone full rouge and I’m done with them.
I hate dealerships as well. If you use Amazon, shop on there. AC Delco actually sells on amazon. Much cheaper than any parts store or dealership.
May want to invest in some TPMS. They will pay for themselves in 20k miles judging by your tire.🤣
Great work though! Thank you!
I hate TPMS. Ive had so many go bad.. I check my tires alot. These were on it when I bought it. The reason for the uneven tire wear is the tires were too wide for the previous wheels.
great video , but i think i will remove the tire just to make it easier
JMO If you can afford the diesel truck you can afford the proper wrench for the water sensor . Good video though
Electric tape over my tire pressure light fixed my problem
Good job ...thanks for doing this video
Thanks you explained it well!
Hello! Does the dash notification automatically reset when you change the filter?
The video was perfect. Thank you.
Doing my truck and I keep pressing on the button to bleed and nothing comes out. What could be the problem
It takes a bit as it is filling the fuel filter. If nothing still. Your prime plunger may be defective.
great video, definitely subscribing! 👍
Does the system recognize it as a new filter or do you need to reset it?
You reset it. The same as you reset the oil life when you change it on the dash.
Thanks! Now out to the driveway...
Is there one in tank?
If you crack, the fuel cap, it bleeds more easily
Great video man. Thanks!
Thank you for this
Thank you
This video will help me
Thank you. Glad to hear that.
After trying to start it the primer button needed to be pushed again..it was loose
Hmmm. Check to make sure everything is tight. After all the air is out it should be good.
Well come to find out it was never the fuel filter. The fuel pump was being eroded from the inside. The metal was breaking down and is ALL in my filter and lines. $15,000 to get fixed. This certainly a manufacturer GM problem.!! On the way they made the 2016 Duramax Chevy
I literally came to this video because I was wondering how to stop the fuel from coming out of the lines when you take the filter off. Boy do I feel stupid. It’s like common sense😂😂
Me gustó tu video compa
Got it done.. thank you
When everything is done, do you have to go and reset the trip button? I am doing my change on my duramax soon. Great video Thanks!
I'm not sure about the question. You mean reset the life timer on the infotainment system? You go to where it says change fuel filter, and hold down the ☑ to reset the timer or life counter
@@packwoodperformance4x474 yv
Hay you.... look who I found... looks like someone went to sunny Florida.. or so I hear... this is my old channel on UA-cam.. shit man I know we didn't hang out much when you where hear.. but I always liked you. Hit me up some time..shoot the breeze. Tell your dad I said hay..
Who's this?
Ken.. white van with push bar..
Oh hey man
Just saying hello. I know your cool and living the awesome tropical weather life and dont have time for small town folks..haha. just kidding. Lol
Great video bro thanks
Much appreciated bro💪
Excellent video
Thank you!
Also after change Fuel filter & new sensor water separator appears in dash light "water in fuel" so know how I could reset that light? Anybody?
I've never had that happen??? Unhook the battery for 5 min to reset.
@@packwoodperformance4x474
I did ..disconnect two batteries
For reset it but the warning light "water in fuel" still there , truck starts great, runs great , no check engine lights on but after change fuel filter & new sensor suddenly appeared that water in fuel warning light in dash , I did filled up with diesel the filters no need to use the pump for recharge filter I always did this way and never had issues
thanks 👍
Thanks !!
Trying to get new fuel filter screwed on but with big seal over center hole I can’t get it up to threads. Anyone know what I’m doing wrong. If I pull that center seal off it goes right on. Where it screws on the center is domed out down toward filter. It has a little button on it. Any advise?
Did the old one come out with the old filter?
Nice video!
Awesome
Good video
This is great video but I do have a question. The bleeder screw that is plastic. If the screwdriver don’t work because the top of it is wore down what would be the best way to open it?
The Plastic Bleeder Screw is a 13mm head with a flat head groove on top. If you can't get it with a 13mm socket, try a small flat screw driver. But heat it up a little to melt into the plastic. Time for a new one also.
@@packwoodperformance4x474 thanks. I appreciate it
I believe you tighten by hand as tight as you did and then 1/4 with filter wrench
Your right. Mine had a slow leak when I did that last time, so I tighten a little more.
Unrelated question how did you get those new style running boards to fit on this truck?
They make the new style knock off set that fit.
Good content but how do u reset the change fuel filter message?
If you don't have steering wheel controls you turn key to Acc. Then press and hold gas and brake peddles at 100% for 10 seconds.
Good video, thanKs!
Your Welcome. Thank you!
My truck has white smoke when idling and stepping in gas I just changed my fuel filter and oil and oil filter any ideas why it’s still smoking
Clogged injectors maybe.
When the truck has blueish white smoke. Means not enough fuel. Black smoke is alot of fuel.
Thanks bro🇺🇸
Well done video. The wheel splash liner makes easy access.Curious has created or made a small door or ? So you don’t have to remove the entire wheel well liner? Reason being is the bolts I have are attached to mud flaps etc and makes it more complicated. A smaller easy access door would be great. thanks
That is a good idea.. Newer Jeep Grand Cherokees and Dodge pick ups have a little spin off cap style door to change light bulbs in the fender well.
To be honest I’m doing this today for the 3 time for a customer. I just reach my arm up behind the inner fender, it’s flexible. Turn this into 15 min job. Gotta turn and burn make them dollars.
My 07 cat eye should be the same process right
Yes.
Frustration: you skipped the crucial part showing priming FF after bubbles come out
Do you pump until solid stream of fuel?
I didn't skip it. Very little bubbles come out. Should not be able to shoot a solid stream because the bleeder screw is still in there. It leaks out
@@packwoodperformance4x474 thanks for answering my question. With my screw halfway in, it goes from fuel with bubbles to solid squirt of fuel. I figured it out after doing it. Your video of course cannot anticipate everyone’s experience. I am definitely not a mechanic so the smallest detail easily thwarts me
I agree. I'm the same. No professional. Sometimes you just do it and figure out along the way.
Every 6/8 thousand miles?
They say change at 7,500. I usually change mine every 6,000
I’ve heard every 15,000 miles for fuel filter changes on LB7’s. Is that too long?
I believe 10,000 to 15,000 is what GM says. Or every other oil change. I change mine when the truck says to. And that seems to be about every 12,000 miles.
@@packwoodperformance4x474 I don’t think a 2001 Duramax has the capability to inform you, does it?
No, I don't think they started doing that till 2003
My filters are the bottom of my truck and I don’t have the bleeder pump and screw
Sounds like you have an aftermarket lift pump.
@@packwoodperformance4x474 not sure looks original it’s hard to find info here on you tube for my express van it’s 06 6.6 duramax lly engine
How do u reset the percentage used in the dash?
If you have steering wheel controls. There's one that looks like a enter button on a computer. You hold that for 10 seconds.
@@packwoodperformance4x474 awesome, thanks so much mate!
What is the sound that it made when you first cranked it? I just got one of these trucks and it's been worrying me?
Sounded normal.
👍
Good video tho
Katie let DAMION see his baby
Just throw in a cp3 and call it a day. Lol
Ahhh. It has a CP3. LMM not a LML
Still gotta change the fuel filter no matter what.
I just got this truck I guess you maybe traded it. I changed the fuel filter it hesitating to crank up. I even changed the fuel pump.
Really? If you want, we can trade contact info and I can tell you about it and maybe be some help.
I have a Facebook page you can private message me at.
Changed fuel filter now my truck is hesitant to start
Prime the filter pump
Did you put diesel into the filter?
I don't. You can. But when you prime it, it fills up.