NBS Silverado Gets A NNBS Intake Manifold With Xlink And A New Transmission
Вставка
- Опубліковано 4 лип 2021
- Today on Proyectos Los Carnales we went out to have a takuache day and help a fallen soldier. La Carnage a 2006 Silverado got upgraded with a NNBS intake manifold and a Xlink to help run a gold NNBS throttle body. There is a significant difference in throttle body sizes which help take in more air for more power. The last piece to the puzzle is a freshly built 4l60 upgraded to handle daily runs and the occasional burn out. Fun video to make on a fun and warm day hope you enjoy!
- Авто та транспорт
Eso verga! Finally someone that gets their hands dirty. Hope your channel keeps growing. Keep it up my guy.
🔥🔥🔥
Hey man can you show how to wire the 06 gmc fog lights I would appreciate it a lot
Me gustaría saber si te gusto ese intake ves que no se cual poner para mi gmc sierra
Hello, my dear brother. I want you to clarify. Is there a difference with you in the horsepower in the dyno, and how much is the difference?
What do ya suggest I do next after a tune and cammed ?
Transmission and stall to compliment the cam and differential too. After that have fun unless you want to dig into power adders. For more hp without turbo supercharger or nitrous you can do ported/polished heads intake and throttle body it’s all up to how deep you want to go with it 👍🏽
How did u make the swap is the nnbs intake has different shape on the intake gaskets to the nbs intake
Did you have any issues with the xlink?
no its been running a while now and no issues we used a new oem throttle body with correct the x-link make sure you get the correct one weather it is for a gold blade or silver blade
@@proyectosloscarnales4512did you use the new c1 convertible xlink? Or gold or silver? Did you need to tune it or just plug and play for the throttle body to work properly
So I don’t have to change nothing to add the 07-13 intake to my 04 4.8? It will fit straight up to it?
depends if it is a drive by wire you will need an x-link and a new throttle body if it is a drive by cable you will need a aftermarket throttle body aside from that check the fuel lines if your intake has a return line you will need a corvette filter to just have one line out to the intake if it doesn't then the single line in the top will just plug into the nnbs intake
@@proyectosloscarnales4512 really means a lot bro ur help but I can use just the 3 bolt plate to use the same throttle right?
Correct, however I want to say the plates is 25ish and a 92mm is around 80 and it’ll flow better (I used an Amazon/eBay one and to this day no issues with it just use your oem sensors from the old throttle body) also make sure you get the nnbs gaskets for the manifold not the nbs gaskets
@@proyectosloscarnales4512 thanks brother for all this advice👍🏻🙏🏻
@@proyectosloscarnales4512 brother i wanna bother you with what happen with the injectors? I just don’t get it? Did the injectors from the nnbs intake are the same plugs from the original harness or you use the same injectors in new intake?
What part number for the spacers?
How much horsepower should I expect if I add this intake?
About 25
What part number on spacers
Sheesh
Where’s ur shop at ?
That red truck slow asf